On 09/30/2012 11:29 PM, Leela Krishna Amudala wrote: > Hello Stephen Warren, > > The binding names that I use in my dts file should match with the > names given in > http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html > right?
I don't think so; the binding in that link is for example: > + - xres, yres: Display resolution > + - left-margin, right-margin, hsync-len: Horizontal Display timing parameters > + in pixels > + upper-margin, lower-margin, vsync-len: Vertical display timing parameters > in > + lines > + - clock: displayclock in Hz i.e. a bunch of separate properties, one for each value needed to describe the display timing. However, your patch contains: >>> + - samsung,fimd-display: This property should specify the phandle of the >>> + display device node which holds the video interface timing with the >>> + below mentioned properties. >>> + >>> + - lcd-htiming: Specifies the horizontal timing for the overlay. The >>> + horizontal timing includes four parameters in the following order. >>> + >>> + - horizontal back porch (in number of lcd clocks) >>> + - horizontal front porch (in number of lcd clocks) >>> + - hsync pulse width (in number of lcd clocks) >>> + - Display panels X resolution. A single lcd-htiming property, which contains 4 values. (and a similar construct for the vertical timing). That seems entirely different to me... -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html