Hi Sylwester,
On Sat, Aug 10, 2013 at 3:44 AM, Sylwester Nawrocki
<[email protected]> wrote:
> Hi,
>
>
> On 08/07/2013 11:03 AM, Arun Kumar K wrote:
>>
>> This driver is for the FIMC-IS IP available in Samsung Exynos5
>> SoC onwards. This patch adds the core files for the new driver.
>>
>> Signed-off-by: Arun Kumar K<[email protected]>
>> Signed-off-by: Kilyeon Im<[email protected]>
>> ---
>> drivers/media/platform/exynos5-is/fimc-is-core.c | 413
>> ++++++++++++++++++++++
>> drivers/media/platform/exynos5-is/fimc-is-core.h | 134 +++++++
>> 2 files changed, 547 insertions(+)
>> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.c
>> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-core.h
>>
>> diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.c
>> b/drivers/media/platform/exynos5-is/fimc-is-core.c
>> new file mode 100644
>> index 0000000..067dea6
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos5-is/fimc-is-core.c
>> @@ -0,0 +1,413 @@
>> +/*
>> + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver
>> +*
>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>> + * Arun Kumar K<[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include<linux/bug.h>
>> +#include<linux/ctype.h>
>> +#include<linux/device.h>
>> +#include<linux/debugfs.h>
>> +#include<linux/delay.h>
>> +#include<linux/errno.h>
>> +#include<linux/err.h>
>> +#include<linux/firmware.h>
>> +#include<linux/fs.h>
>> +#include<linux/gpio.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/kernel.h>
>> +#include<linux/list.h>
>> +#include<linux/module.h>
>> +#include<linux/types.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/pm_runtime.h>
>> +#include<linux/slab.h>
>> +#include<linux/videodev2.h>
>> +#include<linux/of.h>
>> +#include<linux/of_gpio.h>
>> +#include<linux/of_address.h>
>> +#include<linux/of_platform.h>
>> +#include<linux/of_irq.h>
>> +#include<linux/pinctrl/consumer.h>
>
>
> nit: some entries are not in alphabetical order
>
>
>> +#include<media/v4l2-device.h>
>> +#include<media/v4l2-ioctl.h>
>> +#include<media/v4l2-mem2mem.h>
>> +#include<media/v4l2-of.h>
>> +#include<media/videobuf2-core.h>
>> +#include<media/videobuf2-dma-contig.h>
>> +
>> +#include "fimc-is.h"
>> +#include "fimc-is-i2c.h"
>> +
>> +#define CLK_MCU_ISP_DIV0_FREQ (200 * 1000000)
>> +#define CLK_MCU_ISP_DIV1_FREQ (100 * 1000000)
>> +#define CLK_ISP_DIV0_FREQ (134 * 1000000)
>> +#define CLK_ISP_DIV1_FREQ (68 * 1000000)
>> +#define CLK_ISP_DIVMPWM_FREQ (34 * 1000000)
>> +
>> +static char *fimc_is_clock_name[] = {
>
>
> static const * char const fimc_is_clock_name[] ?
>
Did you mean static const char *fimc_is_clock_name[] ?
The one you mentioned is giving syntax error.
>
>> + [IS_CLK_ISP] = "isp",
>> + [IS_CLK_MCU_ISP] = "mcu_isp",
>> + [IS_CLK_ISP_DIV0] = "isp_div0",
>> + [IS_CLK_ISP_DIV1] = "isp_div1",
>> + [IS_CLK_ISP_DIVMPWM] = "isp_divmpwm",
>> + [IS_CLK_MCU_ISP_DIV0] = "mcu_isp_div0",
>> + [IS_CLK_MCU_ISP_DIV1] = "mcu_isp_div1",
>> +};
>> +
>> +static void fimc_is_put_clocks(struct fimc_is *is)
>> +{
>> + int i;
>> +
>> + for (i = 0; i< IS_CLK_MAX_NUM; i++) {
>> + if (IS_ERR(is->clock[i]))
>> + continue;
>> + clk_unprepare(is->clock[i]);
>> + clk_put(is->clock[i]);
>> + is->clock[i] = NULL;
>
>
> is->clock[i] = ERR_PTR(-EINVAL);
>
>> + }
>> +}
>>
>> +
>> +static int fimc_is_get_clocks(struct fimc_is *is)
>> +{
>> + struct device *dev =&is->pdev->dev;
>>
>> + int i, ret;
>> +
>> + for (i = 0; i< IS_CLK_MAX_NUM; i++) {
>> + is->clock[i] = clk_get(dev, fimc_is_clock_name[i]);
>> + if (IS_ERR(is->clock[i]))
>> + goto err;
>> + ret = clk_prepare(is->clock[i]);
>> + if (ret< 0) {
>> + clk_put(is->clock[i]);
>> + is->clock[i] = ERR_PTR(-EINVAL);
>> + goto err;
>> + }
>> + }
>> + return 0;
>> +err:
>> + fimc_is_put_clocks(is);
>> + pr_err("Failed to get clock: %s\n", fimc_is_clock_name[i]);
>
>
> dev_err(dev, "...
