On 04/15/2013 04:14 PM, Tomasz Figa wrote:
> This patch adds basic device tree definitions for Samsung S3C64xx SoCs.
>
> Since all the SoCs in the series are very similar, the files are created
> hierarchically - one file for the whole series and then separate files
> for particular SoCs including the common one.
>
> Signed-off-by: Tomasz Figa <[email protected]>
> ---
> arch/arm/boot/dts/s3c6400.dtsi | 33 ++
> arch/arm/boot/dts/s3c6410.dtsi | 33 ++
> arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 683
> +++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/s3c64xx.dtsi | 136 +++++++
> 4 files changed, 885 insertions(+)
> create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
> create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
> create mode 100644 arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
>
[...]
> +
> + vic0: interrupt-controller@71200000 {
These nodes should be off a "simple-bus" node.
Rob
> + compatible = "arm,pl192-vic";
> + interrupt-controller;
> + reg = <0x71200000 0x1000>;
> + #interrupt-cells = <1>;
> + };
> +
> + vic1: interrupt-controller@71300000 {
> + compatible = "arm,pl192-vic";
> + interrupt-controller;
> + reg = <0x71300000 0x1000>;
> + #interrupt-cells = <1>;
> + };
> +
> + pinctrl0: pinctrl@7f008000 {
> + compatible = "samsung,s3c64xx-pinctrl";
> + reg = <0x7f008000 0x1000>;
> + interrupt-parent = <&vic1>;
> + interrupts = <21>;
> +
> + pctrl_int_map: pinctrl-interrupt-map {
> + interrupt-map = <0 &vic0 0>,
> + <1 &vic0 1>,
> + <2 &vic1 0>,
> + <3 &vic1 1>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + };
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,s3c64xx-wakeup-eint";
> + interrupts = <0>, <1>, <2>, <3>;
> + interrupt-parent = <&pctrl_int_map>;
> + };
> + };
> +
> + pwm: pwm@7f006000 {
> + compatible = "samsung,s3c6400-pwm";
> + reg = <0x7f006000 0x1000>;
> + interrupt-parent = <&vic0>;
> + interrupts = <23>, <24>, <25>, <27>, <28>;
> + samsung,pwm-outputs = <0>, <1>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + uart0: serial@7f005000 {
> + compatible = "samsung,s3c6400-uart";
> + reg = <0x7f005000 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <5>;
> + status = "disabled";
> + };
> +
> + uart1: serial@7f005400 {
> + compatible = "samsung,s3c6400-uart";
> + reg = <0x7f005400 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <6>;
> + status = "disabled";
> + };
> +
> + uart2: serial@7f005800 {
> + compatible = "samsung,s3c6400-uart";
> + reg = <0x7f005800 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <7>;
> + status = "disabled";
> + };
> +
> + uart3: serial@7f005c00 {
> + compatible = "samsung,s3c6400-uart";
> + reg = <0x7f005c00 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <8>;
> + status = "disabled";
> + };
> +
> + sdhci0: sdhci@7c200000 {
> + compatible = "samsung,s3c6410-sdhci";
> + reg = <0x7c200000 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <24>;
> + status = "disabled";
> + };
> +
> + sdhci1: sdhci@7c300000 {
> + compatible = "samsung,s3c6410-sdhci";
> + reg = <0x7c300000 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <25>;
> + status = "disabled";
> + };
> +
> + sdhci2: sdhci@7c400000 {
> + compatible = "samsung,s3c6410-sdhci";
> + reg = <0x7c400000 0x100>;
> + interrupt-parent = <&vic1>;
> + interrupts = <17>;
> + status = "disabled";
> + };
> +};
> +
> +/include/ "s3c64xx-pinctrl.dtsi"
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
