Use clk_prepare_enable/clk_disable_unprepare to make the driver work properly with common clock framework.
Signed-off-by: Vasily Khoruzhick <[email protected]> --- arch/arm/plat-samsung/adc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 79690f2..c5831b49 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -389,7 +389,7 @@ static int s3c_adc_probe(struct platform_device *pdev) if (ret) return ret; - clk_enable(adc->clk); + clk_prepare_enable(adc->clk); tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; @@ -413,7 +413,7 @@ static int s3c_adc_remove(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - clk_disable(adc->clk); + clk_disable_unprepare(adc->clk); regulator_disable(adc->vdd); return 0; @@ -436,7 +436,7 @@ static int s3c_adc_suspend(struct device *dev) disable_irq(adc->irq); spin_unlock_irqrestore(&adc->lock, flags); - clk_disable(adc->clk); + clk_disable_unprepare(adc->clk); regulator_disable(adc->vdd); return 0; @@ -454,7 +454,7 @@ static int s3c_adc_resume(struct device *dev) ret = regulator_enable(adc->vdd); if (ret) return ret; - clk_enable(adc->clk); + clk_prepare_enable(adc->clk); enable_irq(adc->irq); tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