>
>> + return -ENXIO;
>> +}
>> +
>> +static int fimc_is_configure_clocks(struct fimc_is *is)
>> +{
>> + int i, ret;
>> +
>> + for (i = 0; i< IS_CLK_MAX_NUM; i++)
>> + is->clock[i] = ERR_PTR(-EINVAL);
>> +
>> + ret = fimc_is_get_clocks(is);
>> + if (ret)
>> + return ret;
>> +
>> + /* Set rates */
>> + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV0],
>> + CLK_MCU_ISP_DIV0_FREQ);
>> + if (ret)
>> + return ret;
>> + ret = clk_set_rate(is->clock[IS_CLK_MCU_ISP_DIV1],
>> + CLK_MCU_ISP_DIV1_FREQ);
>> + if (ret)
>> + return ret;
>> + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV0], CLK_ISP_DIV0_FREQ);
>> + if (ret)
>> + return ret;
>> + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIV1], CLK_ISP_DIV1_FREQ);
>> + if (ret)
>> + return ret;
>> + ret = clk_set_rate(is->clock[IS_CLK_ISP_DIVMPWM],
>> + CLK_ISP_DIVMPWM_FREQ);
>> + return ret;
>> +}
>> +
>> +static void fimc_is_pipelines_destroy(struct fimc_is *is)
>> +{
>> + int i;
>> +
>> + for (i = 0; i< is->drvdata->num_instance; i++)
>> + fimc_is_pipeline_destroy(&is->pipeline[i]);
>> +}
>> +
>> +static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int
>> index,
>> + struct device_node *node)
>> +{
>> + struct fimc_is_sensor *sensor =&is->sensor[index];
>>
>> + u32 tmp = 0;
>> + int ret;
>> +
>> + sensor->drvdata = exynos5_is_sensor_get_drvdata(node);
>> + if (!sensor->drvdata) {
>> + dev_err(&is->pdev->dev, "no driver data found for: %s\n",
>> + node->full_name);
>> + return -EINVAL;
>> + }
>> +
>> + node = v4l2_of_get_next_endpoint(node, NULL);
>> + if (!node)
>> + return -ENXIO;
>> +
>> + node = v4l2_of_get_remote_port(node);
>> + if (!node)
>> + return -ENXIO;
>> +
>> + /* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */
>> + ret = of_property_read_u32(node, "reg",&tmp);
>> + if (ret< 0) {
>> + dev_err(&is->pdev->dev, "reg property not found at: %s\n",
>> + node->full_name);
>> + return ret;
>> + }
>> +
>> + sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0;
>> + return 0;
>> +}
>> +
>> +static int fimc_is_parse_sensor(struct fimc_is *is)
>> +{
>> + struct device_node *i2c_bus, *child;
>> + int ret, index = 0;
>> +
>> + for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) {
>> + for_each_available_child_of_node(i2c_bus, child) {
>> + ret = fimc_is_parse_sensor_config(is, index,
>> child);
>> +
>> + if (ret< 0 || index>= FIMC_IS_NUM_SENSORS) {
>> + of_node_put(child);
>> + return ret;
>> + }
>> + index++;
>> + }
>> + }
>> + return 0;
>> +}
>> +
>> +static void *fimc_is_get_drvdata(struct platform_device *pdev);
>> +
>> +static int fimc_is_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev =&pdev->dev;
>>
>> + struct resource *res;
>> + struct fimc_is *is;
>> + void __iomem *regs;
>> + struct device_node *node;
>> + int irq, ret;
>> + int i;
>> +
>> + dev_dbg(dev, "FIMC-IS Probe Enter\n");
>> +
>> + if (!pdev->dev.of_node)
>> + return -ENODEV;
>> +
>> + is = devm_kzalloc(&pdev->dev, sizeof(*is), GFP_KERNEL);
>> + if (!is)
>> + return -ENOMEM;
>> +
>> + is->pdev = pdev;
>> +
>> + is->drvdata = fimc_is_get_drvdata(pdev);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + regs = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> +
>> + /* Get the PMU base */
>> + node = of_get_child_by_name(dev->of_node, "pmu");
>
>
> I think we should, as Stephen suggested, add the PMU device node and
> reference
> it here through a phandle instead.
