Hi Mark,
On Thursday 12 of September 2013 11:40:27 Mark Brown wrote:
> From: Mark Brown <[email protected]>
>
> Ensure that unused I2C controllers are not activated, causing problems
> due to inappropriate pinmuxing or similar, by marking the controllers as
> disabled by default and requiring boards to explicitly enable those that
> are in use.
>
> Signed-off-by: Mark Brown <[email protected]>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 31
> ++-----------------------------
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 25 +++++--------------------
> arch/arm/boot/dts/exynos5250-snow.dts | 4 ++++
> arch/arm/boot/dts/exynos5250.dtsi | 10 ++++++++++
> 4 files changed, 21 insertions(+), 49 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
> b/arch/arm/boot/dts/exynos5250-arndale.dts index 4687fa0..4c10901 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -31,6 +31,7 @@
> };
>
> i2c@12C60000 {
> + status = "okay";
I would keep the status properties at the end of all properties, indicating
that at this point the description is complete and also to be consistent
with other dts files around.
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <20000>;
> samsung,i2c-slave-addr = <0x66>;
> @@ -319,16 +320,8 @@
> };
> };
>
> - i2c@12C70000 {
> - status = "disabled";
> - };
> -
> - i2c@12C80000 {
> - status = "disabled";
> - };
> -
> i2c@12C90000 {
> - wm1811a@1a {
> + status = "okay";
Hmm, I sense something wrong going on here.
> compatible = "wlf,wm1811";
> reg = <0x1a>;
>
> @@ -346,26 +339,6 @@
> };
> };
>
> - i2c@12CA0000 {
> - status = "disabled";
> - };
> -
> - i2c@12CB0000 {
> - status = "disabled";
> - };
> -
> - i2c@12CC0000 {
> - status = "disabled";
> - };
> -
> - i2c@12CD0000 {
> - status = "disabled";
> - };
> -
> - i2c@121D0000 {
> - status = "disabled";
> - };
> -
> dwmmc_0: dwmmc0@12200000 {
> num-slots = <1>;
> supports-highspeed;
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 67d3c43..90127e3
> 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -28,6 +28,7 @@
> };
>
> i2c@12C60000 {
> + status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <20000>;
>
> @@ -62,6 +63,7 @@
> };
>
> i2c@12C70000 {
> + status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <20000>;
>
> @@ -86,6 +88,7 @@
> };
>
> i2c@121D0000 {
> + status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <40000>;
> samsung,i2c-slave-addr = <0x38>;
> @@ -101,6 +104,7 @@
> };
>
> i2c@12C80000 {
> + status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <66000>;
>
> @@ -110,27 +114,8 @@
> };
> };
>
> - i2c@12C90000 {
> - status = "disabled";
> - };
> -
> - i2c@12CA0000 {
> - status = "disabled";
> - };
> -
> - i2c@12CB0000 {
> - status = "disabled";
> - };
> -
> - i2c@12CC0000 {
> - status = "disabled";
> - };
> -
> - i2c@12CD0000 {
> - status = "disabled";
> - };
> -
> i2c@12CE0000 {
> + status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <66000>;
>
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts
> b/arch/arm/boot/dts/exynos5250-snow.dts index fd711e2..b7674d5 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -48,6 +48,10 @@
> };
> };
>
> + i2c@12CA0000 {
> + status = "okay";
Hmm, no other properties needed here?
> + };
> +
> i2c-arbitrator {
> compatible = "i2c-arb-gpio-challenge";
> #address-cells = <1>;
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi index a886ee4..4d6312e 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -229,6 +229,7 @@
>
> i2c_0: i2c@12C60000 {
> compatible = "samsung,s3c2440-i2c";
> + status = "disabled";
For the sake of consistency, I would place the status property as last here
as well.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
