On 02/03/12 17:09, 김경일 wrote:
> This patch adds clocks, gpio configs and platform devices for EXYNOS5 SPI.
> And also the spi clock and gpio setup are added in the smdk5250_machine_init.
>
> Signed-off-by: Kyoungil Kim<ki0351....@samsung.com>
> ---
> arch/arm/mach-exynos/clock-exynos5.c | 89 +++++++++++++++
> arch/arm/mach-exynos/include/mach/map.h | 13 ++-
> arch/arm/mach-exynos/include/mach/regs-clock.h | 4 +
> arch/arm/mach-exynos/mach-smdk5250.c | 108 ++++++++++++++++++-
> arch/arm/mach-exynos/setup-spi.c | 129
> ++++++++++++++++++++--
> arch/arm/plat-samsung/include/plat/s3c64xx-spi.h | 4 +
> 6 files changed, 330 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/clock-exynos5.c
> b/arch/arm/mach-exynos/clock-exynos5.c
> index b43161b..d6fa729 100644
> --- a/arch/arm/mach-exynos/clock-exynos5.c
> +++ b/arch/arm/mach-exynos/clock-exynos5.c
> @@ -83,6 +83,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk
> *clk, int enable)
> return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
> }
>
> +static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
> +}
> +
> static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
> {
> return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
> @@ -641,6 +646,21 @@ static struct clk exynos5_init_clocks_off[] = {
> .parent =&exynos5_clk_aclk_66.clk,
> .enable = exynos5_clk_ip_peric_ctrl,
> .ctrlbit = (1<< 14),
> + }, {
> + .name = "spi",
> + .devname = "s3c64xx-spi.0",
> + .enable = exynos5_clk_ip_peric_ctrl,
> + .ctrlbit = (1<< 16),
> + }, {
> + .name = "spi",
> + .devname = "s3c64xx-spi.1",
> + .enable = exynos5_clk_ip_peric_ctrl,
> + .ctrlbit = (1<< 17),
> + }, {
> + .name = "spi",
> + .devname = "s3c64xx-spi.2",
> + .enable = exynos5_clk_ip_peric_ctrl,
> + .ctrlbit = (1<< 18),
> }
> };
>
> @@ -865,6 +885,66 @@ static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
> .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
> };
>
> +static struct clksrc_clk exynos5_clk_dout_spi0 = {
> + .clk = {
> + .name = "dout_spi0",
> + },
> + .sources =&exynos5_clkset_group,
> + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
> + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
> +};
> +
> +static struct clksrc_clk exynos5_clk_dout_spi1 = {
> + .clk = {
> + .name = "dout_spi1",
> + },
> + .sources =&exynos5_clkset_group,
> + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
> + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
> +};
> +
> +static struct clksrc_clk exynos5_clk_dout_spi2 = {
> + .clk = {
> + .name = "dout_spi2",
> + },
> + .sources =&exynos5_clkset_group,
> + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
> + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
> +};
> +
> +static struct clksrc_clk exynos5_clk_sclk_spi0 = {
> + .clk = {
> + .name = "sclk_spi",
> + .devname = "s3c64xx-spi.0",
> + .parent =&exynos5_clk_dout_spi0.clk,
> + .enable = exynos5_clksrc_mask_peric1_ctrl,
> + .ctrlbit = (1<< 16),
> + },
> + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
> +};
> +
> +static struct clksrc_clk exynos5_clk_sclk_spi1 = {
> + .clk = {
> + .name = "sclk_spi",
> + .devname = "s3c64xx-spi.1",
> + .parent =&exynos5_clk_dout_spi1.clk,
> + .enable = exynos5_clksrc_mask_peric1_ctrl,
> + .ctrlbit = (1<< 20),
> + },
> + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
> +};
> +
> +static struct clksrc_clk exynos5_clk_sclk_spi2 = {
> + .clk = {
> + .name = "sclk_spi",
> + .devname = "s3c64xx-spi.2",
> + .parent =&exynos5_clk_dout_spi2.clk,
> + .enable = exynos5_clksrc_mask_peric1_ctrl,
> + .ctrlbit = (1<< 24),
> + },
> + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
> +};
> +
