On Thu, 26 Jun 2014, Javier Martinez Canillas wrote: > The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout > (LDO) regulators. This patch adds support for all these regulators > found on the MAX77802 PMIC and is based on a driver added by Simon > Glass to the Chrome OS kernel 3.8 tree. > > Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk> > Tested-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com> > --- > > Changes since v4: None > > Changes since v3: > - Set the supply_name for regulators to lookup their parent supply node. > Suggested by Mark Brown. > - Change Exyno5 for Exynos5420/Exynos5800 in regulator driver Kconfig. > Suggested by Doug Anderson. > > Changes since v2: > - Use dev_warn() instead pr_warn(). Suggested by Mark Brown. > - Add a generic function to regmap core to copy registers instead of > having a driver-specific function. Suggested by Mark Brown. > - Remove unnecessary probe debug log. Suggested by Mark Brown. > - Set struct regulator_config dev field to MFD instead of the platform dev. > Suggested by Mark Brown. > - Read the regulators operational mode from the hardware registers instead > of setting to normal as default on probe. Suggested by Mark Brown. > - Remove unnecessary cross-subsystem dependencies. Suggested by Lee Jones. > > Changes since v1: > - Remove unneeded check if num_regulators != MAX77802_MAX_REGULATORS. > - Fix .set_suspend_mode handler comment and split regulators ops for > regulators that behave differently. Suggested by Mark Brown. > - Use module_platform_driver() instead of having init/exit functions. > Suggested by Mark Brown. > - Use the new descriptor-based GPIO interface instead of the deprecated > integer based GPIO one. Suggested by Mark Brown. > - Look for "regulators" child node instead of "voltage-regulators" to be > consistent with other PMIC drivers. Suggested by Mark Brown. > > drivers/mfd/max77802.c | 8 +- > drivers/regulator/Kconfig | 9 + > drivers/regulator/Makefile | 1 + > drivers/regulator/max77802.c | 694 > +++++++++++++++++++++++++++++++++++ > include/linux/mfd/max77802-private.h | 3 - > 5 files changed, 711 insertions(+), 4 deletions(-) > create mode 100644 drivers/regulator/max77802.c > > diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c > index 3d477fb..79d36b6 100644 > --- a/drivers/mfd/max77802.c > +++ b/drivers/mfd/max77802.c > @@ -228,7 +228,7 @@ static int max77802_i2c_probe(struct i2c_client *i2c, > > max77802 = devm_kzalloc(&i2c->dev, sizeof(struct max77802_dev), > GFP_KERNEL); > - if (max77802 == NULL) > + if (!max77802) > return -ENOMEM; > > i2c_set_clientdata(i2c, max77802); > @@ -315,6 +315,12 @@ static int max77802_suspend(struct device *dev) > if (device_may_wakeup(dev)) > enable_irq_wake(max77802->irq); > > + /* > + * The IRQ must be disabled during suspend since due wakeup > + * ordering issues it may be possible that the I2C controller > + * is still suspended when the interrupt happens so the IRQ > + * handler will fail to read the I2C bus. > + */
Please re-word this, the English is a little off. > disable_irq(max77802->irq); > > return 0; Please separate the MFD changes out. There is no need for them to be munged in with regulator changes. [...] -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