>
Ok I will add a pmu node and use its phandle in fimc-is node.
>
>> + if (!node)
>> + return -ENODEV;
>> + is->pmu_regs = of_iomap(node, 0);
>> + if (!is->pmu_regs)
>> + return -ENOMEM;
>> +
>> + irq = irq_of_parse_and_map(dev->of_node, 0);
>> + if (irq< 0) {
>> + dev_err(dev, "Failed to get IRQ\n");
>> + return irq;
>> + }
>> +
>> + ret = fimc_is_configure_clocks(is);
>> + if (ret< 0) {
>> + dev_err(dev, "clocks configuration failed\n");
>> + goto err_clk;
>> + }
>> +
>> + platform_set_drvdata(pdev, is);
>> + pm_runtime_enable(dev);
>> +
>> + ret = pm_runtime_get_sync(dev);
>> + if (ret< 0)
>> + goto err_pm;
>> +
>> + is->alloc_ctx = vb2_dma_contig_init_ctx(dev);
>> + if (IS_ERR(is->alloc_ctx)) {
>> + ret = PTR_ERR(is->alloc_ctx);
>> + goto err_vb;
>> + }
>> +
>> + /* Get IS-sensor contexts */
>> + ret = fimc_is_parse_sensor(is);
>> + if (ret< 0)
>> + goto err_vb;
>> +
>> + /* Initialize FIMC Pipeline */
>> + for (i = 0; i< is->drvdata->num_instance; i++) {
>> + ret = fimc_is_pipeline_init(&is->pipeline[i], i, is);
>> + if (ret< 0)
>> + goto err_sd;
>> + }
>> +
>> + /* Initialize FIMC Interface */
>> + ret = fimc_is_interface_init(&is->interface, regs, irq);
>> + if (ret< 0)
>> + goto err_sd;
>> +
>> + pm_runtime_put(dev);
>> +
>> + dev_dbg(dev, "FIMC-IS registered successfully\n");
>> +
>> + return 0;
>> +
>> +err_sd:
>> + fimc_is_pipelines_destroy(is);
>> +err_vb:
>> + vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
>> +err_pm:
>> + pm_runtime_put(dev);
>> +err_clk:
>> + fimc_is_put_clocks(is);
>> +
>> + return ret;
>> +}
>> +
>> +int fimc_is_clk_enable(struct fimc_is *is)
>> +{
>> + int ret;
>> +
>> + ret = clk_enable(is->clock[IS_CLK_ISP]);
>> + if (ret)
>> + return ret;
>> + ret = clk_enable(is->clock[IS_CLK_MCU_ISP]);
>> + return ret;
>
>
> return clk_enable(is->clock[IS_CLK_MCU_ISP]);
>
>> +}
>>
>> +
>> +void fimc_is_clk_disable(struct fimc_is *is)
>> +{
>> + clk_disable(is->clock[IS_CLK_ISP]);
>> + clk_disable(is->clock[IS_CLK_MCU_ISP]);
>> +}
>> +
>> +static int fimc_is_pm_resume(struct device *dev)
>> +{
>> + struct fimc_is *is = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = fimc_is_clk_enable(is);
>> + if (ret< 0) {
>> + dev_err(dev, "Could not enable clocks\n");
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static int fimc_is_pm_suspend(struct device *dev)
>> +{
>> + struct fimc_is *is = dev_get_drvdata(dev);
>> +
>> + fimc_is_clk_disable(is);
>> + return 0;
>> +}
>> +
>> +static int fimc_is_runtime_resume(struct device *dev)
>> +{
>> + return fimc_is_pm_resume(dev);
>> +}
>> +
>> +static int fimc_is_runtime_suspend(struct device *dev)
>> +{
>> + return fimc_is_pm_suspend(dev);
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int fimc_is_resume(struct device *dev)
>> +{
>> + /* TODO */
>> + return 0;
>> +}
>> +
>> +static int fimc_is_suspend(struct device *dev)
>> +{
