Hi,

Am Freitag, 14. September 2012, 11:08:51 schrieb Chander Kashyap:
> Perform clock disable/enable in runtime suspend/resume.
> 
> Signed-off-by: Chander Kashyap <chander.kash...@linaro.org>

It seems this patch breaks my S3C2416 based machine with 3.7-rc1. I'm not 
yet sure why, but the only response I get is loop of:

        mmc0: Timeout waiting for hardware interrupt.
        mmc0: Internal clock never stabilised.
        mmc0: Timeout waiting for hardware interrupt.
        mmc0: Internal clock never stabilised.


This only happens on the hsmmc channel using the gpio-based card detect and 
even prevents the card from beeing fully detected. The other hsmmc channel 
using a permanent emmc seems to be working fine.

And of course, when I revert this patch everything works fine again.

I'll investigate further, but it'd be also ok if someone has a fix for this 
before me :-) .


Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to