Also use EXYNOS4210_GPIO_Ex instead of EXYNOS4_GPIO_Ex. The GPEx gpios
exist only on Exynos4210 and there are no on Exynos4x12. Redefine them
to exact SoC name.
Signed-off-by: Joonyoung Shim<jy0922.s...@samsung.com>
Signed-off-by: Kyungmin Park<kyungmin.p...@samsung.com>
---
arch/arm/mach-exynos/include/mach/gpio.h | 32 ++++++++++++++--------------
arch/arm/mach-exynos/mach-nuri.c | 16 +++++++-------
arch/arm/mach-exynos/mach-origen.c | 6 ++--
arch/arm/mach-exynos/mach-universal_c210.c | 32 ++++++++++++++--------------
arch/arm/mach-exynos/setup-fimc.c | 4 +-
drivers/gpio/gpio-samsung.c | 20 ++++++++--------
6 files changed, 55 insertions(+), 55 deletions(-)
diff --git a/arch/arm/mach-exynos/include/mach/gpio.h
b/arch/arm/mach-exynos/include/mach/gpio.h
index eb24f1e..21c9bf1 100644
--- a/arch/arm/mach-exynos/include/mach/gpio.h
+++ b/arch/arm/mach-exynos/include/mach/gpio.h
@@ -26,11 +26,11 @@
#define EXYNOS4_GPIO_C1_NR (5)
#define EXYNOS4_GPIO_D0_NR (4)
#define EXYNOS4_GPIO_D1_NR (4)
-#define EXYNOS4_GPIO_E0_NR (5)
-#define EXYNOS4_GPIO_E1_NR (8)
-#define EXYNOS4_GPIO_E2_NR (6)
-#define EXYNOS4_GPIO_E3_NR (8)
-#define EXYNOS4_GPIO_E4_NR (8)
+#define EXYNOS4210_GPIO_E0_NR (5)
+#define EXYNOS4210_GPIO_E1_NR (8)
+#define EXYNOS4210_GPIO_E2_NR (6)
+#define EXYNOS4210_GPIO_E3_NR (8)
+#define EXYNOS4210_GPIO_E4_NR (8)
#define EXYNOS4_GPIO_F0_NR (8)
#define EXYNOS4_GPIO_F1_NR (8)
#define EXYNOS4_GPIO_F2_NR (8)
@@ -67,12 +67,12 @@ enum exynos4_gpio_number {
EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0),
EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1),
EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0),
- EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
- EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0),
- EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1),
- EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2),
- EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3),
- EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4),
+ EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
+ EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E0),
+ EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E1),
+ EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E2),
+ EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E3),
+ EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E4),
EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0),
EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1),
EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2),
@@ -108,11 +108,11 @@ enum exynos4_gpio_number {
#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr))
#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr))
#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr))
-#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr))
-#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr))
-#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr))
-#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr))
-#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr))
+#define EXYNOS4210_GPE0(_nr) (EXYNOS4210_GPIO_E0_START + (_nr))
+#define EXYNOS4210_GPE1(_nr) (EXYNOS4210_GPIO_E1_START + (_nr))
+#define EXYNOS4210_GPE2(_nr) (EXYNOS4210_GPIO_E2_START + (_nr))
+#define EXYNOS4210_GPE3(_nr) (EXYNOS4210_GPIO_E3_START + (_nr))
+#define EXYNOS4210_GPE4(_nr) (EXYNOS4210_GPIO_E4_START + (_nr))
#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr))
#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr))
#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr))
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 5784b0a..d02c429 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -264,7 +264,7 @@ static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
{
- int gpio = EXYNOS4_GPE1(5);
+ int gpio = EXYNOS4210_GPE1(5);
gpio_request(gpio, "LVDS_nSHDN");
gpio_direction_output(gpio, power);
@@ -273,7 +273,7 @@ static void nuri_lcd_power_on(struct plat_lcd_data *pd,
unsigned int power)
static int nuri_bl_init(struct device *dev)
{
- return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
