Kukjin Kim wrote: > > Heiko Stübner wrote: > > > > The register definitions are only used in the driver itself. > > This also removes the last dependency on plat/ includes from the i2c > > driver. > > > > Signed-off-by: Heiko Stuebner <[email protected]> > > --- > > arch/arm/mach-s3c24xx/mach-rx1950.c | 1 - > > arch/arm/plat-samsung/devs.c | 1 - > > arch/arm/plat-samsung/include/plat/regs-iic.h | 56 > > ------------------------- > > drivers/i2c/busses/i2c-s3c2410.c | 41 ++++++++++++++++++- > > 4 files changed, 40 insertions(+), 59 deletions(-) delete mode > > 100644 arch/arm/plat-samsung/include/plat/regs-iic.h > > > > diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach- > > s3c24xx/mach-rx1950.c index 799af43..64b52a9 100644 > > --- a/arch/arm/mach-s3c24xx/mach-rx1950.c > > +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c > > @@ -56,7 +56,6 @@ > > #include <plat/cpu.h> > > #include <plat/devs.h> > > #include <plat/pm.h> > > -#include <plat/regs-iic.h> > > #include <plat/regs-serial.h> > > #include <plat/samsung-time.h> > > > > diff --git a/arch/arm/plat-samsung/devs.c > > b/arch/arm/plat-samsung/devs.c index e1124d9..6317a9e 100644 > > --- a/arch/arm/plat-samsung/devs.c > > +++ b/arch/arm/plat-samsung/devs.c > > @@ -62,7 +62,6 @@ > > #include <linux/platform_data/usb-s3c2410_udc.h> > > #include <linux/platform_data/usb-ohci-s3c2410.h> > > #include <plat/usb-phy.h> > > -#include <plat/regs-iic.h> > > #include <plat/regs-serial.h> > > #include <plat/regs-spi.h> > > #include <linux/platform_data/spi-s3c64xx.h> > > diff --git a/arch/arm/plat-samsung/include/plat/regs-iic.h > > b/arch/arm/plat- samsung/include/plat/regs-iic.h deleted file mode > > 100644 index 2f7c17d..0000000 > > --- a/arch/arm/plat-samsung/include/plat/regs-iic.h > > +++ /dev/null > > @@ -1,56 +0,0 @@ > > -/* arch/arm/mach-s3c2410/include/mach/regs-iic.h > > - * > > - * Copyright (c) 2004 Simtec Electronics <[email protected]> > > - * http://www.simtec.co.uk/products/SWLINUX/ > > - * > > - * This program is free software; you can redistribute it and/or > > modify > > - * it under the terms of the GNU General Public License version 2 as > > - * published by the Free Software Foundation. > > - * > > - * S3C2410 I2C Controller > > -*/ > > - > > -#ifndef __ASM_ARCH_REGS_IIC_H > > -#define __ASM_ARCH_REGS_IIC_H __FILE__ > > - > > -/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ > > - > > -#define S3C2410_IICREG(x) (x) > > - > > -#define S3C2410_IICCON S3C2410_IICREG(0x00) > > -#define S3C2410_IICSTAT S3C2410_IICREG(0x04) > > -#define S3C2410_IICADD S3C2410_IICREG(0x08) > > -#define S3C2410_IICDS S3C2410_IICREG(0x0C) > > -#define S3C2440_IICLC S3C2410_IICREG(0x10) > > - > > -#define S3C2410_IICCON_ACKEN (1<<7) > > -#define S3C2410_IICCON_TXDIV_16 (0<<6) > > -#define S3C2410_IICCON_TXDIV_512 (1<<6) > > -#define S3C2410_IICCON_IRQEN (1<<5) > > -#define S3C2410_IICCON_IRQPEND (1<<4) > > -#define S3C2410_IICCON_SCALE(x) ((x)&15) > > -#define S3C2410_IICCON_SCALEMASK (0xf) > > - > > -#define S3C2410_IICSTAT_MASTER_RX (2<<6) > > -#define S3C2410_IICSTAT_MASTER_TX (3<<6) > > -#define S3C2410_IICSTAT_SLAVE_RX (0<<6) > > -#define