Joonyoung Shim wrote:
>
> PWM timers use pclk("timers" clk) as parent clk. If this pclk is the
> disabled state when PWM driver is probed, then it causes wrong read and
> write operation about registers of PWM.
>
> Signed-off-by: Joonyoung Shim <jy0922.s...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> arch/arm/plat-samsung/pwm.c | 7 +++++++
> 1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
> index f37457c..dc1185d 100644
> --- a/arch/arm/plat-samsung/pwm.c
> +++ b/arch/arm/plat-samsung/pwm.c
> @@ -299,6 +299,9 @@ static int s3c_pwm_probe(struct platform_device *pdev)
> goto err_clk_tin;
> }
>
> + clk_enable(pwm->clk);
> + clk_enable(pwm->clk_div);
> +
> local_irq_save(flags);
>
> tcon = __raw_readl(S3C2410_TCON);
> @@ -326,6 +329,8 @@ static int s3c_pwm_probe(struct platform_device *pdev)
> return 0;
>
> err_clk_tdiv:
> + clk_disable(pwm->clk_div);
> + clk_disable(pwm->clk);
> clk_put(pwm->clk_div);
>
> err_clk_tin:
> @@ -340,6 +345,8 @@ static int __devexit s3c_pwm_remove(struct
> platform_device *pdev)
> {
> struct pwm_device *pwm = platform_get_drvdata(pdev);
>
> + clk_disable(pwm->clk_div);
> + clk_disable(pwm->clk);
> clk_put(pwm->clk_div);
> clk_put(pwm->clk);
> kfree(pwm);
> --
> 1.7.5.4
Well, I wonder when this is needed. I think it should be enabled during
kernel booting...
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
