Kyoungil Kim wrote:
>
> Kyoungil Kim wrote:
>
> I missed following.
>
> Russell King suggested:
>
> As I said, drivers have no business interpreting anything but IS_ERR(clk)
> as being an error. They should not make any other
> assumptions.
>
> Suggested-by: Russell King <rmk+ker...@arm.linux.org.uk>
>
> > Signed-off-by: Kyoungil Kim <ki0351....@samsung.com>
> > ---
> > drivers/tty/serial/samsung.c | 21 ++++++++++++---------
> > 1 files changed, 12 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
> > index d8b0aee..5668538 100644
> > --- a/drivers/tty/serial/samsung.c
> > +++ b/drivers/tty/serial/samsung.c
> > @@ -529,7 +529,7 @@ static void s3c24xx_serial_pm(struct uart_port
*port,
> unsigned int level,
> >
> > switch (level) {
> > case 3:
> > - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
> > + if (!IS_ERR(ourport->baudclk))
> > clk_disable(ourport->baudclk);
> >
> > clk_disable(ourport->clk);
> > @@ -538,7 +538,7 @@ static void s3c24xx_serial_pm(struct uart_port
*port,
> unsigned int level,
> > case 0:
> > clk_enable(ourport->clk);
> >
> > - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
> > + if (!IS_ERR(ourport->baudclk))
> > clk_enable(ourport->baudclk);
> >
> > break;
> > @@ -604,7 +604,6 @@ static unsigned int s3c24xx_serial_getclk(struct
> s3c24xx_uart_port *ourport,
> > char clkname[MAX_CLK_NAME_LENGTH];
> > int calc_deviation, deviation = (1 << 30) - 1;
> >
> > - *best_clk = NULL;
> > clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
> > ourport->info->def_clk_sel;
> > for (cnt = 0; cnt < info->num_clks; cnt++) {
> > @@ -613,7 +612,7 @@ static unsigned int s3c24xx_serial_getclk(struct
> s3c24xx_uart_port *ourport,
> >
> > sprintf(clkname, "clk_uart_baud%d", cnt);
> > clk = clk_get(ourport->port.dev, clkname);
> > - if (IS_ERR_OR_NULL(clk))
> > + if (IS_ERR(clk))
> > continue;
> >
> > rate = clk_get_rate(clk);
> > @@ -684,7 +683,7 @@ static void s3c24xx_serial_set_termios(struct
> uart_port *port,
> > {
> > struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
> > struct s3c24xx_uart_port *ourport = to_ourport(port);
> > - struct clk *clk = NULL;
> > + struct clk *clk = ERR_PTR(-EINVAL);
> > unsigned long flags;
> > unsigned int baud, quot, clk_sel = 0;
> > unsigned int ulcon;
> > @@ -705,7 +704,7 @@ static void s3c24xx_serial_set_termios(struct
> uart_port *port,
> > quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
> > if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
> > quot = port->custom_divisor;
> > - if (!clk)
> > + if (IS_ERR(clk))
> > return;
> >
> > /* check to see if we need to change clock source */
> > @@ -713,9 +712,9 @@ static void s3c24xx_serial_set_termios(struct
> uart_port *port,
> > if (ourport->baudclk != clk) {
> > s3c24xx_serial_setsource(port, clk_sel);
> >
> > - if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
> > + if (!IS_ERR(ourport->baudclk)) {
> > clk_disable(ourport->baudclk);
> > - ourport->baudclk = NULL;
> > + ourport->baudclk = ERR_PTR(-EINVAL);
> > }
> >
> > clk_enable(clk);
> > @@ -1160,6 +1159,9 @@ static ssize_t s3c24xx_serial_show_clksrc(struct
> device *dev,
> > struct uart_port *port = s3c24xx_dev_to_port(dev);
> > struct s3c24xx_uart_port *ourport = to_ourport(port);
> >
> > + if (IS_ERR(ourport->baudclk))
> > + return -EINVAL;
> > +
> > return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
> > }
> >
> > @@ -1200,6 +1202,7 @@ static int s3c24xx_serial_probe(struct
> platform_device *pdev)
> > return -ENODEV;
> > }
> >
> > + ourport->baudclk = ERR_PTR(-EINVAL);
> > ourport->info = ourport->drv_data->info;
> > ourport->cfg = (pdev->dev.platform_data) ?
> > (struct s3c2410_uartcfg *)pdev->dev.platform_data :
> > @@ -1387,7 +1390,7 @@ s3c24xx_serial_get_options(struct uart_port *port,
> int *baud,
> > sprintf(clk_name, "clk_uart_baud%d", clk_sel);
> >
> > clk = clk_get(port->dev, clk_name);
> > - if (!IS_ERR(clk) && clk != NULL)
> > + if (!IS_ERR(clk))
> > rate = clk_get_rate(clk);
> > else
> > rate = 1;
> > --
> > 1.7.1
Looks ok to me, will apply.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
