From: Prathyush K <prathyus...@samsung.com>

While powering on/off a local powerdomain in exynos5 chipsets, the input
clocks to each device gets modified. This behaviour is based on the
SYSCLK_SYS_PWR_REG registers.
E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC
                                   (aclk333) gets modified to oscclk
                            = 0x1, no change in clocks.
The recommended value of SYSCLK_SYS_PWR_REG before power gating any
domain is 0x0. So we must also restore the clocks while powering on a
domain everytime.

This patch adds the framework for getting the required mux and parent clocks
through a power domain device node.
Just setting the parent while powering on is not enough since according
to the clock framework, the parent has never changed. So we set the
parent clock as oscclk before power gating and then set back the correct
parent clock after powering on a domain.

Signed-off-by: Prathyush K <prathyus...@samsung.com>
Signed-off-by: Andrew Bresticker <abres...@chromium.org>
Signed-off-by: Arun Kumar K <arun...@samsung.com>
---
This patch is posted for getting the opinion from all on what would
be the best possible solution to the issue at hand.
The issue is observed with multiple IPs like MFC, GSC, G2D, MSC etc.
where after a PD OFF-ON sequence, the parent clock gets reset to oscclk.
I would like to get the opinion from all on what would be the right
place to handle this. Either the clock re-parenting should be done
by all these individual IP drivers
OR
power-domain driver can handle this at a common place as is being done
in this patch.

One more possible change I can do is to make a exynos5250 compatible for
the power-domain driver and get the extra clocks only for exynos5 onwards.
But since there are no errors being reported even if these clocks are not
provided, these changes are fully backward compatible with exynos4 also.
---
 .../bindings/arm/exynos/power_domain.txt           |   18 +++++++
 arch/arm/mach-exynos/pm_domains.c                  |   56 +++++++++++++++++++-
 2 files changed, 73 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt 
b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index 5216b41..2e19a9f 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -9,6 +9,16 @@ Required Properties:
 - reg: physical base address of the controller and length of memory mapped
     region.
 
+Optional Properties:
+- clocks: List of clock handles. The parent clocks of the input clocks to the
+  devices in this power domain are set to oscclk before power gating and
+  restored back after powering on a domain. This is required for all domains
+  which are powered on and off and not required for unused domains.
+  The following clocks can be specified:
+  - oscclk: oscillator clock.
+  - clk(n): input clock to the devices in this power domain
+  - pclk(n): parent clock of input clock to the devices in this power domain
+
 Node of a device using power domains must have a samsung,power-domain property
 defined with a phandle to respective power domain.
 
@@ -19,6 +29,14 @@ Example:
                reg = <0x10023C00 0x10>;
        };
 
+       mfc_pd: power-domain@10044060 {
+               compatible = "samsung,exynos4210-pd";
+               reg = <0x10044060 0x20>;
+               clocks = <&clock CLK_FIN_PLL>, <&clock MOUT_SW_ACLK333>,
+                       <&clock MOUT_USER_ACLK333>;
+               clock-names = "oscclk", "pclk0", "clk0";
+       };
+
 Example of the node using power domain:
 
        node {
diff --git a/arch/arm/mach-exynos/pm_domains.c 
b/arch/arm/mach-exynos/pm_domains.c
index fe6570e..e5fe76d 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/pm_domain.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
@@ -24,6 +25,8 @@
 
 #include "regs-pmu.h"
 
+#define MAX_CLK_PER_DOMAIN                     4
+
 /*
  * Exynos specific wrapper around the generic power domain
  */
@@ -32,6 +35,9 @@ struct exynos_pm_domain {
        char const *name;
        bool is_off;
        struct generic_pm_domain pd;
+       struct clk *oscclk;
+       struct clk *clk[MAX_CLK_PER_DOMAIN];
+       struct clk *pclk[MAX_CLK_PER_DOMAIN];
 };
 
 static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@@ -44,6 +50,18 @@ static int exynos_pd_power(struct generic_pm_domain *domain, 
bool power_on)
        pd = container_of(domain, struct exynos_pm_domain, pd);
        base = pd->base;
 
+       /* Set oscclk before powering off a domain*/
+       if (!power_on) {
+               int i;
+               for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+                       if (!pd->clk[i])
+                               break;
+                       if (clk_set_parent(pd->clk[i], pd->oscclk))
+                               pr_info("%s: error setting oscclk as parent to 
clock %d\n",
+                                               pd->name, i);
+               }
+       }
+
        pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
        __raw_writel(pwr, base);
 
@@ -60,6 +78,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, 
bool power_on)
                cpu_relax();
                usleep_range(80, 100);
        }
+
+       /* Restore clocks after powering on a domain*/
+       if (power_on) {
+               int i;
+               for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+                       if (!pd->clk[i])
+                               break;
+                       if (clk_set_parent(pd->clk[i], pd->pclk[i]))
+                               pr_info("%s: error setting parent to clock%d\n",
+                                               pd->name, i);
+               }
+       }
+
        return 0;
 }
 
@@ -152,9 +183,11 @@ static __init int exynos4_pm_init_power_domain(void)
 
        for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
                struct exynos_pm_domain *pd;
-               int on;
+               int on, i;
+               struct device *dev;
 
                pdev = of_find_device_by_node(np);
+               dev = &pdev->dev;
 
                pd = kzalloc(sizeof(*pd), GFP_KERNEL);
                if (!pd) {
@@ -170,6 +203,27 @@ static __init int exynos4_pm_init_power_domain(void)
                pd->pd.power_on = exynos_pd_power_on;
                pd->pd.of_node = np;
 
+               pd->oscclk = devm_clk_get(dev, "oscclk");
+               if (IS_ERR(pd->oscclk))
+                       goto no_clk;
+
+               for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+                       struct clk *tmp, *tmp_parent;
+                       char clk_name[8];
+
+                       snprintf(clk_name, sizeof(clk_name), "clk%d", i);
+                       tmp = devm_clk_get(dev, clk_name);
+                       if (IS_ERR(tmp))
+                               break;
+                       snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
+                       tmp_parent = devm_clk_get(dev, clk_name);
+                       if (IS_ERR(tmp_parent))
+                               break;
+                       pd->clk[i] = tmp;
+                       pd->pclk[i] = tmp_parent;
+               }
+
+no_clk:
                platform_set_drvdata(pdev, pd);
 
                on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to