On Wed, Jan 23, 2013 at 04:58:06AM -0000, Naveen Krishna Chatradhi wrote:
> This patch add an ADC IP found on EXYNOS5 series socs from Samsung.
> Also adds the Documentation for device tree bindings.
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com>
>
> ---
> Changes since v1:
>
> 1. Fixed comments from Lars
> 2. Added support for ADC on EXYNOS5410
>
> Changes since v2:
>
> 1. Changed the instance name for (struct iio_dev *) to indio_dev
> 2. Changed devm_request_irq to request_irq
>
> Few doubts regarding the mappings and child device handling.
> Kindly, suggest me better methods.
>
> .../bindings/arm/samsung/exynos5-adc.txt | 37 ++
> drivers/iio/adc/Kconfig | 7 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/exynos5_adc.c | 464
> ++++++++++++++++++++
> 4 files changed, 509 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
> create mode 100644 drivers/iio/adc/exynos5_adc.c
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
> b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
> new file mode 100644
> index 0000000..9a5b515
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
> @@ -0,0 +1,37 @@
> +Samsung Exynos5 Analog to Digital Converter bindings
> +
> +Required properties:
> +- compatible: Must be "samsung,exynos5250-adc" for exynos5250
> controllers.
> +- reg: Contains ADC register address range (base
> address and
> + length).
> +- interrupts: Contains the interrupt information for the
> timer. The
> + format is being dependent on which interrupt controller
> + the Samsung device uses.
> +
> +Note: child nodes can be added for auto probing from device tree.
> +
> +Example: adding device info in dtsi file
> +
> +adc@12D10000 {
> + compatible = "samsung,exynos5250-adc";
> + reg = <0x12D10000 0x100>;
> + interrupts = <0 106 0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +};
> +
> +
> +Example: Adding child nodes in dts file
> +
> +adc@12D10000 {
> +
> + /* NTC thermistor is a hwmon device */
> + ncp15wb473@0 {
> + compatible = "ntc,ncp15wb473";
> + reg = <0x0>;
> + pullup-uV = <1800000>;
> + pullup-ohm = <47000>;
> + pulldown-ohm = <0>;
> + };
> +};
How about:
adc: adc@12D10000 {
compatible = "samsung,exynos5250-adc";
reg = <0x12D10000 0x100>;
interrupts = <0 106 0>;
#io-channel-cells = <1>;
};
...
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
reg = <0x0>; /* is this needed ? */
io-channels = <&adc 0>;
io-channel-names = "adc";
pullup-uV = <1800000>; /* uV or uv ? */
pullup-ohm = <47000>;
pulldown-ohm = <0>;
};
The ncp15wb473 driver would then use either iio_channel_get_all() to get the iio
channel list or, if it only supports one adc channel per instance,
iio_channel_get().
In that context, it would probably make sense to rework the ntc_thermistor
driver to support both DT as well as direct instantiation using access functions
and platform data (as it does today).
Also see https://patchwork.kernel.org/patch/2112171/.
Thanks,
Guenter
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index fe822a1..33ceabf 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -91,6 +91,13 @@ config AT91_ADC
> help
> Say yes here to build support for Atmel AT91 ADC.
>
> +config EXYNOS5_ADC
> + bool "Exynos5 ADC driver support"
> + help
> + Core support for the ADC block found in the Samsung EXYNOS5 series
> + of SoCs for drivers such as the touchscreen and hwmon to use to share
> + this resource.
