On 08/20/2013 07:52 AM, Tomasz Figa wrote:
> This patch updates description of device tree bindings for Exynos MCT
> (multicore timers). Namely:
> - added note about simplified specification of local timer interrupts,
> when using single per-processor interrupt for all local timers,
> - changed first example that was incorrectly suggesting that global
> timer interrupts are optional,
> - simplified example interrupt map,
> - added example showing simplified local timer interrupt specification.
> diff --git
> a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> -Example 1: In this example, the system uses only the first global timer
> - interrupt generated by MCT and the remaining three global timer
> - interrupts are unused. Two local timer interrupts have been
> - specified.
> + For MCT block that uses a per-processor interrupt for local timers, such
> + as ones compatible with "samusng,exynos4412-mct", only one local timer
samsung is typo'd there.
> +Example 2: In this example, the timer interrupts are connected to two
> separate
> + interrupt controllers. Hence, an interrupt-map is created to map
> + the interrupts to the respective interrupt controllers.
>
> mct@101C0000 {
> compatible = "samsung,exynos4210-mct";
> reg = <0x101C0000 0x800>;
> - interrupt-controller;
> - #interrups-cells = <2>;
> interrupt-parent = <&mct_map>;
> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
> - <4 0>, <5 0>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
>
> mct_map: mct-map {
> - #interrupt-cells = <2>;
> + #interrupt-cells = <1>;
> #address-cells = <0>;
> #size-cells = <0>;
I don't believe you need either of those two properties in a node solely
used as an interrupt map.
Also, why not put the interrupt-map property directly into the main mct
node; I don't believe there's any requirement nor advantage to it being
a separate node.
> - interrupt-map = <0x0 0 &combiner 23 3>,
> - <0x4 0 &gic 0 120 0>,
> - <0x5 0 &gic 0 121 0>;
> + interrupt-map = <0 &gic 0 57 0>,
> + <1 &gic 0 69 0>,
> + <2 &combiner 12 6>,
> + <3 &combiner 12 7>,
> + <4 &gic 0 42 0>,
> + <5 &gic 0 48 0>;
> };
> };
> +Example 3: In this example, the IP contains four local timers, but using
> + a per-processor interrupt to handle them. Either all the local
> + timer interrupts can be specified, with the same interrupt specifier
> + value or just the first one.
That sounds like it should be two separate examples.
Actually, there's already a 2-timer example above using separate
interrupts, so why not make this example *just* be for the
single-interrupt case?
> + mct@10050000 {
> + compatible = "samsung,exynos4412-mct";
> + reg = <0x10050000 0x800>;
> + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> + <0 42 0>/*, <0 42 0>, <0 42 0>, <0 42 0>*/;
> + };
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
