> -----Original Message-----
> From: Sethi Varun-B16395
> Sent: Tuesday, June 17, 2014 6:22 AM
> To: Will Deacon
> Cc: Mark Rutland; devicet...@vger.kernel.org; linux-samsung-
> s...@vger.kernel.org; Arnd Bergmann; Pawel Moll; Ian Campbell; Grant
> Grundler; Stephen Warren; Yoder Stuart-B08248; Rob Herring; linux-
> ker...@vger.kernel.org; Marc Zyngier; Linux IOMMU; Thierry Reding; Kumar
> Gala; linux-te...@vger.kernel.org; Cho KyongHo; Dave P Martin; linux-arm-
> ker...@lists.infradead.org
> Subject: RE: [PATCH v2] devicetree: Add generic IOMMU device tree
> bindings
> 
> 
> 
> > -----Original Message-----
> > From: iommu-boun...@lists.linux-foundation.org [mailto:iommu-
> > boun...@lists.linux-foundation.org] On Behalf Of Will Deacon
> > Sent: Tuesday, June 17, 2014 4:13 PM
> > To: Sethi Varun-B16395
> > Cc: Mark Rutland; devicet...@vger.kernel.org; linux-samsung-
> > s...@vger.kernel.org; Arnd Bergmann; Pawel Moll; Ian Campbell; Grant
> > Grundler; Stephen Warren; Yoder Stuart-B08248; Rob Herring; linux-
> > ker...@vger.kernel.org; Marc Zyngier; Linux IOMMU; Thierry Reding;
> Kumar
> > Gala; linux-te...@vger.kernel.org; Cho KyongHo; Dave P Martin; linux-
> arm-
> > ker...@lists.infradead.org
> > Subject: Re: [PATCH v2] devicetree: Add generic IOMMU device tree
> > bindings
> >
> > On Tue, Jun 17, 2014 at 11:26:48AM +0100, Varun Sethi wrote:
> > > > The way we generally thought it would work was something like
> > > > this:
> > > >    -u-boot/bootloader makes any static streamID allocation if
> needed,
> > > >     sets a default streamID  (e.g. 0x0) in device and expresses
> > > >     that in the device tree
> > > >    -device tree would express relationship between devices
> > > >     (including bus controllers) and the SMMU through mmu-masters
> > > >     property
> > > >    -u-boot would express the range of unused (or used) streamIDs
> via
> > > > a new
> > > >     device tree property so the kernel SMMU driver knows what
> > > > streamIDs are
> > > >     free
> > > >    -in the SMMU driver a different vendor specific 'add_device'
> > callback
> > > >     could be used to handle our special cases where we need to
> > set/change
> > > >     the stream ID for devices added to a domain
> > >
> > > Another possibility, could be to program the stream Id in the device
> > > registers (reference for the stream ID register can be obtained from
> > > the device tree) during device attach. This could be relevant in case
> > > of VFIO, when we are assigning multiple devices to a single VM. All
> > > the devices can share the same stream ID.
> >
> > I think for simple masters (i.e. those that have all their StreamIDs
> > under control of one driver), then setting something during attach (or
> > add?) based on the DT could work pretty well. The other case is when we
> > have masters behind a bridge (such as a PCI RC). In this case, it might
> > actually be better to ask the bridge for the IDs and let it sort out
> the
> > allocation itself. That would also move the RequesterID -> StreamID
> > mapping out of the SMMU code.
> >
> > What do you think?
> The PCI bus iommu group creation code would be part of the SMMU driver
> (it is handled by other IOMMU drivers as well). My understanding is that
> there would be one is to one correspondence between the requestor ID and
> the iommu group. May be, we can have an API provided by the PCI bridge
> (architecture specific) for setting the stream ID.

I think Will is suggesting something along those lines-- I think it's a
question of where the streamID allocation happens.  You could
either do something like the following in the SMMU driver when attaching
a PCI device:

    id = alloc_stream_id(...);
    pci_set_streamid(pci-dev, id);

    or

    id = pci_get_streamid(pci-dev);

...i.e the PCI RC could allocate (from some TBD
allocator) and set the stream ID itself.

Not sure how big a deal it is to extend PCI RC interfaces for 
something like that.

Stuart
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to