Dear Mr. Park,
On 5 December 2011 15:44, Kyungmin Park <[email protected]> wrote:
[...]
>> static struct regulator_init_data __initdata max8997_ldo1_data = {
>> @@ -379,11 +379,11 @@ static struct regulator_init_data __initdata
>> max8997_buck5_data = {
>> static struct regulator_init_data __initdata max8997_buck7_data = {
>> .constraints = {
>> .name = "VDD_LCD_3.3V",
>> - .min_uV = 3300000,
>> - .max_uV = 3300000,
>> + .min_uV = 750000,
>> + .max_uV = 3900000,
> It can support the voltage change at buck itself, but in board it's
> fixed. I'm not sure it's correct usage at board file.
>
> I think original code is better to understand and use it as name, it's
> fixed v3.3 voltage.
Yes, that is true. If the board cannot support any other voltage for
buck7, there is no need to change min_uV and max_uV. I will revert it
to the original values.
Thanks,
Thomas.
>
> Thank you,
> Kyungmin Park
[...]
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