> static struct clksrc_clk exynos5_clksrcs[] = {
> {
> .clk = {
> @@ -977,6 +1057,9 @@ static struct clksrc_clk *exynos5_sysclks[] = {
> &exynos5_clk_dout_mmc4,
> &exynos5_clk_aclk_acp,
> &exynos5_clk_pclk_acp,
> + &exynos5_clk_dout_spi0,
> + &exynos5_clk_dout_spi1,
> + &exynos5_clk_dout_spi2,
> };
>
> static struct clk *exynos5_clk_cdev[] = {
> @@ -994,6 +1077,9 @@ static struct clksrc_clk *exynos5_clksrc_cdev[] = {
> &exynos5_clk_sclk_mmc1,
> &exynos5_clk_sclk_mmc2,
> &exynos5_clk_sclk_mmc3,
> + &exynos5_clk_sclk_spi0,
> + &exynos5_clk_sclk_spi1,
> + &exynos5_clk_sclk_spi2,
> };
>
> static struct clk_lookup exynos5_clk_lookup[] = {
> @@ -1008,6 +1094,9 @@ static struct clk_lookup exynos5_clk_lookup[] = {
> CLKDEV_INIT("dma-pl330.0", "apb_pclk",&exynos5_clk_pdma0),
> CLKDEV_INIT("dma-pl330.1", "apb_pclk",&exynos5_clk_pdma1),
> CLKDEV_INIT("dma-pl330.2", "apb_pclk",&exynos5_clk_mdma),
> + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0",&exynos5_clk_sclk_spi0.clk),
> + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0",&exynos5_clk_sclk_spi1.clk),
> + CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0",&exynos5_clk_sclk_spi2.clk),
> };
>
> static unsigned long exynos5_epll_get_rate(struct clk *clk)
> diff --git a/arch/arm/mach-exynos/include/mach/map.h
> b/arch/arm/mach-exynos/include/mach/map.h
> index 7cdeae0..1c25dc9 100644
> --- a/arch/arm/mach-exynos/include/mach/map.h
> +++ b/arch/arm/mach-exynos/include/mach/map.h
> @@ -108,6 +108,9 @@
> #define EXYNOS4_PA_SPI0 0x13920000
> #define EXYNOS4_PA_SPI1 0x13930000
> #define EXYNOS4_PA_SPI2 0x13940000
> +#define EXYNOS5_PA_SPI0 0x12D20000
> +#define EXYNOS5_PA_SPI1 0x12D30000
> +#define EXYNOS5_PA_SPI2 0x12D40000
>
> #define EXYNOS4_PA_GPIO1 0x11400000
> #define EXYNOS4_PA_GPIO2 0x11000000
> @@ -177,10 +180,6 @@
> #define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
> #define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
>
> -#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
> -#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
> -#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
> -
> #define S5P_PA_EHCI EXYNOS4_PA_EHCI
> #define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
> #define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
> @@ -210,6 +209,9 @@
> #define EXYNOS_PA_PDMA0 EXYNOS4_PA_PDMA0
> #define EXYNOS_PA_PDMA1 EXYNOS4_PA_PDMA1
> #define EXYNOS_PA_MDMA1 EXYNOS4_PA_MDMA1
> +#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
> +#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
> +#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
> #endif
>
> #ifdef CONFIG_ARCH_EXYNOS5
> @@ -219,6 +221,9 @@
> #define EXYNOS_PA_PDMA0 EXYNOS5_PA_PDMA0
> #define EXYNOS_PA_PDMA1 EXYNOS5_PA_PDMA1
> #define EXYNOS_PA_MDMA1 EXYNOS5_PA_MDMA1
> +#define S3C_PA_SPI0 EXYNOS5_PA_SPI0
> +#define S3C_PA_SPI1 EXYNOS5_PA_SPI1
> +#define S3C_PA_SPI2 EXYNOS5_PA_SPI2
> #endif
>
> /* Compatibility UART */
> diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h
> b/arch/arm/mach-exynos/include/mach/regs-clock.h
> index 113836b..b994633 100644
> --- a/arch/arm/mach-exynos/include/mach/regs-clock.h
> +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
> @@ -226,12 +226,14 @@
> #define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C)
> #define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244)
> #define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250)
> +#define EXYNOS5_CLKSRC_PERIC1 EXYNOS_CLKREG(0x10254)
>
> #define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310)
> #define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320)
