On Friday 04 July 2014 19:48:18 Tomasz Figa wrote:
> After refactoring suspend/resume, which was last part with dependencies
> on legacy code, all Kconfig symbols related to Samsung ATAGS support can
> be deselected and more unused code removed. This includes most of s5p-*
> code as well, as s5pv210 was their last user.
>
> Signed-off-by: Tomasz Figa <t.f...@samsung.com>
I actually found a few more, see patch below. Feel free to merge it
into yours.
As discussed on IRC, I have also done an experimental patch to move
the few contents of mach-s5pv210 into mach-exynos, which turned out
very simple and should be uncontroversial but needs more testing.
Finally, there is some more cleanup potential in moving things out
of plat-samsung into the individual platforms (s3c24xx, s3c64xx,
exynos including s5pv210), as a lot of files are now only used
on one of them.
I tried moving everything that the combined mach-exynos needs out
of plat-samsung, but that resulted in about 500-600 lines of duplication
between s3c and exynos for pm-common.c, pm-common.h, pmdebug.c
and pm-check.c, so those four files should probably remain shared
for now.
Arnd
commit c0157e3dcf12f9e5d6c41e143bd9ba2bb3fe406a
Author: Arnd Bergmann <a...@arndb.de>
Date: Fri Jul 4 21:10:39 2014 +0200
ARM: samsung: remove unused device definitions
After the s5p platforms have all been deleted or turned into
DT-only platforms, a lot of device definitions are now completely
unused and can be removed.
Signed-off-by: Arnd Bergmann <a...@arndb.de>
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 0eee25d..14bddde 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -55,22 +55,6 @@ config SAMSUNG_ATAGS
if SAMSUNG_ATAGS
-config SAMSUNG_GPIO_EXTRA
- int "Number of additional GPIO pins"
- default 128 if SAMSUNG_GPIO_EXTRA128
- default 64 if SAMSUNG_GPIO_EXTRA64
- default 0
- help
- Use additional GPIO space in addition to the GPIO's the SOC
- provides. This allows expanding the GPIO space for use with
- GPIO expanders.
-
-config SAMSUNG_GPIO_EXTRA64
- bool
-
-config SAMSUNG_GPIO_EXTRA128
- bool
-
config S3C_GPIO_SPACE
int "Space between gpio banks"
default 0
@@ -112,11 +96,6 @@ config S3C_DEV_HSMMC2
help
Compile in platform device definitions for HSMMC channel 2
-config S3C_DEV_HSMMC3
- bool
- help
- Compile in platform device definitions for HSMMC channel 3
-
config S3C_DEV_HWMON
bool
help
@@ -127,36 +106,6 @@ config S3C_DEV_I2C1
help
Compile in platform device definitions for I2C channel 1
-config S3C_DEV_I2C2
- bool
- help
- Compile in platform device definitions for I2C channel 2
-
-config S3C_DEV_I2C3
- bool
- help
- Compile in platform device definition for I2C controller 3
-
-config S3C_DEV_I2C4
- bool
- help
- Compile in platform device definition for I2C controller 4
-
-config S3C_DEV_I2C5
- bool
- help
- Compile in platform device definition for I2C controller 5
-
-config S3C_DEV_I2C6
- bool
- help
- Compile in platform device definition for I2C controller 6
-
-config S3C_DEV_I2C7
- bool
- help
- Compile in platform device definition for I2C controller 7
-
config S3C_DEV_FB
bool
help
@@ -272,7 +221,7 @@ config SAMSUNG_PM_GPIO
config SAMSUNG_DMADEV
bool "Use legacy Samsung DMA abstraction"
- depends on CPU_S5PV210 || ARCH_S3C64XX
+ depends on ARCH_S3C64XX
select DMADEVICES
default y
help
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 83c7d15..319c547 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -282,36 +282,6 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
}
#endif /* CONFIG_S3C_DEV_HSMMC2 */
-#ifdef CONFIG_S3C_DEV_HSMMC3
-static struct resource s3c_hsmmc3_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
- .max_width = 4,
- .host_caps = (MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-};
-
-struct platform_device s3c_device_hsmmc3 = {
- .name = "s3c-sdhci",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
- .resource = s3c_hsmmc3_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c_hsmmc3_def_platdata,
- },
-};
-
-void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
-{
- s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC3 */
-
/* I2C */
static struct resource s3c_i2c0_resource[] = {
@@ -379,186 +349,6 @@ void __init s3c_i2c1_set_platdata(struct
s3c2410_platform_i2c *pd)
}
#endif /* CONFIG_S3C_DEV_I2C1 */
-#ifdef CONFIG_S3C_DEV_I2C2
-static struct resource s3c_i2c2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC2),
-};
-
-struct platform_device s3c_device_i2c2 = {
- .name = "s3c2410-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_i2c2_resource),
- .resource = s3c_i2c2_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 2;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c2);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C2 */
-
-#ifdef CONFIG_S3C_DEV_I2C3
-static struct resource s3c_i2c3_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC3),
-};
-
-struct platform_device s3c_device_i2c3 = {
- .name = "s3c2440-i2c",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_i2c3_resource),
- .resource = s3c_i2c3_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 3;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c3);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C3 */
-
-#ifdef CONFIG_S3C_DEV_I2C4
