Hi Sonny,

I have missed this patch.

You finally choose to take extra interrupt handling.
If it is not harm, it's fine.

Please check one thing below.

On Tue, June 10, 2014, Sonny Rao wrote:
> This patch changes the fifo reset code to follow the reset procedure
> outlined in the documentation of Synopsys Mobile storage host databook.
> 
> Signed-off-by: Sonny Rao <sonny...@chromium.org>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj...@samsung.com>
> ---
> v2: Add Generic DMA support
>     per the documentation, move interrupt clear before wait
>     make the test for DMA host->use_dma rather than host->using_dma
>     add proper return values (although it appears no caller checks)
> v3: rename fifo reset function, and change callers
>     use this combined reset function in dw_mci_resume()
>     just one caller left (probe), so get rid of dw_mci_ctrl_all_reset()
>     use DMA reset bit for all systems which use DMA
>     remove extra IDMAC reset in dw_mci_work_routine_card()
>     do CIU clock update in error path, if CIU reset cleared
> v4: remove comment about FIFO reset in dw_mci_work_routine_card()
>     move down error message when control reset clears but others don't
>      and clarify the error stating that we will still update clocks
>     make flags for all reset bits a macro
> 
>  drivers/mmc/host/dw_mmc.c | 86 
> ++++++++++++++++++++++++++++++++++-------------
>  drivers/mmc/host/dw_mmc.h |  5 +++
>  2 files changed, 68 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 55cd110..1d6d984 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -111,8 +111,7 @@ static const u8 tuning_blk_pattern_8bit[] = {
>       0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
>  };
> 
> -static inline bool dw_mci_fifo_reset(struct dw_mci *host);
> -static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host);
> +static inline bool dw_mci_reset(struct dw_mci *host);
> 
>  #if defined(CONFIG_DEBUG_FS)
>  static int dw_mci_req_show(struct seq_file *s, void *v)
> @@ -1254,7 +1253,7 @@ static int dw_mci_data_complete(struct dw_mci *host, 
> struct mmc_data *data)
>                * After an error, there may be data lingering
>                * in the FIFO
>                */
> -             dw_mci_fifo_reset(host);
> +             dw_mci_reset(host);
>       } else {
>               data->bytes_xfered = data->blocks * data->blksz;
>               data->error = 0;
> @@ -1371,7 +1370,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
> 
>                       /* CMD error in data command */
>                       if (mrq->cmd->error && mrq->data)
> -                             dw_mci_fifo_reset(host);
> +                             dw_mci_reset(host);
> 
>                       host->cmd = NULL;
>                       host->data = NULL;
> @@ -1982,14 +1981,8 @@ static void dw_mci_work_routine_card(struct 
> work_struct *work)
>                       }
> 
>                       /* Power down slot */
> -                     if (present == 0) {
> -                             /* Clear down the FIFO */
> -                             dw_mci_fifo_reset(host);
> -#ifdef CONFIG_MMC_DW_IDMAC
> -                             dw_mci_idmac_reset(host);
> -#endif
> -
> -                     }
> +                     if (present == 0)
> +                             dw_mci_reset(host);
> 
>                       spin_unlock_bh(&host->lock);
> 
> @@ -2323,8 +2316,11 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 
> reset)
>       return false;
>  }
> 
> -static inline bool dw_mci_fifo_reset(struct dw_mci *host)
> +static inline bool dw_mci_reset(struct dw_mci *host)
>  {
> +     u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
> +     bool ret = false;
> +
>       /*
>        * Reseting generates a block interrupt, hence setting
>        * the scatter-gather pointer to NULL.
> @@ -2334,15 +2330,59 @@ static inline bool dw_mci_fifo_reset(struct dw_mci 
> *host)
>               host->sg = NULL;
>       }
> 
> -     return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
> -}
> +     if (host->use_dma)
> +             flags |= SDMMC_CTRL_DMA_RESET;
> 
> -static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host)
> -{
> -     return dw_mci_ctrl_reset(host,
> -                              SDMMC_CTRL_FIFO_RESET |
> -                              SDMMC_CTRL_RESET |
> -                              SDMMC_CTRL_DMA_RESET);
> +     if (dw_mci_ctrl_reset(host, flags)) {
> +             /*
> +              * In all cases we clear the RAWINTS register to clear any
> +              * interrupts.
> +              */
> +             mci_writel(host, RINTSTS, 0xFFFFFFFF);
> +
> +             /* if using dma we wait for dma_req to clear */
> +             if (host->use_dma) {
> +                     unsigned long timeout = jiffies + msecs_to_jiffies(500);
> +                     u32 status;
> +                     do {
> +                             status = mci_readl(host, STATUS);
> +                             if (!(status & SDMMC_STATUS_DMA_REQ))
> +                                     break;
> +                             cpu_relax();
> +                     } while (time_before(jiffies, timeout));
> +
> +                     if (status & SDMMC_STATUS_DMA_REQ) {
> +                             dev_err(host->dev,
> +                                     "%s: Timeout waiting for dma_req to "
> +                                     "clear during reset", __func__);
> +                             goto ciu_out;
> +                     }
> +
> +                     /* when using DMA next we reset the fifo again */
> +                     if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
> +                             goto ciu_out;
> +             }
> +     } else {
> +             /* if the controller reset bit did clear, then set clock regs */
> +             if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
> +                     dev_err(host->dev, "%s: fifo/dma reset bits didn't "
> +                             "clear but ciu was reset, doing clock update.",
> +                             __func__);
> +                     goto ciu_out;
> +             }
> +     }
> +
> +     if (IS_ENABLED(CONFIG_MMC_DW_IDMAC))
> +             /* It is also recommended that we reset and reprogram idmac */
> +             dw_mci_idmac_reset(host);
> +
> +     ret = true;
> +
> +ciu_out:
> +     /* After a CTRL reset we need to have CIU set clock registers  */
> +     mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
> +
> +     return ret;
>  }
> 
>  #ifdef CONFIG_OF
> @@ -2555,7 +2595,7 @@ int dw_mci_probe(struct dw_mci *host)
>       }
> 
>       /* Reset all blocks */
> -     if (!dw_mci_ctrl_all_reset(host))
> +     if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS))
>               return -ENODEV;
> 
>       host->dma_ops = host->pdata->dma_ops;
> @@ -2744,7 +2784,7 @@ int dw_mci_resume(struct dw_mci *host)
>               }
>       }
> 
> -     if (!dw_mci_ctrl_all_reset(host)) {
> +     if (!dw_mci_reset(host)) {
Do you have any reason to use dw_mci_reset() unlike doing on probing?

Thanks,
Seungwon Jeon

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to