> #define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C)
> #define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340)
> #define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350)
> +#define EXYNOS5_CLKSRC_MASK_PERIC1 EXYNOS_CLKREG(0x10354)
>
> #define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510)
> #define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514)
> @@ -243,6 +245,8 @@
> #define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550)
> #define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554)
> #define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
> +#define EXYNOS5_CLKDIV_PERIC1 EXYNOS_CLKREG(0x1055C)
> +#define EXYNOS5_CLKDIV_PERIC2 EXYNOS_CLKREG(0x10560)
>
> #define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
> #define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
> diff --git a/arch/arm/mach-exynos/mach-smdk5250.c
> b/arch/arm/mach-exynos/mach-smdk5250.c
> index 0fe4a0b..0c55bfa 100644
> --- a/arch/arm/mach-exynos/mach-smdk5250.c
> +++ b/arch/arm/mach-exynos/mach-smdk5250.c
> @@ -11,6 +11,9 @@
>
> #include<linux/platform_device.h>
> #include<linux/serial_core.h>
> +#include<linux/clk.h>
> +#include<linux/gpio.h>
> +#include<linux/spi/spi.h>
>
> #include<asm/mach/arch.h>
> #include<asm/hardware/gic.h>
> @@ -18,9 +21,13 @@
>
> #include<plat/clock.h>
> #include<plat/cpu.h>
> +#include<plat/devs.h>
> +#include<plat/gpio-cfg.h>
> #include<plat/regs-serial.h>
> +#include<plat/s3c64xx-spi.h>
>
> #include<mach/map.h>
> +#include<mach/spi-clocks.h>
>
> #include "common.h"
>
> @@ -69,6 +76,72 @@ static struct s3c2410_uartcfg smdk5250_uartcfgs[]
> __initdata = {
> },
> };
>
> +static struct s3c64xx_spi_csinfo spi0_csi[] = {
> + [0] = {
> + .line = EXYNOS5_GPA2(1),
> + .set_level = gpio_set_value,
> + .fb_delay = 0x2,
> + },
> +};
> +
> +static struct spi_board_info spi0_board_info[] __initdata = {
> + {
> + .modalias = "spidev",
> + .platform_data = NULL,
> + .max_speed_hz = 10*1000*1000,
> + .bus_num = 0,
> + .chip_select = 0,
> + .mode = SPI_MODE_0,
> + .controller_data =&spi0_csi[0],
> + }
> +};
> +
> +static struct s3c64xx_spi_csinfo spi1_csi[] = {
> + [0] = {
> + .line = EXYNOS5_GPA2(5),
> + .set_level = gpio_set_value,
> + .fb_delay = 0x2,
> + },
> +};
> +
> +static struct spi_board_info spi1_board_info[] __initdata = {
> + {
> + .modalias = "spidev",
> + .platform_data = NULL,
> + .max_speed_hz = 10*1000*1000,
> + .bus_num = 1,
> + .chip_select = 0,
> + .mode = SPI_MODE_0,
> + .controller_data =&spi1_csi[0],
> + }
> +};
> +
> +static struct s3c64xx_spi_csinfo spi2_csi[] = {
> + [0] = {
> + .line = EXYNOS5_GPB1(2),
> + .set_level = gpio_set_value,
> + .fb_delay = 0x2,
> + },
> +};
> +
> +static struct spi_board_info spi2_board_info[] __initdata = {
> + {
> + .modalias = "spidev",
> + .platform_data = NULL,
> + .max_speed_hz = 10*1000*1000,
> + .bus_num = 2,
> + .chip_select = 0,
> + .mode = SPI_MODE_0,
> + .controller_data =&spi2_csi[0],
> + }
> +};
> +
> +static struct platform_device *smdk5250_devices[] __initdata = {
> + &s3c64xx_device_spi0,
> + &s3c64xx_device_spi1,
> + &s3c64xx_device_spi2,
> +};
> +
> static void __init smdk5250_map_io(void)
> {
> clk_xusbxti.rate = 24000000;
> @@ -80,7 +153,40 @@ static void __init smdk5250_map_io(void)
>
> static void __init smdk5250_machine_init(void)
> {
> - /* nothing here yet */
> + platform_add_devices(smdk5250_devices, ARRAY_SIZE(smdk5250_devices));
> +
> + exynos_spi_clock_setup(&s3c64xx_device_spi0.dev, 0);
> + exynos_spi_clock_setup(&s3c64xx_device_spi1.dev, 1);
> + exynos_spi_clock_setup(&s3c64xx_device_spi2.dev, 2);
> +
> + if (!exynos_spi_cfg_cs(spi0_csi[0].line, 0)) {
