Hi Sachin,
On Thu, Jun 26, 2014 at 11:09 AM, Sachin Kamat <sachin.ka...@samsung.com> wrote: > EHCI and OHCI drivers on Exynos platforms do not work without their > corresponding SoC specific phy drivers. Hence it makes no sense to > keep these phy drivers as user selectable. Instead select them from > the respective USB configs to make things easier for the end user. > While at it enable 5250 phy for Exynos 5420 SoC too. > > Signed-off-by: Sachin Kamat <sachin.ka...@samsung.com> > Cc: Kishon Vijay Abraham I <kis...@ti.com> > --- > drivers/phy/Kconfig | 37 +++++++------------------------------ > drivers/usb/host/Kconfig | 10 ++++++---- > 2 files changed, 13 insertions(+), 34 deletions(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 16a2f067c242..7fe7ef5f1322 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -121,44 +121,21 @@ config PHY_SUN4I_USB > parts, as well as the 2 regular USB 2 host PHYs. > > config PHY_SAMSUNG_USB2 > - tristate "Samsung USB 2.0 PHY driver" > + tristate > select GENERIC_PHY > select MFD_SYSCON > - help > - Enable this to support the Samsung USB 2.0 PHY driver for Samsung > - SoCs. This driver provides the interface for USB 2.0 PHY. Support > for > - particular SoCs has to be enabled in addition to this driver. Number > - and type of supported phys depends on the SoC. > + select PHY_EXYNOS4210_USB2 if CPU_EXYNOS4210 > + select PHY_EXYNOS4X12_USB2 if (SOC_EXYNOS4212 || SOC_EXYNOS4412) > + select PHY_EXYNOS5250_USB2 if (SOC_EXYNOS5250 || SOC_EXYNOS5420) also || SOC_EXYNOS5800 same controller present on Exynos5800 too. > > config PHY_EXYNOS4210_USB2 > - bool "Support for Exynos 4210" > - depends on PHY_SAMSUNG_USB2 > - depends on CPU_EXYNOS4210 > - help > - Enable USB PHY support for Exynos 4210. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for > this > - particular SoC is compiled in the driver. In case of Exynos 4210 > four > - phys are available - device, host, HSIC0 and HSIC1. > + bool > > config PHY_EXYNOS4X12_USB2 > - bool "Support for Exynos 4x12" > - depends on PHY_SAMSUNG_USB2 > - depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) > - help > - Enable USB PHY support for Exynos 4x12. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for > this > - particular SoC is compiled in the driver. In case of Exynos 4x12 > four > - phys are available - device, host, HSIC0 and HSIC1. > + bool > > config PHY_EXYNOS5250_USB2 > - bool "Support for Exynos 5250" > - depends on PHY_SAMSUNG_USB2 > - depends on SOC_EXYNOS5250 > - help > - Enable USB PHY support for Exynos 5250. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for > this > - particular SoC is compiled in the driver. In case of Exynos 5250 > four > - phys are available - device, host, HSIC0 and HSIC. > + bool > > config PHY_EXYNOS5_USBDRD > tristate "Exynos5 SoC series USB DRD PHY driver" > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 61b7817bd66b..2938807331de 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -211,10 +211,11 @@ config USB_EHCI_SH > If you use the PCI EHCI controller, this option is not necessary. > > config USB_EHCI_EXYNOS > - tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" > - depends on PLAT_S5P || ARCH_EXYNOS > - help > - Enable support for the Samsung Exynos SOC's on-chip EHCI controller. > + tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" > + depends on PLAT_S5P || ARCH_EXYNOS > + select PHY_SAMSUNG_USB2 if ARCH_EXYNOS > + help > + Enable support for the Samsung Exynos SOC's on-chip EHCI controller. > > config USB_EHCI_MV > bool "EHCI support for Marvell PXA/MMP USB controller" > @@ -520,6 +521,7 @@ config USB_OHCI_SH > config USB_OHCI_EXYNOS > tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" > depends on PLAT_S5P || ARCH_EXYNOS > + select PHY_SAMSUNG_USB2 if ARCH_EXYNOS > help > Enable support for the Samsung Exynos SOC's on-chip OHCI controller. > rest looks fine. -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
