Hi Rahul,
On 11.02.2014 06:22, Rahul Sharma wrote:
Hi Tomasz,
On 6 February 2014 18:51, Tomasz Figa <t.f...@samsung.com> wrote:
Hi Rahul, Pankaj, Arun,
[adding linux-arm-kernel, devicetree MLs and DT people on Cc]
I think it's good time to stop accepting DTS files like this and force new
ones to use the proper structure with soc node, labels for every node and
node references.
I am unable to find information on SoC node and grouping inside SoC node. Please
share some pointers.
Well, there is not much information needed about this. Basically all the
devices built into the SoC should be listed under respective bus nodes
or a single soc node, instead of root level. Such node should be a
"simple-bus" and just group the components together to separate
board-specific devices (which are still at root level) from SoC devices.
Even though it might seem useless, it improves DT readability a bit and
still most of the platforms use this approach, so for consistency,
Exynos should use too.
Just for reference, back in April 2013, in his review of S3C64xx DT
series [1], Rob Herring requested that we don't submit any new device
trees using flat approach and start using bus hierarchy.
[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/163659.html
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2",
"gpa2-3";
What is the reason for SPI0 to have 4 pins, while SPI1 has just 3?
I should align SPI1 with SPI0.
Are you sure that SPI0 is the correct one? SPI usually uses four pins -
SDI, SDO, SCK and nCS, but we always used to treat nCS as a simple GPIO,
due to the fact that the controller can only support one dedicated chip
select and with direct GPIO control you can have more.
What is the fourth pin here?
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ cci-control-port = <&cci_control1>;
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ cci-control-port = <&cci_control0>;
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ cci-control-port = <&cci_control0>;
+ };
+ cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x102>;
+ cci-control-port = <&cci_control0>;
+ };
+ cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x103>;
+ cci-control-port = <&cci_control0>;
+ };
+ };
+
+ cmus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
I don't think there is a need to group these nodes under a parent node that
doesn't give any additional information, especially when the CMUs are
scattered trough the whole address space, while we'd like to keep the nodes
ordered by their addresses, as most platforms do.
This is exactly the same case as "cpus". I mean, "cpus" also doesn't provide
any common information about child cpu nodes. This looks to me as a logical
grouping and I have implemented same thing for cmu nodes.
I am ok with removing this grouping Just want to understand the rational behind
grouping cpus which seems similar to cmus.
The "cpus" node is a defined standard node that should be present at
root of device tree and include subnodes for all CPUs. This is a
standard binding defined for low level code to be able to simply find
nodes of all CPUs in the system - so they can expect that at /cpus node
all the subnodes are subsequent CPUs.
Similarly "soc" is just a logical entity used to group SoC elements which looks
optional to me. What are we achieving with this? Please help me in understanding
this better.
Also "soc" has a slightly wider meaning. It is a node grouping all nodes
from a single address space - the node specifies #address-cells and
#size-cells of this address space and all the devices under this
"simple-bus" can be accessed using addresses in this format. In
addition, it separates board-level devices from generic SoC devices.
Now, in case of "cmus", the only purpose is to group all CMU nodes
together and, while this improves readability a bit, it doesn't make the
DT better express the hardware topology, because the CMUs in the
hardware are in fact scattered through the whole address space, not
under a contiguous block of it, as the grouping would suggest.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
