Hi Chander,
On Wednesday 28 of August 2013 16:30:41 Chander Kashyap wrote:
> Two cells were used to specify interrupts in mct node, while second cell
> always remains unused. Hence use only one cell.
> Suggested by Tomasz Figa.
>
> Signed-off-by: Chander Kashyap <[email protected]>
> ---
> changes in v2:
> - Drop Changes for Exynos4 as done in separate patch by Tomasz
>
> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++----------
> 1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi index ef57277..f2f178a 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -102,23 +102,22 @@
> compatible = "samsung,exynos4210-mct";
> reg = <0x101C0000 0x800>;
> interrupt-controller;
> - #interrups-cells = <2>;
> + #interrups-cells = <1>;
Those two properties above are unused and in fact incorrect, because MCT is
not an interrupt controller, so they could be removed in a follow-up patch.
You can also check out the clean-up series I mentioned for other things
that could be cleaned up in Exynos 5 dtsi files.
> interrupt-parent = <&mct_map>;
> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
> - <4 0>, <5 0>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
> clocks = <&clock 1>, <&clock 335>;
> clock-names = "fin_pll", "mct";
>
> mct_map: mct-map {
> - #interrupt-cells = <2>;
> + #interrupt-cells = <1>;
> #address-cells = <0>;
> #size-cells = <0>;
> - interrupt-map = <0x0 0 &combiner 23 3>,
> - <0x1 0 &combiner 23 4>,
> - <0x2 0 &combiner 25 2>,
> - <0x3 0 &combiner 25 3>,
> - <0x4 0 &gic 0 120 0>,
> - <0x5 0 &gic 0 121 0>;
> + interrupt-map = <0 &combiner 23 3>,
> + <1 &combiner 23 4>,
> + <2 &combiner 25 2>,
> + <3 &combiner 25 3>,
> + <4 &gic 0 120 0>,
> + <5 &gic 0 121 0>;
> };
> };
Otherwise, looks fine. Thanks.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