+ return gpio_request_one(EXYNOS4210_GPE2(3), GPIOF_OUT_INIT_LOW,
"LCD_LD0_EN");
}
@@ -282,14 +282,14 @@ static int nuri_bl_notify(struct device *dev, int
brightness)
if (brightness< 1)
brightness = 0;
- gpio_set_value(EXYNOS4_GPE2(3), 1);
+ gpio_set_value(EXYNOS4210_GPE2(3), 1);
return brightness;
}
static void nuri_bl_exit(struct device *dev)
{
- gpio_free(EXYNOS4_GPE2(3));
+ gpio_free(EXYNOS4210_GPE2(3));
}
/* nuri pwm backlight */
@@ -1042,7 +1042,7 @@ static struct max8903_pdata nuri_max8903 = {
*/
.dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
/* uok, usus: not connected */
- .chg = EXYNOS4_GPE2(0), /* TA_nCHG */
+ .chg = EXYNOS4210_GPE2(0), /* TA_nCHG */
/* flt: vcc_1.8V_pda */
.dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
@@ -1114,7 +1114,7 @@ static struct regulator_init_data
cam_vt_cam15_reg_init_data = {
static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
.supply_name = "VT_CAM_1.5V",
.microvolts = 1500000,
- .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
+ .gpio = EXYNOS4210_GPE2(2), /* VT_CAM_1.5V_EN */
.enable_high = 1,
.init_data =&cam_vt_cam15_reg_init_data,
};
@@ -1138,7 +1138,7 @@ static struct regulator_init_data cam_vdda_reg_init_data
= {
static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
.supply_name = "CAM_IO_EN",
.microvolts = 2800000,
- .gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */
+ .gpio = EXYNOS4210_GPE2(1), /* CAM_IO_EN */
.enable_high = 1,
.init_data =&cam_vdda_reg_init_data,
};
@@ -1162,7 +1162,7 @@ static struct regulator_init_data
cam_8m_12v_reg_init_data = {
static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
.supply_name = "8M_1.2V",
.microvolts = 1200000,
- .gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
+ .gpio = EXYNOS4210_GPE2(5), /* 8M_1.2V_EN */
.enable_high = 1,
.init_data =&cam_8m_12v_reg_init_data,
};
diff --git a/arch/arm/mach-exynos/mach-origen.c
b/arch/arm/mach-exynos/mach-origen.c
index 26124a3..753bbd4 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -560,13 +560,13 @@ static void lcd_hv070wsa_set_power(struct plat_lcd_data
*pd, unsigned int power)
int ret;
if (power)
- ret = gpio_request_one(EXYNOS4_GPE3(4),
+ ret = gpio_request_one(EXYNOS4210_GPE3(4),
GPIOF_OUT_INIT_HIGH, "GPE3_4");
else
- ret = gpio_request_one(EXYNOS4_GPE3(4),
+ ret = gpio_request_one(EXYNOS4210_GPE3(4),
GPIOF_OUT_INIT_LOW, "GPE3_4");
- gpio_free(EXYNOS4_GPE3(4));
+ gpio_free(EXYNOS4210_GPE3(4));
if (ret)
pr_err("failed to request gpio for LCD power: %d\n", ret);
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c
b/arch/arm/mach-exynos/mach-universal_c210.c
index 27fab53..6ea74e6 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -545,7 +545,7 @@ static struct max8998_platform_data universal_lp3974_pdata
= {
.buck2_voltage1 = 1200000, /* G3D */
.buck2_voltage2 = 1100000,
.buck1_default_idx = 0,
- .buck2_set3 = EXYNOS4_GPE2(0),
+ .buck2_set3 = EXYNOS4210_GPE2(0),
.buck2_default_idx = 0,
.wakeup = true,
};
@@ -574,7 +574,7 @@ static struct regulator_init_data
hdmi_fixed_voltage_init_data = {
static struct fixed_voltage_config hdmi_fixed_voltage_config = {
.supply_name = "HDMI_EN1",
.microvolts = 5000000,
- .gpio = EXYNOS4_GPE0(1),
+ .gpio = EXYNOS4210_GPE0(1),
.enable_high = true,
.init_data =&hdmi_fixed_voltage_init_data,
};
@@ -623,12 +623,12 @@ static void __init universal_tsp_init(void)
int gpio;
/* TSP_LDO_ON: XMDMADDR_11 */
- gpio = EXYNOS4_GPE2(3);
+ gpio = EXYNOS4210_GPE2(3);
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
gpio_export(gpio, 0);
/* TSP_INT: XMDMADDR_7 */
- gpio = EXYNOS4_GPE1(7);
+ gpio = EXYNOS4210_GPE1(7);
gpio_request(gpio, "TSP_INT");
s5p_register_gpio_interrupt(gpio);
@@ -654,8 +654,8 @@ static struct mcs_platform_data touchkey_data = {
/* GPIO I2C 3_TOUCH 2.8V */
#define I2C_GPIO_BUS_12 12
static struct i2c_gpio_platform_data i2c_gpio12_data = {
- .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
- .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
+ .sda_pin = EXYNOS4210_GPE4(0), /* XMDMDATA_8 */
+ .scl_pin = EXYNOS4210_GPE4(1), /* XMDMDATA_9 */
};
