As SPI platform devices are consolidated to plat-samsung, some corresponding changes are required in the respective machine file. SPI platform specific data is initialized in the corresponding machine file.
Signed-off-by: Padmavathi Venna <[email protected]> --- arch/arm/mach-s3c64xx/Kconfig | 3 ++- arch/arm/mach-s3c64xx/mach-crag6410.c | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 4388186..90b34ab 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -281,6 +281,7 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_SETUP_IDE select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_SPI select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD select S3C_DEV_USB_HOST @@ -291,7 +292,7 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_I2C1 select S3C_DEV_WDT select S3C_DEV_RTC - select S3C64XX_DEV_SPI + select S3C64XX_DEV_SPI0 select S3C24XX_GPIO_EXTRA128 select I2C help diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index d04b654..aa3fe8f 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -669,6 +669,15 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { .cfg_gpio = crag6410_cfg_sdhci0, }; +#ifdef CONFIG_S3C64XX_DEV_SPI0 +static struct s3c64xx_spi_info crag6410_spi0_pdata __initdata = { + .cfg_gpio = s3c64xx_spi0_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .tx_st_done = 21, +}; +#endif + static void __init crag6410_machine_init(void) { /* Open drain IRQs need pullups */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
