On 24 May 2012 12:57, Kukjin Kim <kgene....@samsung.com> wrote:
> Thomas Abraham wrote:
>>
>> The sclk_spi clock is derived currently from the first level divider
>> (MMCx_RATIO) which is incorrect. The output of the first level clock
>> is divided by a second level divider (MMCx_PRE_RATIO), the output of
>> which is used as the spi bus clock (sclk_spi). Fix the clock hierarchy
>> issues for the sclk_spi clock.
>>
>> Signed-off-by: Thomas Abraham <thomas.abra...@linaro.org>
>> Acked-by: Jaswinder Singh <jaswinder.si...@linaro.org>
>> ---
>> arch/arm/mach-exynos/clock-exynos4.c | 48
> ++++++++++++++++++++++++++++--
>> ---
>> 1 files changed, 40 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-
>> exynos/clock-exynos4.c
>> index 10a46a9..b5f0507 100644
>> --- a/arch/arm/mach-exynos/clock-exynos4.c
>> +++ b/arch/arm/mach-exynos/clock-exynos4.c
>> @@ -1242,40 +1242,70 @@ static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
>> .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
>> };
>>
>> +static struct clksrc_clk exynos4_clk_mdout_spi0 = {
>
> In this case, it's expected that 'exynos4_clk_dout_spi0' will be used even
> though this indicates the clock of mux_out and divider_out together.
>
>> + .clk = {
>> + .name = "sclk_spi_mdout",
>
> So, this should be 'dout_spi0'
This clock instance has both a mux and a divider. So I used mdout to
mean that there is both a mux and a divider in this clock instance. If
you insist on changing the name to dout_spi0, I will change it.
Thanks,
Thomas.
>
>> + .devname = "exynos4210-spi.0",
>
> [...]
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