static struct platform_device i2c_gpio12 = {
@@ -677,13 +677,13 @@ static void __init universal_touchkey_init(void)
{
int gpio;
- gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
+ gpio = EXYNOS4210_GPE3(7); /* XMDMDATA_7 */
gpio_request(gpio, "3_TOUCH_INT");
s5p_register_gpio_interrupt(gpio);
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
- gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
+ gpio = EXYNOS4210_GPE3(3); /* XMDMDATA_3 */
gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
}
@@ -769,7 +769,7 @@ static struct regulator_init_data
mmc0_fixed_voltage_init_data = {
static struct fixed_voltage_config mmc0_fixed_voltage_config = {
.supply_name = "MASSMEMORY_EN",
.microvolts = 2800000,
- .gpio = EXYNOS4_GPE1(3),
+ .gpio = EXYNOS4210_GPE1(3),
.enable_high = true,
.init_data =&mmc0_fixed_voltage_init_data,
};
@@ -876,7 +876,7 @@ static struct regulator_init_data cam_vt_dio_reg_init_data
= {
static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
.supply_name = "CAM_VT_D_IO",
.microvolts = 2800000,
- .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
+ .gpio = EXYNOS4210_GPE2(1), /* CAM_PWR_EN2 */
.enable_high = 1,
.init_data =&cam_vt_dio_reg_init_data,
};
@@ -898,7 +898,7 @@ static struct regulator_init_data cam_i_core_reg_init_data
= {
static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
.supply_name = "CAM_I_CORE_1.2V",
.microvolts = 1200000,
- .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
+ .gpio = EXYNOS4210_GPE2(2), /* CAM_8M_CORE_EN */
.enable_high = 1,
.init_data =&cam_i_core_reg_init_data,
};
@@ -920,7 +920,7 @@ static struct regulator_init_data cam_s_if_reg_init_data = {
static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
.supply_name = "CAM_S_IF_1.8V",
.microvolts = 1800000,
- .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
+ .gpio = EXYNOS4210_GPE3(0), /* CAM_PWR_EN1 */
.enable_high = 1,
.init_data =&cam_s_if_reg_init_data,
};
@@ -938,11 +938,11 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata =
{
.phy_enable = s5p_csis_phy_enable,
};
-#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_LEVEL_EN(n) EXYNOS4210_GPE4(n + 3)
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
-#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
-#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
-#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
+#define GPIO_CAM_MEGA_nRST EXYNOS4210_GPE2(5)
+#define GPIO_CAM_VGA_NRST EXYNOS4210_GPE4(7)
+#define GPIO_CAM_VGA_NSTBY EXYNOS4210_GPE4(6)
static int s5k6aa_set_power(int on)
{
diff --git a/arch/arm/mach-exynos/setup-fimc.c
b/arch/arm/mach-exynos/setup-fimc.c
index 6a45078..d74843e 100644
--- a/arch/arm/mach-exynos/setup-fimc.c
+++ b/arch/arm/mach-exynos/setup-fimc.c
@@ -26,8 +26,8 @@ int exynos4_fimc_setup_gpio(enum s5p_camport_id id)
break;
case S5P_CAMPORT_B:
- gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */
- gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */
+ gpio8 = EXYNOS4210_GPE0(0); /* DATA[0:7] */
+ gpio5 = EXYNOS4210_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD
*/
sfn = S3C_GPIO_SFN(3);
break;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index f88bb9f..eda34e6 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2171,32 +2171,32 @@ static struct samsung_gpio_chip exynos4_gpios_1[] = {
},
}, {
.chip = {
- .base = EXYNOS4_GPE0(0),
- .ngpio = EXYNOS4_GPIO_E0_NR,
+ .base = EXYNOS4210_GPE0(0),
+ .ngpio = EXYNOS4210_GPIO_E0_NR,
.label = "GPE0",
},
}, {
.chip = {
- .base = EXYNOS4_GPE1(0),
- .ngpio = EXYNOS4_GPIO_E1_NR,
+ .base = EXYNOS4210_GPE1(0),
+ .ngpio = EXYNOS4210_GPIO_E1_NR,
.label = "GPE1",
},
}, {
.chip = {
- .base = EXYNOS4_GPE2(0),
- .ngpio = EXYNOS4_GPIO_E2_NR,
+ .base = EXYNOS4210_GPE2(0),
+ .ngpio = EXYNOS4210_GPIO_E2_NR,
.label = "GPE2",
},
}, {
.chip = {
- .base = EXYNOS4_GPE3(0),
- .ngpio = EXYNOS4_GPIO_E3_NR,
+ .base = EXYNOS4210_GPE3(0),
+ .ngpio = EXYNOS4210_GPIO_E3_NR,
.label = "GPE3",
},
}, {
.chip = {
- .base = EXYNOS4_GPE4(0),
- .ngpio = EXYNOS4_GPIO_E4_NR,
+ .base = EXYNOS4210_GPE4(0),
+ .ngpio = EXYNOS4210_GPIO_E4_NR,
.label = "GPE4",
},
}, {
