Sachin Kamat wrote: > > Adds clock setting entries for Exynos4212 and Exynos4412 platforms. > > Signed-off-by: Sachin Kamat <[email protected]> > --- > Based on v3.5-for-usb-2 branch of Kukjin's tree > --- > arch/arm/mach-exynos/include/mach/regs-usb-phy.h | 20 ++++++-- > arch/arm/mach-exynos/setup-usb-phy.c | 55 ++++++++++++++++----- > arch/arm/plat-samsung/include/plat/cpu.h | 4 ++ > 3 files changed, 61 insertions(+), 18 deletions(-) > > diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h > b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h > index c337cf3..0727773 100644 > --- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h > +++ b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h > @@ -35,11 +35,21 @@ > #define PHY1_COMMON_ON_N (1 << 7) > #define PHY0_COMMON_ON_N (1 << 4) > #define PHY0_ID_PULLUP (1 << 2) > -#define CLKSEL_MASK (0x3 << 0) > -#define CLKSEL_SHIFT (0) > -#define CLKSEL_48M (0x0 << 0) > -#define CLKSEL_12M (0x2 << 0) > -#define CLKSEL_24M (0x3 << 0) > + > +#define EXYNOS4_CLKSEL_SHIFT (0) > + > +#define EXYNOS4210_CLKSEL_MASK (0x3 << 0) > +#define EXYNOS4210_CLKSEL_48M (0x0 << 0) > +#define EXYNOS4210_CLKSEL_12M (0x2 << 0) > +#define EXYNOS4210_CLKSEL_24M (0x3 << 0) > + > +#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0) > +#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0) > +#define EXYNOS4X12_CLKSEL_10M (0x1 << 0) > +#define EXYNOS4X12_CLKSEL_12M (0x2 << 0) > +#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0) > +#define EXYNOS4X12_CLKSEL_20M (0x4 << 0) > +#define EXYNOS4X12_CLKSEL_24M (0x5 << 0) > > #define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08) > #define HOST_LINK_PORT_SWRST_MASK (0xf << 6) > diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach- > exynos/setup-usb-phy.c > index 1af0a7f..d26deb7 100644 > --- a/arch/arm/mach-exynos/setup-usb-phy.c > +++ b/arch/arm/mach-exynos/setup-usb-phy.c > @@ -31,22 +31,51 @@ static void exynos4210_usb_phy_clkset(struct > platform_device *pdev) > struct clk *xusbxti_clk; > u32 phyclk; > > - /* set clock frequency for PLL */ > - phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK; > > xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); > if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { > - switch (clk_get_rate(xusbxti_clk)) { > - case 12 * MHZ: > - phyclk |= CLKSEL_12M; > - break; > - case 24 * MHZ: > - phyclk |= CLKSEL_24M; > - break; > - default: > - case 48 * MHZ: > - /* default reference clock */ > - break; > + if (soc_is_exynos4210()) { > + /* set clock frequency for PLL */ > + phyclk = readl(EXYNOS4_PHYCLK) & > ~EXYNOS4210_CLKSEL_MASK; > + > + switch (clk_get_rate(xusbxti_clk)) { > + case 12 * MHZ: > + phyclk |= EXYNOS4210_CLKSEL_12M; > + break; > + default: > + case 24 * MHZ: > + phyclk |= EXYNOS4210_CLKSEL_24M; > + break; > + case 48 * MHZ: > + phyclk |= EXYNOS4210_CLKSEL_48M; > + break; > + } > + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { > + /* set clock frequency for PLL */ > + phyclk = readl(EXYNOS4_PHYCLK) & > ~EXYNOS4X12_CLKSEL_MASK; > + > + switch (clk_get_rate(xusbxti_clk)) { > + case 9600 * KHZ: > + phyclk |= EXYNOS4X12_CLKSEL_9600K; > + break; > + case 10 * MHZ: > + phyclk |= EXYNOS4X12_CLKSEL_10M; > + break; > + case 12 * MHZ: > + phyclk |= EXYNOS4X12_CLKSEL_12M; > + break; > + case 19200 * KHZ: > + phyclk |= EXYNOS4X12_CLKSEL_19200K; > + break; > + case 20 * MHZ: > + phyclk |= EXYNOS4X12_CLKSEL_20M; > + break; > + default: > + case 24 * MHZ: > + /* default reference clock */ > + phyclk |= EXYNOS4X12_CLKSEL_24M; > + break; > + } > } > clk_put(xusbxti_clk); > } > diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat- > samsung/include/plat/cpu.h > index 787ceac..6a6ff7e 100644 > --- a/arch/arm/plat-samsung/include/plat/cpu.h > +++ b/arch/arm/plat-samsung/include/plat/cpu.h > @@ -132,6 +132,10 @@ IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, > EXYNOS5_SOC_MASK) > > #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, > __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } > > +#ifndef KHZ > +#define KHZ (1000) > +#endif > + > #ifndef MHZ > #define MHZ (1000*1000) > #endif > -- > 1.7.4.1
OK, applied. Thanks. Best regards, Kgene. -- Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
