On Wed, Oct 15, 2014 at 07:35:20AM +0100, Chander Kashyap wrote:
> Exynos7 has core power down state where cores can be powered off 
> independently.
> This patch adds support for this state.

Please tell us more about the idle-state values you are adding, in particular
entry, exit latencies and min-residency values.

> Signed-off-by: Chander Kashyap <k.chan...@samsung.com>
> ---
> This patch has following dependencies:
>       - [PATCH v5 0/8] arch: arm64: Enable support for Samsung Exynos7 SoC
>               http://www.spinics.net/lists/linux-samsung-soc/msg37047.html
>       - [PATCH v9 0/8] ARM generic idle states
>               
> http://permalink.gmane.org/gmane.linux.power-management.general/49224

Series above was merged, so dependency is stale.

>  arch/arm64/boot/dts/exynos/exynos7.dtsi |   18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi 
> b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index ce221ac..8e0a034 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -36,6 +36,7 @@
>                       device_type = "cpu";
>                       compatible = "arm,cortex-a57", "arm,armv8";
>                       enable-method = "psci";
> +                     cpu-idle-states = <&CPU_SLEEP>;

I would add cpu-idle-states phandle after the reg property, as defined
in the idle states bindings.

>                       reg = <0x0>;
>               };
>  
> @@ -43,6 +44,7 @@
>                       device_type = "cpu";
>                       compatible = "arm,cortex-a57", "arm,armv8";
>                       enable-method = "psci";
> +                     cpu-idle-states = <&CPU_SLEEP>;
>                       reg = <0x1>;
>               };
>  
> @@ -50,6 +52,7 @@
>                       device_type = "cpu";
>                       compatible = "arm,cortex-a57", "arm,armv8";
>                       enable-method = "psci";
> +                     cpu-idle-states = <&CPU_SLEEP>;
>                       reg = <0x2>;
>               };
>  
> @@ -57,8 +60,23 @@
>                       device_type = "cpu";
>                       compatible = "arm,cortex-a57", "arm,armv8";
>                       enable-method = "psci";
> +                     cpu-idle-states = <&CPU_SLEEP>;
>                       reg = <0x3>;
>               };
> +
> +             idle-states {
> +                     entry-method = "arm,psci";
> +
> +                     CPU_SLEEP: cpu-sleep {
> +                             compatible = "arm,idle-state";
> +                             local-timer-stop;
> +                             arm,psci-suspend-param = <0x0010000>;
> +                             entry-latency-us = <20>;
> +                             exit-latency-us = <150>;
> +                             min-residency-us = <2100>;
> +                             status = "enabled";

status ? This is not a documented property. If you need it please explain
why, define its bindings and we can see how to accommodate it.

Thank you,
Lorenzo

> +                     };
> +             };
>       };
>  
>       psci {
> -- 
> 1.7.9.5
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to