>> + /* TODO */
>> + return 0;
>> +}
>> +#endif /* CONFIG_PM_SLEEP */
>> +
>> +static int fimc_is_remove(struct platform_device *pdev)
>> +{
>> + struct fimc_is *is = platform_get_drvdata(pdev);
>> + struct device *dev =&pdev->dev;
>>
>> +
>> + pm_runtime_disable(dev);
>> + pm_runtime_set_suspended(dev);
>> + fimc_is_pipelines_destroy(is);
>> + vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
>> + fimc_is_put_clocks(is);
>> + return 0;
>> +}
>> +
>> +static const struct dev_pm_ops fimc_is_pm_ops = {
>> + SET_SYSTEM_SLEEP_PM_OPS(fimc_is_suspend, fimc_is_resume)
>> + SET_RUNTIME_PM_OPS(fimc_is_runtime_suspend,
>> fimc_is_runtime_resume,
>> + NULL)
>> +};
>> +
>> +static struct fimc_is_drvdata exynos5250_drvdata = {
>> + .num_instance = 1,
>
>
> nit: s/num_instance/num_instances ?
>
>
>> + .fw_name = "exynos5_fimc_is_fw.bin",
>> +};
>> +
>> +static const struct of_device_id exynos5_fimc_is_match[] = {
>> + {
>> + .compatible = "samsung,exynos5250-fimc-is",
>> + .data =&exynos5250_drvdata,
>> + },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, exynos5_fimc_is_match);
>> +
>> +static void *fimc_is_get_drvdata(struct platform_device *pdev)
>> +{
>> + struct fimc_is_drvdata *driver_data = NULL;
>> +
>> + if (pdev->dev.of_node) {
>> + const struct of_device_id *match;
>> + match = of_match_node(exynos5_fimc_is_match,
>> + pdev->dev.of_node);
>> + if (match)
>> + driver_data = (struct fimc_is_drvdata
>> *)match->data;
>> + }
>> + return driver_data;
>> +}
>> +
>> +static struct platform_driver fimc_is_driver = {
>> + .probe = fimc_is_probe,
>> + .remove = fimc_is_remove,
>> + .driver = {
>> + .name = FIMC_IS_DRV_NAME,
>> + .owner = THIS_MODULE,
>> + .pm =&fimc_is_pm_ops,
>> + .of_match_table = exynos5_fimc_is_match,
>> + }
>> +};
>> +module_platform_driver(fimc_is_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Arun Kumar K<[email protected]>");
>> +MODULE_DESCRIPTION("Samsung Exynos5 (FIMC-IS) Imaging Subsystem driver");
>> diff --git a/drivers/media/platform/exynos5-is/fimc-is-core.h
>> b/drivers/media/platform/exynos5-is/fimc-is-core.h
>> new file mode 100644
>> index 0000000..a0568f1
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos5-is/fimc-is-core.h
>> @@ -0,0 +1,134 @@
>> +/*
>> + * Samsung EXYNOS5 FIMC-IS (Imaging Subsystem) driver
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>> + * Arun Kumar K<[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +#ifndef FIMC_IS_CORE_H_
>> +#define FIMC_IS_CORE_H_
>> +
>> +#include<linux/bug.h>
>> +#include<linux/clk.h>
>> +#include<linux/device.h>
>> +#include<linux/errno.h>
>> +#include<linux/firmware.h>
>> +#include<linux/interrupt.h>
>> +#include<linux/kernel.h>
>> +#include<linux/list.h>
>> +#include<linux/module.h>
>> +#include<linux/types.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/pm_runtime.h>
>> +#include<linux/slab.h>
