Am 26.08.2014 09:30, schrieb Sjoerd Simons: > In case the optional dr_mode property isn't set in the dwc3 nodes the > the controller will go into OTG mode iff both USB host and USB gadget > functionality are enabled in the kernel configuration. Unfortunately this > results in USB not working on exynos5420-peach-pit and > exynos5800-peach-pi with such a kernel configuration unless manually > change the mode. To resolve that explicitely configure the dual role
"explicitly" > mode as host > > Signed-off-by: Sjoerd Simons <[email protected]> > --- > Changes in v2: alphabetically sort the dts entries > > arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 ++++++++ > arch/arm/boot/dts/exynos5420.dtsi | 4 ++-- > arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 ++++++++ > 3 files changed, 18 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts > b/arch/arm/boot/dts/exynos5420-peach-pit.dts > index 228a6b1..29d3a59 100644 > --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts > +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts > @@ -427,6 +427,14 @@ > status = "okay"; > }; > > +&usbdrd_dwc3_0 { > + dr_mode = "host"; > +}; > + > +&usbdrd_dwc3_1 { > + dr_mode = "host"; > +}; > + > &usbdrd_phy0 { > vbus-supply = <&usb300_vbus_reg>; > }; > diff --git a/arch/arm/boot/dts/exynos5420.dtsi > b/arch/arm/boot/dts/exynos5420.dtsi > index bfe056d..8617a03 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -815,7 +815,7 @@ > #size-cells = <1>; > ranges; > > - dwc3 { > + usbdrd_dwc3_0: dwc3 { > compatible = "snps,dwc3"; > reg = <0x12000000 0x10000>; > interrupts = <0 72 0>; > @@ -841,7 +841,7 @@ > #size-cells = <1>; > ranges; > > - dwc3 { > + usbdrd_dwc3_1: dwc3 { > compatible = "snps,dwc3"; > reg = <0x12400000 0x10000>; > interrupts = <0 73 0>; > diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts > b/arch/arm/boot/dts/exynos5800-peach-pi.dts > index f3ee48b..2064550 100644 > --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts > +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts > @@ -425,6 +425,14 @@ > status = "okay"; > }; > > +&usbdrd_dwc3_0 { > + dr_mode = "host"; > +}; > + > +&usbdrd_dwc3_1 { > + dr_mode = "host"; > +}; > + > &usbdrd_phy0 { > vbus-supply = <&usb300_vbus_reg>; > }; Thanks, Reviewed-by: Andreas Färber <[email protected]> Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
