Adds clock setting entries for Exynos4212 and Exynos4412 platforms.
Signed-off-by: Sachin Kamat <[email protected]>
---
arch/arm/mach-exynos/include/mach/regs-usb-phy.h | 20 ++++++--
arch/arm/mach-exynos/setup-usb-phy.c | 55 ++++++++++++++++-----
arch/arm/plat-samsung/include/plat/cpu.h | 4 ++
3 files changed, 61 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
index c337cf3..0727773 100644
--- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
+++ b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
@@ -35,11 +35,21 @@
#define PHY1_COMMON_ON_N (1 << 7)
#define PHY0_COMMON_ON_N (1 << 4)
#define PHY0_ID_PULLUP (1 << 2)
-#define CLKSEL_MASK (0x3 << 0)
-#define CLKSEL_SHIFT (0)
-#define CLKSEL_48M (0x0 << 0)
-#define CLKSEL_12M (0x2 << 0)
-#define CLKSEL_24M (0x3 << 0)
+
+#define EXYNOS4_CLKSEL_SHIFT (0)
+
+#define EXYNOS4210_CLKSEL_MASK (0x3 << 0)
+#define EXYNOS4210_CLKSEL_48M (0x0 << 0)
+#define EXYNOS4210_CLKSEL_12M (0x2 << 0)
+#define EXYNOS4210_CLKSEL_24M (0x3 << 0)
+
+#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0)
+#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0)
+#define EXYNOS4X12_CLKSEL_10M (0x1 << 0)
+#define EXYNOS4X12_CLKSEL_12M (0x2 << 0)
+#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0)
+#define EXYNOS4X12_CLKSEL_20M (0x4 << 0)
+#define EXYNOS4X12_CLKSEL_24M (0x5 << 0)
#define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08)
#define HOST_LINK_PORT_SWRST_MASK (0xf << 6)
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c
b/arch/arm/mach-exynos/setup-usb-phy.c
index 1af0a7f..8f90ce0 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -31,22 +31,51 @@ static void exynos4210_usb_phy_clkset(struct
platform_device *pdev)
struct clk *xusbxti_clk;
u32 phyclk;
- /* set clock frequency for PLL */
- phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
- switch (clk_get_rate(xusbxti_clk)) {
- case 12 * MHZ:
- phyclk |= CLKSEL_12M;
- break;
- case 24 * MHZ:
- phyclk |= CLKSEL_24M;
- break;
- default:
- case 48 * MHZ:
- /* default reference clock */
- break;
+ if (soc_is_exynos4210()) {
+ /* set clock frequency for PLL */
+ phyclk = readl(EXYNOS4_PHYCLK) &
~EXYNOS4210_CLKSEL_MASK;
+
+ switch (clk_get_rate(xusbxti_clk)) {
+ case 12 * MHZ:
+ phyclk |= EXYNOS4210_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ phyclk |= EXYNOS4210_CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ break;
+ }
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ /* set clock frequency for PLL */
+ phyclk = readl(EXYNOS4_PHYCLK) &
~EXYNOS4X12_CLKSEL_MASK;
+
+ switch (clk_get_rate(xusbxti_clk)) {
+ case 9600 * KHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_12M;
+ break;
+ case 19200 * KHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ phyclk |= EXYNOS4X12_CLKSEL_20M;
+ break;
+ default:
+ case 24 * MHZ:
+ /* default reference clock */
+ phyclk |= EXYNOS4X12_CLKSEL_24M;
+ break;
+ }
}
clk_put(xusbxti_clk);
}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h
b/arch/arm/plat-samsung/include/plat/cpu.h
index 787ceac..6a6ff7e 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -132,6 +132,10 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID,
EXYNOS5_SOC_MASK)
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x,
__phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
#ifndef MHZ
#define MHZ (1000*1000)
#endif
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