> +
> config LP8788_ADC
> bool "LP8788 ADC driver"
> depends on MFD_LP8788
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 2d5f100..5b4a4f6 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o
> obj-$(CONFIG_AD7793) += ad7793.o
> obj-$(CONFIG_AD7887) += ad7887.o
> obj-$(CONFIG_AT91_ADC) += at91_adc.o
> +obj-$(CONFIG_EXYNOS5_ADC) += exynos5_adc.o
> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> obj-$(CONFIG_MAX1363) += max1363.o
> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
> diff --git a/drivers/iio/adc/exynos5_adc.c b/drivers/iio/adc/exynos5_adc.c
> new file mode 100644
> index 0000000..8982675
> --- /dev/null
> +++ b/drivers/iio/adc/exynos5_adc.c
> @@ -0,0 +1,464 @@
> +/*
> + * exynos5_adc.c - Support for ADC in EXYNOS5 SoCs
> + *
> + * 8 ~ 10 channel, 10/12-bit ADC
> + *
> + * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.nav...@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/of_platform.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/machine.h>
> +#include <linux/iio/driver.h>
> +
> +enum adc_version {
> + ADC_V1,
> + ADC_V2
> +};
> +
> +/* EXYNOS5250 ADC_V1 registers definitions */
> +#define ADC_V1_CON(x) ((x) + 0x00)
> +#define ADC_V1_DLY(x) ((x) + 0x08)
> +#define ADC_V1_DATX(x) ((x) + 0x0C)
> +#define ADC_V1_INTCLR(x) ((x) + 0x18)
> +#define ADC_V1_MUX(x) ((x) + 0x1c)
> +
> +/* EXYNOS5410 ADC_V2 registers definitions */
> +#define ADC_V2_CON1(x) ((x) + 0x00)
> +#define ADC_V2_CON2(x) ((x) + 0x04)
> +#define ADC_V2_STAT(x) ((x) + 0x08)
> +#define ADC_V2_INT_EN(x) ((x) + 0x10)
> +#define ADC_V2_INT_ST(x) ((x) + 0x14)
> +#define ADC_V2_VER(x) ((x) + 0x20)
> +
> +/* Bit definitions for ADC_V1 */
> +#define ADC_V1_CON_RES (1u << 16)
> +#define ADC_V1_CON_PRSCEN (1u << 14)
> +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6)
> +#define ADC_V1_CON_STANDBY (1u << 2)
> +
> +/* Bit definitions for ADC_V2 */
> +#define ADC_V2_CON1_SOFT_RESET (1u << 2)
> +
> +#define ADC_V2_CON2_OSEL (1u << 10)
> +#define ADC_V2_CON2_ESEL (1u << 9)
> +#define ADC_V2_CON2_HIGHF (1u << 8)
> +#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4)
> +#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0)
> +#define ADC_V2_CON2_ACH_MASK 0xF
> +
> +/* Bit definitions common for ADC_V1 and ADC_V2 */
> +#define ADC_V1_CON_EN_START (1u << 0)
> +#define ADC_V1_DATX_MASK 0xFFF
> +
> +struct exynos5_adc {
> + void __iomem *regs;
> + struct clk *clk;
> + unsigned int irq;
> + struct regulator *vdd;
> +
> + struct completion completion;
> +
> + struct iio_map *map;
> + u32 value;
> + unsigned int version;
> +};
> +
> +static const struct of_device_id exynos5_adc_match[] = {
> + { .compatible = "samsung,exynos5250-adc", .data = (void *)ADC_V1 },
> + { .compatible = "samsung,exynos5410-adc", .data = (void *)ADC_V2 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos5_adc_match);
> +
> +static inline unsigned int exynos5_adc_get_version(struct platform_device
> *pdev)
> +{
> + const struct of_device_id *match;
> +
> + match = of_match_node(exynos5_adc_match, pdev->dev.of_node);
> + return (unsigned int)match->data;
> +}
> +
> +/* default maps used by iio consumer (ex: ntc-thermistor driver) */
> +static struct iio_map exynos5_adc_iio_maps[] = {
> + {
> + .consumer_dev_name = "0.ncp15wb473",
> + .consumer_channel = "adc3",
> + .adc_channel_label = "adc3",
> + },
> + {
> + .consumer_dev_name = "1.ncp15wb473",
> + .consumer_channel = "adc4",
> + .adc_channel_label = "adc4",
> + },
> + {
> + .consumer_dev_name = "2.ncp15wb473",
> + .consumer_channel = "adc5",
> + .adc_channel_label = "adc5",
> + },
> + {
> + .consumer_dev_name = "3.ncp15wb473",
> + .consumer_channel = "adc6",
> + .adc_channel_label = "adc6",
> + },
> + {},
> +};
> +
> +static int exynos5_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val,
> + int *val2,
> + long mask)
> +{
> + struct exynos5_adc *info = iio_priv(indio_dev);
> + u32 con1, con2;
> +
> + if (mask == IIO_CHAN_INFO_RAW) {
> + mutex_lock(&indio_dev->mlock);
> +
> + /* Select the channel to be used and Trigger conversion */
