On 10/29/12 22:14, Thomas Abraham wrote:
All supported Exynos5 platforms are device tree enabled and hence the
unused static uart resource information is removed.
Signed-off-by: Thomas Abraham<[email protected]>
---
arch/arm/mach-exynos/common.c | 6 +-----
arch/arm/mach-exynos/dev-uart.c | 24 ------------------------
arch/arm/mach-exynos/include/mach/irqs.h | 5 -----
arch/arm/mach-exynos/include/mach/map.h | 1 -
4 files changed, 1 insertions(+), 35 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 1947be8..5a305f0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -96,7 +96,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
.init_clocks = exynos5_init_clocks,
- .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos5250,
},
@@ -735,10 +734,7 @@ static void __init exynos_init_uarts(struct
s3c2410_uartcfg *cfg, int no)
for (ucnt = 0; ucnt< no; ucnt++, tcfg++)
tcfg->has_fracval = 1;
- if (soc_is_exynos5250())
- s3c24xx_init_uartdevs("exynos4210-uart",
exynos5_uart_resources, cfg, no);
- else
- s3c24xx_init_uartdevs("exynos4210-uart",
exynos4_uart_resources, cfg, no);
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg,
no);
}
static void __iomem *exynos_eint_base;
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
index 2e85c02..7c42f4b 100644
--- a/arch/arm/mach-exynos/dev-uart.c
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -52,27 +52,3 @@ struct s3c24xx_uart_resources exynos4_uart_resources[]
__initdata = {
.nr_resources = ARRAY_SIZE(exynos4_uart3_resource),
},
};
-
-EXYNOS_UART_RESOURCE(5, 0)
-EXYNOS_UART_RESOURCE(5, 1)
-EXYNOS_UART_RESOURCE(5, 2)
-EXYNOS_UART_RESOURCE(5, 3)
-
-struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
- [0] = {
- .resources = exynos5_uart0_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
- },
- [1] = {
- .resources = exynos5_uart1_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
- },
- [2] = {
- .resources = exynos5_uart2_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart2_resource),
- },
- [3] = {
- .resources = exynos5_uart3_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart3_resource),
- },
-};
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h
b/arch/arm/mach-exynos/include/mach/irqs.h
index 35bced6..6da3115 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -259,11 +259,6 @@
#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48)
#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49)
#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50)
-#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
-#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
-#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
-#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
-#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
#define EXYNOS5_IRQ_IIC IRQ_SPI(56)
#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57)
#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58)
diff --git a/arch/arm/mach-exynos/include/mach/map.h
b/arch/arm/mach-exynos/include/mach/map.h
index 8480849..e737331 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -279,7 +279,6 @@
#define EXYNOS5_PA_UART1 0x12C10000
#define EXYNOS5_PA_UART2 0x12C20000
#define EXYNOS5_PA_UART3 0x12C30000
-#define EXYNOS5_SZ_UART SZ_256
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) *
S3C_UART_OFFSET))
Yes, right. And I think, the function name, exynos_init_uarts() can be
changed to exynos4_init_uarts() clearly with this...so I did when I
applied this.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
