On 23-04-2013 02:23, Lukasz Majewski wrote:
Hi Eduardo,
On 19-04-2013 12:38, Lukasz Majewski wrote:
TMU probe function now checks for a device tree defined regulator.
For compatibility reasons it is allowed to probe driver even without
this regulator defined.
Signed-off-by: Lukasz Majewski <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
---
drivers/thermal/exynos_thermal.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/thermal/exynos_thermal.c
b/drivers/thermal/exynos_thermal.c index ba6094c..e922fa4 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -38,6 +38,7 @@
#include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
#include <linux/of.h>
+#include <linux/regulator/consumer.h>
#include <plat/cpu.h>
@@ -119,6 +120,8 @@
#define EXYNOS_ZONE_COUNT 3
+#define EXYNOS_TMU_REGULATOR "vdd_ts"
+
struct exynos_tmu_data {
struct exynos_tmu_platform_data *pdata;
struct resource *mem;
@@ -944,6 +947,7 @@ static int exynos_tmu_probe(struct
platform_device *pdev) {
struct exynos_tmu_data *data;
struct exynos_tmu_platform_data *pdata =
pdev->dev.platform_data;
+ struct regulator *reg;
int ret, i;
if (!pdata)
@@ -953,6 +957,21 @@ static int exynos_tmu_probe(struct
platform_device *pdev) dev_err(&pdev->dev, "No platform init data
supplied.\n"); return -ENODEV;
}
+
+ reg = regulator_get(&pdev->dev, EXYNOS_TMU_REGULATOR);
+ if (!IS_ERR(reg)) {
+ ret = regulator_enable(reg);
+ if (ret) {
+ dev_err(&pdev->dev, "Regulator %s not
enabled.\n",
+ EXYNOS_TMU_REGULATOR);
+ return ret;
+ }
+ } else {
+ dev_info(&pdev->dev,
+ "Regulator %s not defined at device
tree.\n",
+ EXYNOS_TMU_REGULATOR);
Maybe a dev_warn would fit better?
This is a bit tricky. I first wanted to return -ENODEV when regulator
is not available. Then I understood, that some other SoCs (e.g.
Exynos5) will not work.
The info here shall give a clear warn signal, that providing a
regulator for VDD_TS is crucial (since by default it can be connected
to other PMIC outputs and when other device puts down this regulator
the TMU will crash and shut down a system).
OK. I understand your point. Well, it depends on how you want to design
your driver. This is a clear case for having some sort of required
feature set bitmap, for instance. Each supported soc for your driver
would then have a bitmap indicating which features it actually supports.
Based on the bitmap you make it mandatory on your regulator_get
treatment. If it is mandatory, then you must clearly return an error
code. I have done a similar thing for the ti-soc-thermal driver
(drivers/staging/ti-soc-thermal/).
But again, this is your call, not sure if you want to go for that design
just for this item,
Still, if you keep the code the way it is, I d request to change your
message level to dev_warn. And in case you have a way to determine it is
a mandatory entry, then to dev_err
+ }
+
data = devm_kzalloc(&pdev->dev, sizeof(struct
exynos_tmu_data), GFP_KERNEL);
if (!data) {
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
