From: Mark Brown <[email protected]> The Arndale has a SMSC USB3503 connected in hardware only mode like a PHY, support it using the usb-nop-xceiv binding.
Note that due to a regrettable decision to use a regulator to represent the reset signal this uses a fixed voltage regulator to do that, there is a plan to use the reset controller binding once that is merged so it does not seem worthwhile to fix the usb-nop-xceiv driver at this point. Signed-off-by: Mark Brown <[email protected]> --- This doesn't 100% work right now since we don't yet have a solution to ensure that this gets started after the USB controller but those modifications are small (or can be done at runtime with module loading). arch/arm/boot/dts/exynos5250-arndale.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 96d528d..e477e23 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -539,4 +539,22 @@ rtc { status = "okay"; }; + + usb_hub_bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb_hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 1>; + connect-gpios = <&gpd1 7 1>; + }; + }; + + usb@12110000 { + usb-phy = <&usb2_phy>; + }; }; -- 1.8.4.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
