On 23 May 2014 19:57, Thomas Abraham <[email protected]> wrote:
> From: Thomas Abraham <[email protected]>
>
> Lookup for the optional boost-frequency property in cpu0 node and if
> available, enable support for boost mode frequencies. The frequencies
> usable in boost mode are determined while preparing the cpufreq table
> from the list of operating points available.
>
> Cc: Shawn Guo <[email protected]>
> Cc: Lukasz Majewski <[email protected]>
> Signed-off-by: Thomas Abraham <[email protected]>
> ---
> .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 2 ++
> drivers/cpufreq/Kconfig | 1 +
> drivers/cpufreq/cpufreq-cpu0.c | 3 +++
> 3 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> index f055515..60f321a 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
> @@ -19,6 +19,8 @@ Optional properties:
> - cooling-min-level:
> - cooling-max-level:
> Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
> +- boost-frequency:
> + Please refer to
> Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
>
> Examples:
>
> diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> index 1fbe11f..52741b9 100644
> --- a/drivers/cpufreq/Kconfig
> +++ b/drivers/cpufreq/Kconfig
> @@ -187,6 +187,7 @@ config GENERIC_CPUFREQ_CPU0
> tristate "Generic CPU0 cpufreq driver"
> depends on HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL
> select PM_OPP
> + select CPU_FREQ_BOOST_SW
Drop this. Select it from your platform driver if you want.
> help
> This adds a generic cpufreq driver for CPU0 frequency management.
> It supports both uniprocessor (UP) and symmetric multiprocessor
> (SMP)
> diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
> index 1bf6bba..93d3d6d 100644
> --- a/drivers/cpufreq/cpufreq-cpu0.c
> +++ b/drivers/cpufreq/cpufreq-cpu0.c
> @@ -194,6 +194,9 @@ static int cpu0_cpufreq_probe(struct platform_device
> *pdev)
> transition_latency += ret * 1000;
> }
>
> + if (of_find_property(cpu_dev->of_node, "boost-frequencies", NULL))
> + cpu0_cpufreq_driver.boost_supported = true;
> +
> ret = cpufreq_register_driver(&cpu0_cpufreq_driver);
> if (ret) {
> pr_err("failed register driver: %d\n", ret);
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
