Setting SW_RST does TX/RX FIFO flush. After FIFO flush, SW_RST should be cleared. The above setting and clearing SW_RST operation should be done after spi channel off.
Signed-off-by: Kyoungil Kim <[email protected]> --- drivers/spi/spi-s3c64xx.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 972a94c..293f097 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -191,6 +191,10 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) writel(0, regs + S3C64XX_SPI_PACKET_CNT); val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); + writel(val, regs + S3C64XX_SPI_CH_CFG); + + val = readl(regs + S3C64XX_SPI_CH_CFG); val |= S3C64XX_SPI_CH_SW_RST; val &= ~S3C64XX_SPI_CH_HS_EN; writel(val, regs + S3C64XX_SPI_CH_CFG); @@ -224,10 +228,6 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) val = readl(regs + S3C64XX_SPI_MODE_CFG); val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); writel(val, regs + S3C64XX_SPI_MODE_CFG); - - val = readl(regs + S3C64XX_SPI_CH_CFG); - val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); - writel(val, regs + S3C64XX_SPI_CH_CFG); } static void s3c64xx_spi_dmacb(void *data) -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