S3C2410_IICSTAT_SLAVE_TX (1<<6) > > -#define S3C2410_IICSTAT_MODEMASK (3<<6) > > - > > -#define S3C2410_IICSTAT_START (1<<5) > > -#define S3C2410_IICSTAT_BUSBUSY (1<<5) > > -#define S3C2410_IICSTAT_TXRXEN (1<<4) > > -#define S3C2410_IICSTAT_ARBITR (1<<3) > > -#define S3C2410_IICSTAT_ASSLAVE (1<<2) > > -#define S3C2410_IICSTAT_ADDR0 (1<<1) > > -#define S3C2410_IICSTAT_LASTBIT (1<<0) > > - > > -#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) > > -#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) > > -#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) > > -#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) > > -#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) > > - > > -#define S3C2410_IICLC_FILTER_ON (1<<2) > > - > > -#endif /* __ASM_ARCH_REGS_IIC_H */ > > diff --git a/drivers/i2c/busses/i2c-s3c2410.c > > b/drivers/i2c/busses/i2c- s3c2410.c index a290d08..5cc4f71 100644 > > --- a/drivers/i2c/busses/i2c-s3c2410.c > > +++ b/drivers/i2c/busses/i2c-s3c2410.c > > @@ -42,9 +42,48 @@ > > > > #include <asm/irq.h> > > > > -#include <plat/regs-iic.h> > > #include <linux/platform_data/i2c-s3c2410.h> > > > > +/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ > > + > > +#define S3C2410_IICREG(x) (x) > > + > > +#define S3C2410_IICCON S3C2410_IICREG(0x00) > > +#define S3C2410_IICSTAT S3C2410_IICREG(0x04) > > +#define S3C2410_IICADD S3C2410_IICREG(0x08) > > +#define S3C2410_IICDS S3C2410_IICREG(0x0C) > > +#define S3C2440_IICLC S3C2410_IICREG(0x10) > > + > > +#define S3C2410_IICCON_ACKEN (1<<7) > > +#define S3C2410_IICCON_TXDIV_16 (0<<6) > > +#define S3C2410_IICCON_TXDIV_512 (1<<6) > > +#define S3C2410_IICCON_IRQEN (1<<5) > > +#define S3C2410_IICCON_IRQPEND (1<<4) > > +#define S3C2410_IICCON_SCALE(x) ((x)&15) > > +#define S3C2410_IICCON_SCALEMASK (0xf) > > + > > +#define S3C2410_IICSTAT_MASTER_RX (2<<6) > > +#define S3C2410_IICSTAT_MASTER_TX (3<<6) > > +#define S3C2410_IICSTAT_SLAVE_RX (0<<6) > > +#define S3C2410_IICSTAT_SLAVE_TX (1<<6) > > +#define S3C2410_IICSTAT_MODEMASK (3<<6) > > + > > +#define S3C2410_IICSTAT_START (1<<5) > > +#define S3C2410_IICSTAT_BUSBUSY (1<<5) > > +#define S3C2410_IICSTAT_TXRXEN (1<<4) > > +#define S3C2410_IICSTAT_ARBITR (1<<3) > > +#define S3C2410_IICSTAT_ASSLAVE (1<<2) > > +#define S3C2410_IICSTAT_ADDR0 (1<<1) > > +#define S3C2410_IICSTAT_LASTBIT (1<<0) > > + > > +#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) > > +#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) > > +#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) > > +#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) > > +#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) > > + > > +#define S3C2410_IICLC_FILTER_ON (1<<2) > > + > > /* Treat S3C2410 as baseline hardware, anything else is supported via > > quirks */ > > #define QUIRK_S3C2440 (1 << 0) > > #define QUIRK_HDMIPHY (1 << 1) > > -- > > 1.7.2.3 > > Looks good to me on this series: > Acked-by: Kukjin Kim <[email protected]> > > Hi Wolfram, if you're ok on this, please pick up into your tree with my ack. >
Re-sending due to changing of Wolfram's e-mail address. Thanks. - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
