On 05/15/14 04:35, Tomasz Figa wrote:
Hi,

On 13.05.2014 15:05, Chanwoo Choi wrote:
The Exynos3250 clocks are statically listed and registered using the
Samsung specific common clock helper functions. Both device tree based
clock lookup and clkdev based clock lookups are supported.

Signed-off-by: Chanwoo Choi<cw00.c...@samsung.com>
Signed-off-by: Tomasz Figa<t.f...@samsung.com>
Acked-by: Kyungmin Park<kyungmin.p...@samsung.com>
Cc: Mike Turquette<mturque...@linaro.org>
Cc: Kukjin Kim<kgene....@samsung.com>
Cc: Rob Herring<robh...@kernel.org>
Cc: Pawel Moll<pawel.m...@arm.com>
Cc: Mark Rutland<mark.rutl...@arm.com>
Cc: Ian Campbell<ijc+devicet...@hellion.org.uk>
Cc: Kumar Gala<ga...@codeaurora.org>
Cc: Randy Dunlap<rdun...@infradead.org>
Cc: Tomasz Figa<t.f...@samsung.com>
---
  .../devicetree/bindings/clock/exynos3250-clock.txt | 41 ++++++++++++++++++++++
  1 file changed, 41 insertions(+)
  create mode 100644 
Documentation/devicetree/bindings/clock/exynos3250-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt 
b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
new file mode 100644
index 0000000..aadc9c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
@@ -0,0 +1,41 @@
+* Samsung Exynos3250 Clock Controller
+
+The Exynos3250 clock controller generates and supplies clock to various
+controllers within the Exynos3250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos3250.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+       cmu: clock-controller@10030000 {
+               compatible = "samsung,exynos3250-cmu";
+               reg =<0x10030000 0x20000>;
+               #clock-cells =<1>;
+       };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+          controller. Refer to the standard clock bindings for information
+          about 'clocks' and 'clock-names' property.
+
+       serial@13800000 {
+               compatible = "samsung,exynos4210-uart";
+               reg =<0x13800000 0x100>;
+               interrupts =<0 109 0>;
+               clocks =<&cmu CLK_UART0>,<&cmu CLK_SCLK_UART0>;
+               clock-names = "uart", "clk_uart_baud0";
+       };


Oops, I've forgotten to apply this one. Since it doesn't have any
dependencies, Kukjin, could you apply it on top of my pull requests with
my Ack? Thanks in advance.

Acked-by: Tomasz Figa<t.f...@samsung.com>

Sure, I will do it on your 4/4 pull-request after pulling it into samsung tree.

Thanks,
Kukjin
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to