>> +#include<linux/videodev2.h>
>> +
>
>
> nit: unnecessary empty line
>
>
>> +#include<asm/barrier.h>
>> +#include<linux/sizes.h>
>> +#include<linux/io.h>
>> +#include<linux/irqreturn.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/sched.h>
>> +#include<linux/spinlock.h>
>> +
>> +#include<media/media-entity.h>
>> +#include<media/videobuf2-core.h>
>> +#include<media/v4l2-ctrls.h>
>> +#include<media/v4l2-device.h>
>> +#include<media/v4l2-mem2mem.h>
>> +#include<media/v4l2-mediabus.h>
>> +#include<media/s5p_fimc.h>
>
>
> nit: some entries are not in alphabetical order
>
>
>> +#define FIMC_IS_DRV_NAME "exynos5-fimc-is"
>> +
>> +#define FIMC_IS_COMMAND_TIMEOUT (3 * HZ)
>> +#define FIMC_IS_STARTUP_TIMEOUT (3 * HZ)
>> +#define FIMC_IS_SHUTDOWN_TIMEOUT (10 * HZ)
>> +
>> +#define FW_SHARED_OFFSET (0x8c0000)
>> +#define DEBUG_CNT (500 * 1024)
>> +#define DEBUG_OFFSET (0x840000)
>> +#define DEBUGCTL_OFFSET (0x8bd000)
>> +#define DEBUG_FCOUNT (0x8c64c0)
>> +
>> +#define FIMC_IS_MAX_INSTANCES 1
>> +
>> +#define FIMC_IS_NUM_SENSORS 2
>> +#define FIMC_IS_NUM_PIPELINES 1
>> +
>> +#define FIMC_IS_MAX_PLANES 3
>> +#define FIMC_IS_NUM_SCALERS 2
>> +
>> +enum fimc_is_clks {
>> + IS_CLK_ISP,
>> + IS_CLK_MCU_ISP,
>> + IS_CLK_ISP_DIV0,
>> + IS_CLK_ISP_DIV1,
>> + IS_CLK_ISP_DIVMPWM,
>> + IS_CLK_MCU_ISP_DIV0,
>> + IS_CLK_MCU_ISP_DIV1,
>> + IS_CLK_MAX_NUM
>> +};
>> +
>> +/* Video capture states */
>> +enum fimc_is_video_state {
>> + STATE_INIT,
>> + STATE_BUFS_ALLOCATED,
>> + STATE_RUNNING,
>> +};
>> +
>> +enum fimc_is_scaler_id {
>> + SCALER_SCC,
>> + SCALER_SCP
>> +};
>> +
>> +enum fimc_is_sensor_pos {
>> + SENSOR_CAM0,
>> + SENSOR_CAM1
>> +};
>> +
>> +struct fimc_is_buf {
>> + struct vb2_buffer vb;
>> + struct list_head list;
>> + unsigned int paddr[FIMC_IS_MAX_PLANES];
>> +};
>> +
>> +struct fimc_is_memory {
>> + /* physical base address */
>> + dma_addr_t paddr;
>> + /* virtual base address */
>> + void *vaddr;
>> + /* total length */
>> + unsigned int size;
>> +};
>> +
>> +struct fimc_is_meminfo {
>> + struct fimc_is_memory fw;
>> + struct fimc_is_memory shot;
>> + struct fimc_is_memory region;
>> + struct fimc_is_memory shared;
>> +};
>> +
>> +struct fimc_is_drvdata {
>> + unsigned int num_instance;
>> + char *fw_name;
>> +};
>> +
>> +/**
>> + * struct fimc_is_fmt - the driver's internal color format data
>> + * @name: format description
>> + * @fourcc: the fourcc code for this format
>> + * @depth: number of bytes per pixel
>> + * @num_planes: number of planes for this color format
>> + */
>> +struct fimc_is_fmt {
>> + char *name;
>> + unsigned int fourcc;
>> + unsigned int depth[FIMC_IS_MAX_PLANES];
>> + unsigned int num_planes;
>> +};
>> +
>> +#endif
>
>
> Otherwise looks good.
>
> Reviewed-by: Sylwester Nawrocki <[email protected]>
>
Thanks & Regards
Arun
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