> + s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata,
> + EXYNOS_SPI_SRCCLK_SCLK, ARRAY_SIZE(spi0_csi));
> +
> + spi_register_board_info(spi0_board_info,
> + ARRAY_SIZE(spi0_board_info));
> + } else
> + printk(KERN_ERR "Error requesting gpio for SPI-CH0 CS\n");
> +
> +
> + if (!exynos_spi_cfg_cs(spi1_csi[0].line, 1)) {
> + s3c64xx_spi1_set_platdata(&s3c64xx_spi1_pdata,
> + EXYNOS_SPI_SRCCLK_SCLK, ARRAY_SIZE(spi1_csi));
> +
> + spi_register_board_info(spi1_board_info,
> + ARRAY_SIZE(spi1_board_info));
> + } else
> + printk(KERN_ERR "Error requesting gpio for SPI-CH1 CS\n");
> +
> +
> + if (!exynos_spi_cfg_cs(spi2_csi[0].line, 2)) {
> + s3c64xx_spi2_set_platdata(&s3c64xx_spi2_pdata,
> + EXYNOS_SPI_SRCCLK_SCLK, ARRAY_SIZE(spi2_csi));
> +
> + spi_register_board_info(spi2_board_info,
> + ARRAY_SIZE(spi2_board_info));
> + } else
> + printk(KERN_ERR "Error requesting gpio for SPI-CH2 CS\n");
> }
>
> MACHINE_START(SMDK5250, "SMDK5250")
> diff --git a/arch/arm/mach-exynos/setup-spi.c
> b/arch/arm/mach-exynos/setup-spi.c
> index 833ff40..60c8037 100644
> --- a/arch/arm/mach-exynos/setup-spi.c
> +++ b/arch/arm/mach-exynos/setup-spi.c
> @@ -8,12 +8,71 @@
> * published by the Free Software Foundation.
> */
>
> +#include<linux/clk.h>
> +#include<linux/err.h>
> #include<linux/gpio.h>
> #include<linux/platform_device.h>
>
> +#include<plat/clock.h>
> +#include<plat/cpu.h>
> #include<plat/gpio-cfg.h>
> #include<plat/s3c64xx-spi.h>
>
> +int exynos_spi_cfg_cs(int gpio, int ch_num)
> +{
> + char cs_name[16];
> +
> + sprintf(cs_name, "dout_spi%d", ch_num);
> +
> + if (!gpio_request(gpio, cs_name)) {
> + gpio_direction_output(gpio, 1);
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(1));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> + gpio_free(gpio);
> +
> + return 0;
> + }
> +
> + return -EIO;
> +}
> +
> +void exynos_spi_clock_setup(struct device *spi_dev, int ch_num)
> +{
> + struct clk *child_clk = NULL;
> + struct clk *parent_clk = NULL;
> + char clk_name[16];
> +
> + sprintf(clk_name, "dout_spi%d", ch_num);
> + child_clk = clk_get(spi_dev, clk_name);
> +
> + if (IS_ERR(child_clk)) {
> + printk(KERN_ERR "Failed to get %s clk\n", clk_name);
> + return;
> + }
> +
> + parent_clk = clk_get(spi_dev, "mout_mpll_user");
> +
> + if (IS_ERR(parent_clk)) {
> + printk(KERN_ERR "Failed to get mout_mpll_user clk\n");
> + goto err1;
> + }
> +
> + if (clk_set_parent(child_clk, parent_clk)) {
> + printk(KERN_ERR "Unable to set parent %s of clock %s\n",
> + parent_clk->name, child_clk->name);
> + goto err2;
> + }
> +
> + if (clk_set_rate(child_clk, 800 * 1000 * 1000))
> + printk(KERN_ERR "Unable to set rate of clock %s\n",
> + child_clk->name);
> +
> +err2:
> + clk_put(parent_clk);
> +err1:
> + clk_put(child_clk);
> +}
> +
> #ifdef CONFIG_S3C64XX_DEV_SPI0
> struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
> .fifo_lvl_mask = 0x1ff,
> @@ -25,10 +84,26 @@ struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
>
> int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
> {
> - s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
> - s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
> - s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
> - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
> + int gpio;
> +
> + if (soc_is_exynos5250()) {
> + s3c_gpio_cfgpin(EXYNOS5_GPA2(0), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(EXYNOS5_GPA2(0), S3C_GPIO_PULL_UP);
> + s3c_gpio_cfgall_range(EXYNOS5_GPA2(2), 2,
> + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
> +
> + for (gpio = EXYNOS5_GPA2(0); gpio< EXYNOS5_GPA2(4); gpio++)
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
