Hello Wim Van Sebroeck, I believe that I addressed all the comments given by reviewers. So can you look into this series and take necessary action..?
Best Wishes, Leela Krishna. On Wed, Dec 18, 2013 at 9:01 PM, Leela Krishna Amudala <l.kris...@samsung.com> wrote: > Hello Wim Van Sebroeck, > > Can you kindly look into this series and take necessary action..? > > Best Wishes, > Leela Krishna. > > > On Fri, Dec 6, 2013 at 2:47 PM, Leela Krishna Amudala > <l.kris...@samsung.com> wrote: >> This patchset does the following things >> - Adds pmusysreg device node to exynos5.dtsi file >> - Adds watchdog DT nodes to Exynos5250 and 5420 >> - Uses syscon regmap interface to configure pmu registers >> to mask/unmask enable/disable of watchdog. >> >> This patch set is rebased on Kgene's for-next branch and tested on SMDK5420 >> >> changes since V11: >> - Added EXYNOS5 prefix to REG_OFFSET defines (suggested by Tomasz) >> - NEEDS_PMU_CONFIG => HAS_PMU_CONFIG (suggested by Olof, Guenter) >> - Move QUIRK_HAS_PMU_CONFIG check to >> s3c2410wdt_mask_and_disable_reset (suggested by Guenter) >> >> changes since V10: >> - followed coding style rules >> - removed duplicate error message suggested by Guenter Roeck >> <li...@roeck-us.net> >> >> changes since V9: >> - added descriptions to s3c2410_wdt_variant structure fields >> - moved calling s3c2410wdt_mask_and_disable_reset() function above >> s3c2410wdt_start() call in probe >> - put dev_err message back to s3c2410wdt_mask_and_disable_reset() >> function >> (suggested by Doug Anderson <diand...@chromium.org>) >> >> changes since V8: >> - modified the patch description for the below patch >> "watchdog: s3c2410_wdt: use syscon regmap interface to configure >> pmu register" >> - removed MODULE_ALIAS in watchdog driver >> - changed dev_warn to dev_err in one failure case handling >> (suggested by Guenter Roeck <li...@roeck-us.net>) >> - renamed variable name from pmu_config to drv_data >> - changed the compatible field description in documentation file >> (suggested by Tomasz Figa <t.f...@samsung.com>) >> >> changes since V7: >> - re-ordered the patches in the series >> - moved pmu_config_s3c2410 structure out of ifdef CONFIG_OF >> and limited only this structure to platform match table >> - renamed structure name from s3c_wdt_driver_ids to s3c2410_wdt_ids >> - removed exynos variants from platform match table >> (suggested by Tomasz Figa <t.f...@samsung.com>) >> >> changes since V6: >> - added SoC-specific compatible value to syscon node and documented >> it >> - given more patch description for below patch >> ARM: dts: update watchdog device nodes for Exynos5250 and >> Exynos5420 >> - added platform_device_id array for watchdog devices >> - selected MFD_SYSCON in Kconfig entry for watchdog >> >> Changes since V5: >> - removed status property in DT nodes >> - changed the return type for the function >> s3c2410wdt_mask_and_disable_reset() >> and handled error cases >> - Handled to get driver data in non-DT cases >> - Addressed comments given by Tomasz Figa <t.f...@samsung.com> >> >> Changes since V4: >> - changed the node name from pmusysreg to syscon and node label from >> pmu_sys_reg to pmu_syscon >> - changed the property name from samsung,pmusysreg to >> samsung,syscon-phandle >> - used regmap_update_bits instead of remap_read/regmap_write >> - Addressed other comments given by Tomasz Figa <t.f...@samsung.com> >> >> Changes since V3: >> - changed the compatible strings for watchdog node >> - splitted up adding pmusysreg node and made it separate patch >> - Addressed comments given by Sachin Kamat <sachin.ka...@linaro.org> >> >> Changes since V2: >> - used syscon regmap interface to configure pmu registers in WDT >> driver >> (suggested by Tomasz Figa <t.f...@samsung.com>) >> >> Changes since V1: >> - Added new compatible string for Exynos5 SoCs >> - Introduced quirk mechanism to program PMU registers >> - Addressed comments given by Tomasz Figa <t.f...@samsung.com> >> >> Leela Krishna Amudala (3): >> ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files >> watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu >> register >> ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420 >> >> .../devicetree/bindings/arm/samsung/pmu.txt | 15 ++ >> .../devicetree/bindings/watchdog/samsung-wdt.txt | 21 ++- >> arch/arm/boot/dts/exynos5.dtsi | 7 - >> arch/arm/boot/dts/exynos5250.dtsi | 11 +- >> arch/arm/boot/dts/exynos5420.dtsi | 14 ++ >> drivers/watchdog/Kconfig | 1 + >> drivers/watchdog/s3c2410_wdt.c | 154 >> ++++++++++++++++++-- >> 7 files changed, 205 insertions(+), 18 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt >> >> -- >> 1.7.10.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" >> in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