> + if (info->version == ADC_V2) {
> + con2 = readl(ADC_V2_CON2(info->regs));
> + con2 &= ~ADC_V2_CON2_ACH_MASK;
> + con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
> + writel(con2, ADC_V2_CON2(info->regs));
> +
> + con1 = readl(ADC_V2_CON1(info->regs));
> + writel(con1 | ADC_V1_CON_EN_START,
> + ADC_V2_CON1(info->regs));
> + } else {
> + writel(chan->address, ADC_V1_MUX(info->regs));
> +
> + con1 = readl(ADC_V1_CON(info->regs));
> + writel(con1 | ADC_V1_CON_EN_START,
> + ADC_V1_CON(info->regs));
> + }
> +
> + wait_for_completion(&info->completion);
> + *val = info->value;
> +
> + mutex_unlock(&indio_dev->mlock);
> +
> + return IIO_VAL_INT;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static irqreturn_t exynos5_adc_isr(int irq, void *dev_id)
> +{
> + struct exynos5_adc *info = (struct exynos5_adc *)dev_id;
> +
> + /* Read value */
> + info->value = readl(ADC_V1_DATX(info->regs)) &
> + ADC_V1_DATX_MASK;
> + /* clear irq */
> + if (info->version == ADC_V2)
> + writel(1, ADC_V2_INT_ST(info->regs));
> + else
> + writel(1, ADC_V1_INTCLR(info->regs));
> +
> + complete(&info->completion);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int exynos5_adc_reg_access(struct iio_dev *indio_dev,
> + unsigned reg, unsigned writeval,
> + unsigned *readval)
> +{
> + struct exynos5_adc *info = iio_priv(indio_dev);
> + u32 ret;
> +
> + mutex_lock(&indio_dev->mlock);
> +
> + if (readval != NULL) {
> + ret = readl(info->regs + reg);
> + *readval = ret;
> + } else
> + ret = -EINVAL;
> +
> + mutex_unlock(&indio_dev->mlock);
> +
> + return ret;
> +}
> +
> +static const struct iio_info exynos5_adc_iio_info = {
> + .read_raw = &exynos5_read_raw,
> + .debugfs_reg_access = &exynos5_adc_reg_access,
> + .driver_module = THIS_MODULE,
> +};
> +
> +#define ADC_V1_CHANNEL(_index, _id) { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .channel = _index, \
> + .address = _index, \
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
> + .datasheet_name = _id, \
> +}
> +
> +/** ADC core in EXYNOS5410 has 10 channels,
> + * ADC core in EXYNOS5250 has 8 channels
> +*/
> +static const struct iio_chan_spec exynos5_adc_iio_channels[] = {
> + ADC_V1_CHANNEL(0, "adc0"),
> + ADC_V1_CHANNEL(1, "adc1"),
> + ADC_V1_CHANNEL(2, "adc2"),
> + ADC_V1_CHANNEL(3, "adc3"),
> + ADC_V1_CHANNEL(4, "adc4"),
> + ADC_V1_CHANNEL(5, "adc5"),
> + ADC_V1_CHANNEL(6, "adc6"),
> + ADC_V1_CHANNEL(7, "adc7"),
> + ADC_V1_CHANNEL(8, "adc8"),
> + ADC_V1_CHANNEL(9, "adc9"),
> +};
> +
> +static int exynos5_adc_remove_devices(struct device *dev, void *c)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> +
> + platform_device_unregister(pdev);
> +
> + return 0;
> +}
> +
> +static void exynos5_adc_hw_init(struct exynos5_adc *info)
> +{
> + u32 con1, con2;
> +
> + if (info->version == ADC_V2) {
> + con1 = ADC_V2_CON1_SOFT_RESET;
> + writel(con1, ADC_V2_CON1(info->regs));
> +
> + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
> + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
> + writel(con2, ADC_V2_CON2(info->regs));
> +
> + /* Enable interrupts */
> + writel(1, ADC_V2_INT_EN(info->regs));
> + } else {
> + /* set default prescaler values and Enable prescaler */
> + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
> +
> + /* Enable 12-bit ADC resolution */
> + con1 |= ADC_V1_CON_RES;
> + writel(con1, ADC_V1_CON(info->regs));
> + }
> +}
> +
> +static int exynos5_adc_probe(struct platform_device *pdev)
> +{
> + struct exynos5_adc *info = NULL;
> + struct device_node *np = pdev->dev.of_node;
> + struct iio_dev *indio_dev = NULL;
> + struct resource *mem;
> + int ret = -ENODEV;
> + int irq;
> +
> + if (!np)
> + return ret;
> +
> + indio_dev = iio_device_alloc(sizeof(struct exynos5_adc));
> + if (!indio_dev) {
> + dev_err(&pdev->dev, "failed allocating iio device\n");
> + return -ENOMEM;
> + }
> +
> + info = iio_priv(indio_dev);
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + info->regs = devm_request_and_ioremap(&pdev->dev, mem);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "no irq resource?\n");
