Enable MFC device on the Goni board using the S5PV210 SoC.
Signed-off-by: Kamil Debski <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
---
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/mach-s5pv210/mach-goni.c | 10 ++++++++++
2 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 37b5a97..a06acce 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -90,6 +90,7 @@ config MACH_GONI
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_I2C2
+ select S5P_DEV_MFC
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
select SAMSUNG_DEV_KEYPAD
diff --git a/arch/arm/mach-s5pv210/mach-goni.c
b/arch/arm/mach-s5pv210/mach-goni.c
index 31d5aa7..50f2cc7 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -47,6 +47,7 @@
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/s5p-time.h>
+#include <plat/mfc.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -808,6 +809,9 @@ static struct platform_device *goni_devices[] __initdata = {
&goni_i2c_gpio5,
&mmc2_fixed_voltage,
&goni_device_gpiokeys,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
&s3c_device_i2c0,
&s5p_device_fimc0,
&s5p_device_fimc1,
@@ -841,6 +845,11 @@ static void __init goni_map_io(void)
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void __init goni_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init goni_machine_init(void)
{
/* Radio: call before I2C 1 registeration */
@@ -893,4 +902,5 @@ MACHINE_START(GONI, "GONI")
.map_io = goni_map_io,
.init_machine = goni_machine_init,
.timer = &s5p_timer,
+ .reserve = &goni_reserve,
MACHINE_END
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
