From: Tarek Dakhran <t.dakh...@samsung.com>
Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board.
Signed-off-by: Tarek Dakhran <t.dakh...@samsung.com>
Signed-off-by: Vyacheslav Tyrtov <v.tyr...@samsung.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5410-smdk5410.dts | 65 ++++++++++
arch/arm/boot/dts/exynos5410.dtsi | 209 ++++++++++++++++++++++++++++++
3 files changed, 275 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts
create mode 100644 arch/arm/boot/dts/exynos5410.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 802720e..e991739 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5410-smdk5410.dtb \
exynos5420-smdk5420.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts
b/arch/arm/boot/dts/exynos5410-smdk5410.dts
new file mode 100644
index 0000000..c3d0b32
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -0,0 +1,65 @@
+/*
+ * SAMSUNG SMDK5410 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+ model = "Samsung SMDK5410 board based on EXYNOS5410";
+ compatible = "samsung,smdk5410", "samsung,exynos5410";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200";
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,clock-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ mmc@12200000 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ mmc@12220000 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+ };
+
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi
b/arch/arm/boot/dts/exynos5410.dtsi
new file mode 100644
index 0000000..92a5a73
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -0,0 +1,209 @@
+/*
+ * SAMSUNG EXYNOS5410 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
+ * EXYNOS5410 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos5410.h>
+#include "exynos5.dtsi"
+/ {
+ compatible = "samsung,exynos5410";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ cci-control-port = <&cci_control2>;
+ clock-frequency = <1600000000>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ cci-control-port = <&cci_control2>;
+ clock-frequency = <1600000000>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <2>;
+ cci-control-port = <&cci_control2>;
+ clock-frequency = <1600000000>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <3>;
+ cci-control-port = <&cci_control2>;
+ clock-frequency = <1600000000>;
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <1200000000>;
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <1200000000>;
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x102>;
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <1200000000>;
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x103>;
+ cci-control-port = <&cci_control1>;
+ clock-frequency = <1200000000>;
+ };
+ };
+
+ cci@10D20000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10D20000 0x1000>;
+ ranges = <0 0x10D20000 0x6000>;
+
+ cci_control0: slave-if@1000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace-lite";
+ reg = <0x1000 0x1000>;
+ };
+
+ cci_control1: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control2: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+ };
+
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5410-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0xB00>;
+ interrupt-controller;
+ #interrups-cells = <1>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0>, <1>, <2>, <3>,
+ <4>, <5>, <6>, <7>,
+ <8>, <9>, <10>, <11>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &combiner 23 3>,
+ <1 &combiner 23 4>,
+ <2 &combiner 25 2>,
+ <3 &combiner 25 3>,
+ <4 &gic 0 120 0>,
+ <5 &gic 0 121 0>,
+ <6 &gic 0 122 0>,
+ <7 &gic 0 123 0>,
+ <8 &gic 0 128 0>,
+ <9 &gic 0 129 0>,
+ <10 &gic 0 130 0>,
+ <11 &gic 0 131 0>;
+ };
+ };
+
+ mmc_0: mmc@12200000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12200000 0x1000>;
+ clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
+
+ mmc_1: mmc@12210000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 76 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12210000 0x1000>;
+ clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
+
+ mmc_2: mmc@12220000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 77 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12220000 0x1000>;
+ clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
+
+ serial@12C00000 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
+ serial@12C10000 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
+ serial@12C20000 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
+ serial@12C30000 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
+};
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
