Mark Brown wrote: > > The WM8962 on Tobermory has one of the IN4 inputs connected for DC > measurement. Tell the driver it can optimise for this mode. > > Signed-off-by: Mark Brown <[email protected]> > --- > > This feature is going to be merged via ASoC in 3.4 - is it OK if I apply > this patch to the ASoC tree too? It's a one liner, I'd be astonished if > it were to generate any conflicts. > Yes, would be better. If required, please go ahead with my ack: Acked-by: Kukjin Kim <[email protected]>
Thanks. Best regards, Kgene. -- Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > arch/arm/mach-s3c64xx/mach-crag6410-module.c | 1 + > 1 files changed, 1 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach- > s3c64xx/mach-crag6410-module.c > index 509307d..317f866 100644 > --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c > +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c > @@ -128,6 +128,7 @@ static struct wm8962_pdata wm8962_pdata __initdata = { > 0x8000 | WM8962_GPIO_FN_DMICDAT, > WM8962_GPIO_FN_IRQ, /* Open drain mode */ > }, > + .in4_dc_measure = true, > }; > > static struct wm9081_pdata wm9081_pdata __initdata = { > -- > 1.7.9.rc1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
