On Tue, Aug 27, 2013 at 4:31 PM, Mark Rutland <[email protected]> wrote:
> On Tue, Aug 27, 2013 at 10:22:31AM +0100, Yuvaraj Kumar C D wrote:
>> This patch adds the device tree node entries for exynos5420 SOC.
>> Exynos5420 has a different version of DWMMC controller,so a new
>> compatible string is used to distinguish it from the prior SOC's.
>>
>> This patch depends on
>> mmc: dw_mmc: exynos: Add a new compatible string for exynos5420
>>
>> changes since V3:
>> 1.change fifo-depth size from 0x80 to 0x40
>> 2.Move the below properties
>> a.card-detect-delay
>> b.samsung,dw-mshc-ciu-div
>> c.samsung,dw-mshc-sdr-timing
>> d.samsung,dw-mshc-ddr-timing
>> from SOC dts to board dts file as suggested by Doug Anderson
>>
>> changes since V2:
>> 1.dropped num-slots property from node as its not required
>> if number of card slots available is 1.
>>
>> 2.Move the below properties
>> a.fifo-depth
>> b.card-detect-delay
>> c.samsung,dw-mshc-ciu-div
>> d.samsung,dw-mshc-sdr-timing
>> e.samsung,dw-mshc-ddr-timing
>> from board dts to SOC dts,as these are not board specific properties.
>>
>> 3.Updated the binding document exynos-dw-mshc.txt.
>>
>> changes since V1:
>> 1.disable node by status = disabled in SOC file
>> 2.enable node by status = okay in board specific file
>>
>> Signed-off-by: Yuvaraj Kumar C D <[email protected]>
>> ---
>> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 4 ++
>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 34 +++++++++++++++++
>> arch/arm/boot/dts/exynos5420.dtsi | 39
>> ++++++++++++++++++++
>> 3 files changed, 77 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> index 6d1c098..25368e8 100644
>> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> @@ -16,6 +16,8 @@ Required Properties:
>> specific extensions.
>> - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
>> specific extensions.
>> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
>> + specific extensions.
>>
>> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card
>> interface
>> unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
>> @@ -31,6 +33,8 @@ Required Properties:
>> data rate mode operation. Refer notes below for the order of the cells
>> and the
>> valid values.
>>
>> +* bypass-smu: Bypass Security Management Unit of eMMC channel 0 and channel
>> 1.
>> +
>
> Could you elaborate on why this is needed?
Exynos5420 Mobile Storage Host controller has a Security Management
Unit (SMU) for
channel 0 and channel 1 (mainly for eMMC). This binding property
requires to add a quirk
to bypass SMU as it is not being used yet.
>
> Is the SMU broken or not present in some hardware revisions?
SMU is only present in channel 0 and channel 1,but not in channel 2.So
to distinguish this,
bypass-smu property has been added as quirks in the channel.
>
>> Notes for the sdr-timing and ddr-timing values:
>>
>> The order of the cells should be
>
> On an unrelated note, I see the binding in mainline defines a gpios
> property that doesn't seem to be used anywhere. Am I missing something,
> or do we just not have support for that part of the binding?
Yes,This document has been little outdated.I will update and post a
separate patch.
>
> Thanks,
> Mark.
>
>> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> index bafba25..576066c 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -31,6 +31,40 @@
>> };
>> };
>>
>> + dwmmc0@12200000 {
>> + status = "okay";
>> + broken-cd;
>> + bypass-smu;
>> + supports-highspeed;
>> + card-detect-delay = <200>;
>> + samsung,dw-mshc-ciu-div = <3>;
>> + samsung,dw-mshc-sdr-timing = <0 4>;
>> + samsung,dw-mshc-ddr-timing = <0 2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>> +
>> + slot@0 {
>> + reg = <0>;
>> + bus-width = <8>;
>> + };
>> + };
>> +
>> + dwmmc2@12220000 {
>> + status = "okay";
>> + supports-highspeed;
>> + card-detect-delay = <200>;
>> + samsung,dw-mshc-ciu-div = <3>;
>> + samsung,dw-mshc-sdr-timing = <2 3>;
>> + samsung,dw-mshc-ddr-timing = <1 2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> +
>> + slot@0 {
>> + reg = <0>;
>> + bus-width = <4>;
>> + };
>> + };
>> +
>> dp-controller@145B0000 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&dp_hpd>;
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi
>> b/arch/arm/boot/dts/exynos5420.dtsi
>> index d537cd7..3893f45 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -22,6 +22,9 @@
>> compatible = "samsung,exynos5420";
>>
>> aliases {
>> + mshc0 = &dwmmc_0;
>> + mshc1 = &dwmmc_1;
>> + mshc2 = &dwmmc_2;
>> pinctrl0 = &pinctrl_0;
>> pinctrl1 = &pinctrl_1;
>> pinctrl2 = &pinctrl_2;
>> @@ -84,6 +87,42 @@
>> clock-names = "mfc";
>> };
>>
>> + dwmmc_0: dwmmc0@12200000 {
>> + compatible = "samsung,exynos5420-dw-mshc";
>> + interrupts = <0 75 0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0x12200000 0x2000>;
>> + clocks = <&clock 351>, <&clock 132>;
>> + clock-names = "biu", "ciu";
>> + fifo-depth = <0x40>;
>> + status = "disabled";
>> + };
>> +
>> + dwmmc_1: dwmmc1@12210000 {
>> + compatible = "samsung,exynos5420-dw-mshc";
>> + interrupts = <0 76 0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0x12210000 0x2000>;
>> + clocks = <&clock 352>, <&clock 133>;
>> + clock-names = "biu", "ciu";
>> + fifo-depth = <0x40>;
>> + status = "disabled";
>> + };
>> +
>> + dwmmc_2: dwmmc2@12220000 {
>> + compatible = "samsung,exynos5420-dw-mshc";
>> + interrupts = <0 77 0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0x12220000 0x2000>;
>> + clocks = <&clock 353>, <&clock 134>;
>> + clock-names = "biu", "ciu";
>> + fifo-depth = <0x40>;
>> + status = "disabled";
>> + };
>> +
>> mct@101C0000 {
>> compatible = "samsung,exynos4210-mct";
>> reg = <0x101C0000 0x800>;
>> --
>> 1.7.9.5
>>
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
