Hi Sylwester,
Thanks for the comments.
On Mon, Sep 16, 2013 at 3:58 AM, Sylwester Nawrocki
<sylvester.nawro...@gmail.com> wrote:
> Hi Shaik,
>
> Thanks for addressing my comments, it really looks much better now.
> I have few more comments, mostly minor issues.
[...]
>> +
>> +const struct scaler_fmt *scaler_find_fmt(u32 *pixelformat,
>> + u32 *mbus_code, u32 index)
>> +{
>> + const struct scaler_fmt *fmt, *def_fmt = NULL;
>> + unsigned int i;
>> +
>> + if (index>= ARRAY_SIZE(scaler_formats))
>> + return NULL;
>> +
>> + for (i = 0; i< ARRAY_SIZE(scaler_formats); ++i) {
>> + fmt = scaler_get_format(i);
>> + if (pixelformat&& fmt->pixelformat == *pixelformat)
>> + return fmt;
>
>
>> + if (mbus_code&& fmt->mbus_code == *mbus_code)
>> + return fmt;
>
>
> is mbus_code ever used ?
Yes. Currently not used. Will remove this field for now..
>
>> + if (index == i)
>> + def_fmt = fmt;
>> + }
>> +
>> + return def_fmt;
>> +}
[...]
>> +
>> +int scaler_try_fmt_mplane(struct scaler_ctx *ctx, struct v4l2_format *f)
>> +{
>> + struct scaler_dev *scaler = ctx->scaler_dev;
>> + struct device *dev =&scaler->pdev->dev;
>>
>> + struct scaler_variant *variant = scaler->variant;
>> + struct v4l2_pix_format_mplane *pix_mp =&f->fmt.pix_mp;
>>
[...]
>> +
>> + /*
>> + * Nothing mentioned about the colorspace in SCALER. Default value
>> is
>> + * set to V4L2_COLORSPACE_REC709.
>> + */
>
>
> Isn't scaler_hw_set_csc_coef() function configuring the colorspace ?
Actually speaking this function should do the color space setting part.
What the SCALER ip supports is CSC offset value for Y
YCbCr to RGB : Zero offset of -16 offset for input
RGB to YCbCr : Zero offset of +16 offset for output
I think user should provide this information through some controls.
Anyways, will take it later.
>
>> + pix_mp->colorspace = V4L2_COLORSPACE_REC709;
>> +
>> + for (i = 0; i< pix_mp->num_planes; ++i) {
>> + int bpl = (pix_mp->width * fmt->depth[i])>> 3;
>> + pix_mp->plane_fmt[i].bytesperline = bpl;
>> + pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height;
>> +
>> + scaler_dbg(scaler, "[%d]: bpl: %d, sizeimage: %d",
>> + i, bpl, pix_mp->plane_fmt[i].sizeimage);
>> + }
>> +
>> + return 0;
>> +}
>> +
[...]
>> +static int scaler_runtime_resume(struct device *dev)
>> +{
>> + struct scaler_dev *scaler = dev_get_drvdata(dev);
>> + int ret = 0;
>> + scaler_dbg(scaler, "state: 0x%lx", scaler->state);
>> +
>> + ret = clk_enable(scaler->clock);
>> + if (ret< 0)
>> + return ret;
>> +
>> + scaler_sw_reset(scaler);
>> +
>> + return scaler_m2m_resume(scaler);
>
>
> Shouldn't there be clk_disable() when this function fails ?
this funciton scaler_m2m_resume() never fails.
Regards,
Shaik Ameer Basha
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