> + ret = irq;
> + goto err_iio;
> + }
> +
> + info->irq = irq;
> +
> + ret = request_irq(info->irq, exynos5_adc_isr,
> + 0, dev_name(&pdev->dev), info);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
> + info->irq);
> + goto err_iio;
> + }
> +
> + info->clk = devm_clk_get(&pdev->dev, "adc");
> + if (IS_ERR(info->clk)) {
> + dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
> + PTR_ERR(info->clk));
> + ret = PTR_ERR(info->clk);
> + goto err_irq;
> + }
> +
> + info->vdd = devm_regulator_get(&pdev->dev, "vdd");
> + if (IS_ERR(info->vdd)) {
> + dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
> + PTR_ERR(info->vdd));
> + ret = PTR_ERR(info->vdd);
> + goto err_irq;
> + }
> +
> + info->version = exynos5_adc_get_version(pdev);
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + init_completion(&info->completion);
> +
> + indio_dev->name = dev_name(&pdev->dev);
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->dev.of_node = pdev->dev.of_node;
> + indio_dev->info = &exynos5_adc_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = exynos5_adc_iio_channels;
> + indio_dev->num_channels = ARRAY_SIZE(exynos5_adc_iio_channels);
> +
> + info->map = exynos5_adc_iio_maps;
> +
> + ret = iio_map_array_register(indio_dev, info->map);
> + if (ret) {
> + dev_err(&indio_dev->dev, "failed mapping iio, err: %d\n", ret);
> + goto err_irq;
> + }
> +
> + ret = iio_device_register(indio_dev);
> + if (ret)
> + goto err_map;
> +
> + ret = regulator_enable(info->vdd);
> + if (ret)
> + goto err_iio_dev;
> +
> + clk_prepare_enable(info->clk);
> +
> + exynos5_adc_hw_init(info);
> +
> + ret = of_platform_populate(np, exynos5_adc_match, NULL, &pdev->dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed adding child nodes\n");
> + goto err_of_populate;
> + }
> +
> + return 0;
> +
> +err_of_populate:
> + device_for_each_child(&pdev->dev, NULL, exynos5_adc_remove_devices);
> +err_iio_dev:
> + iio_device_unregister(indio_dev);
> +err_map:
> + iio_map_array_unregister(indio_dev, info->map);
> +err_irq:
> + free_irq(info->irq, info);
> +err_iio:
> + iio_device_free(indio_dev);
> + return ret;
> +}
> +
> +static int exynos5_adc_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> + struct exynos5_adc *info = iio_priv(indio_dev);
> +
> + iio_device_unregister(indio_dev);
> + iio_map_array_unregister(indio_dev, info->map);
> + free_irq(info->irq, info);
> + iio_device_free(indio_dev);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int exynos5_adc_suspend(struct device *dev)
> +{
> + struct exynos5_adc *info = dev_get_data(dev);
> + u32 con;
> +
> + if (info->version == ADC_V2) {
> + con = readl(ADC_V2_CON1(info->regs));
> + con &= ~ADC_V1_CON_EN_START;
> + writel(con, ADC_V2_CON1(info->regs));
> + } else {
> + con = readl(ADC_V1_CON(info->regs));
> + con |= ADC_V1_CON_STANDBY;
> + writel(con, ADC_V1_CON(info->regs));
> + }
> +
> + clk_unprepare_disable(info->clk);
> + regulator_disable(info->vdd);
> +
> + return 0;
> +}
> +
> +static int exynos5_adc_resume(struct device *dev)
> +{
> + struct exynos5_adc *info = dev_get_data(dev);
> + int ret;
> +
> + ret = regulator_enable(info->vdd);
> + if (ret)
> + return ret;
> +
> + clk_prepare_enable(info->clk);
> +
> + exynos5_adc_hw_init(info);
> +
> + return 0;
> +}
> +
> +#else
> +#define exynos5_adc_suspend NULL
> +#define exynos5_adc_resume NULL
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(exynos5_adc_pm_ops,
> + exynos5_adc_suspend,
> + exynos5_adc_resume);
> +
> +static struct platform_driver exynos5_adc_driver = {
> + .probe = exynos5_adc_probe,
> + .remove = exynos5_adc_remove,
> + .driver = {
> + .name = "exynos5-adc",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(exynos5_adc_match),
> + .pm = &exynos5_adc_pm_ops,
> + },
> +};
> +
> +module_platform_driver(exynos5_adc_driver);
> +
> +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.nav...@samsung.com>");
> +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
> +MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