-static struct resource s3c_i2c4_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC4),
-};
-
-struct platform_device s3c_device_i2c4 = {
- .name = "s3c2440-i2c",
- .id = 4,
- .num_resources = ARRAY_SIZE(s3c_i2c4_resource),
- .resource = s3c_i2c4_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 4;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c4);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C4 */
-
-#ifdef CONFIG_S3C_DEV_I2C5
-static struct resource s3c_i2c5_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC5),
-};
-
-struct platform_device s3c_device_i2c5 = {
- .name = "s3c2440-i2c",
- .id = 5,
- .num_resources = ARRAY_SIZE(s3c_i2c5_resource),
- .resource = s3c_i2c5_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 5;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c5);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C5 */
-
-#ifdef CONFIG_S3C_DEV_I2C6
-static struct resource s3c_i2c6_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC6),
-};
-
-struct platform_device s3c_device_i2c6 = {
- .name = "s3c2440-i2c",
- .id = 6,
- .num_resources = ARRAY_SIZE(s3c_i2c6_resource),
- .resource = s3c_i2c6_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 6;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c6);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C6 */
-
-#ifdef CONFIG_S3C_DEV_I2C7
-static struct resource s3c_i2c7_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC7),
-};
-
-struct platform_device s3c_device_i2c7 = {
- .name = "s3c2440-i2c",
- .id = 7,
- .num_resources = ARRAY_SIZE(s3c_i2c7_resource),
- .resource = s3c_i2c7_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 7;
- }
-
- npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
- &s3c_device_i2c7);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C7 */
-
/* I2S */
#ifdef CONFIG_PLAT_S3C24XX
@@ -1184,46 +974,3 @@ void __init s3c64xx_spi1_set_platdata(int
(*cfg_gpio)(void), int src_clk_nr,
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
}
#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
- [2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
- [3] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
- .name = "s3c6410-spi",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
- .resource = s3c64xx_spi2_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-#if defined(CONFIG_PL330_DMA)
- pd.filter = pl330_filter;
-#elif defined(CONFIG_S3C64XX_PL080)
- pd.filter = pl08x_filter_id;
-#endif
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h
b/arch/arm/plat-samsung/include/plat/dma-pl330.h
deleted file mode 100644
index abe07fa..0000000
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.b...@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DMA_PL330_H_
-#define __DMA_PL330_H_ __FILE__
-
-/*
- * PL330 can assign any channel to communicate with
- * any of the peripherals attched to the DMAC.
- * For the sake of consistency across client drivers,
- * We keep the channel names unchanged and only add
- * missing peripherals are added.
- * Order is not important since DMA PL330 API driver
- * use these just as IDs.
- */
-enum dma_ch {
- DMACH_UART0_RX = 0,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_UART4_RX,
- DMACH_UART4_TX,
- DMACH_UART5_RX,
- DMACH_UART5_TX,
- DMACH_USI_RX,
- DMACH_USI_TX,
- DMACH_IRDA,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
- DMACH_EXTERNAL,
- DMACH_PWM,
- DMACH_SPDIF,
- DMACH_HSI_RX,
- DMACH_HSI_TX,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_PCM1_TX,
- DMACH_PCM1_RX,
- DMACH_PCM2_TX,
- DMACH_PCM2_RX,
- DMACH_MSM_REQ3,
- DMACH_MSM_REQ2,
- DMACH_MSM_REQ1,
- DMACH_MSM_REQ0,
- DMACH_SLIMBUS0_RX,
- DMACH_SLIMBUS0_TX,
- DMACH_SLIMBUS0AUX_RX,
- DMACH_SLIMBUS0AUX_TX,
- DMACH_SLIMBUS1_RX,
- DMACH_SLIMBUS1_TX,
- DMACH_SLIMBUS2_RX,
- DMACH_SLIMBUS2_TX,
- DMACH_SLIMBUS3_RX,
- DMACH_SLIMBUS3_TX,
- DMACH_SLIMBUS4_RX,
- DMACH_SLIMBUS4_TX,
- DMACH_SLIMBUS5_RX,
- DMACH_SLIMBUS5_TX,
- DMACH_MIPI_HSI0,
- DMACH_MIPI_HSI1,
- DMACH_MIPI_HSI2,
- DMACH_MIPI_HSI3,
- DMACH_MIPI_HSI4,
- DMACH_MIPI_HSI5,
- DMACH_MIPI_HSI6,
- DMACH_MIPI_HSI7,
- DMACH_DISP1,
- DMACH_MTOM_0,
- DMACH_MTOM_1,
- DMACH_MTOM_2,
- DMACH_MTOM_3,
- DMACH_MTOM_4,
- DMACH_MTOM_5,
- DMACH_MTOM_6,
- DMACH_MTOM_7,
- /* END Marker, also used to denote a reserved channel */
- DMACH_MAX,
-};
-
-struct s3c2410_dma_client {
- char *name;
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
- return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
- return true;
-}
-
-#include <plat/dma-ops.h>
-
-#endif /* __DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/keypad-core.h
b/arch/arm/plat-samsung/include/plat/keypad-core.h
deleted file mode 100644
index d513e1b..0000000
--- a/arch/arm/plat-samsung/include/plat/keypad-core.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.s...@samsung.com>
- *
- * Samsung keypad controller core function
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_KEYPAD_CORE_H
-#define __ASM_ARCH_KEYPAD_CORE_H
-
-/* These function are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void samsung_keypad_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
- samsung_device_keypad.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_KEYPAD_CORE_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