> + } else {
> + s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
> + s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
> + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
> +
> + for (gpio = EXYNOS4_GPB(0); gpio< EXYNOS4_GPB(4); gpio++)
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
> + }
> +
> return 0;
> }
> #endif
> @@ -44,10 +119,25 @@ struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
>
> int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
> {
> - s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
> - s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
> - s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
> - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
> + int gpio;
> +
> + if (soc_is_exynos5250()) {
> + s3c_gpio_cfgpin(EXYNOS5_GPA2(4), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(EXYNOS5_GPA2(4), S3C_GPIO_PULL_UP);
> + s3c_gpio_cfgall_range(EXYNOS5_GPA2(6), 2,
> + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
> +
> + for (gpio = EXYNOS5_GPA2(4); gpio< EXYNOS5_GPA2(8); gpio++)
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
> + } else {
> + s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
> + s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
> + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
> +
> + for (gpio = EXYNOS4_GPB(4); gpio< EXYNOS4_GPB(8); gpio++)
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
> + }
> return 0;
> }
> #endif
> @@ -63,10 +153,25 @@ struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
>
> int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
> {
> - s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
> - s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
> - s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
> - S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
> + int gpio;
> +
> + if (soc_is_exynos5250()) {
> + s3c_gpio_cfgpin(EXYNOS5_GPB1(1), S3C_GPIO_SFN(5));
> + s3c_gpio_setpull(EXYNOS5_GPB1(1), S3C_GPIO_PULL_UP);
> + s3c_gpio_cfgall_range(EXYNOS5_GPB1(3), 2,
> + S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
> +
> + for (gpio = EXYNOS5_GPB1(1); gpio< EXYNOS5_GPB1(5); gpio++)
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
> + } else {
> + s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
> + s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
> + s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
> + S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
> +
> + for (gpio = EXYNOS4_GPC1(1); gpio< EXYNOS4_GPC1(5); gpio++)
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV3);
> + }
> return 0;
> }
> #endif
> diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
> b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
> index fa95e9a..ff4c301 100644
> --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
> +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
> @@ -74,6 +74,10 @@ extern void s3c64xx_spi1_set_platdata(struct
> s3c64xx_spi_info *pd,
> extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
> int src_clk_nr, int num_cs);
>
> +/* defined to setup chip select GPIO and clock of SPI */
> +extern int exynos_spi_cfg_cs(int gpio, int ch_num);
> +extern void exynos_spi_clock_setup(struct device *spi_dev, int ch_num);
> +
> /* defined by architecture to configure gpio */
> extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
> extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
Hi,
There is no board file, mach-smdk5250.c for EXYNOS5 so this should be
updated.
Please re-submit this for exynos5250 SPI with dt.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
