From: Kiran AVND <avnd.ki...@samsung.com>
Reset sequence for MFC V7 and V8 do not need RISC_ON
to be set to 0, while for MFC V6 it is still needed.
Also, remove a couple of register settings during Reset
which are not needed from V6 onwards.
Signed-off-by: Kiran AVND <avnd.ki...@samsung.com>
Signed-off-by: Arun Kumar K <arun...@samsung.com>
---
drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 1 +
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 25 ++++++++++++++---------
2 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
index 3e41ca1..5b0c334 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -340,6 +340,7 @@ struct s5p_mfc_dev {
struct s5p_mfc_hw_cmds *mfc_cmds;
const struct s5p_mfc_regs *mfc_regs;
enum s5p_mfc_fw_ver fw_ver;
+ bool risc_on; /* indicates if RISC is on or off */
};
/**
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index 0c885a8..f5bb6b2 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -139,12 +139,6 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev)
mfc_debug_enter();
if (IS_MFCV6_PLUS(dev)) {
- /* Reset IP */
- /* except RISC, reset */
- mfc_write(dev, 0xFEE, S5P_FIMV_MFC_RESET_V6);
- /* reset release */
- mfc_write(dev, 0x0, S5P_FIMV_MFC_RESET_V6);
-
/* Zero Initialization of MFC registers */
mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD_V6);
mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD_V6);
@@ -153,8 +147,13 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev)
for (i = 0; i < S5P_FIMV_REG_CLEAR_COUNT_V6; i++)
mfc_write(dev, 0, S5P_FIMV_REG_CLEAR_BEGIN_V6 + (i*4));
- /* Reset */
- mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
+ /* Reset
+ * set RISC_ON to 0 during power_on & wake_up.
+ * V6 needs RISC_ON set to 0 during reset also.
+ */
+ if ((!dev->risc_on) || (!IS_MFCV7(dev)))
+ mfc_write(dev, 0, S5P_FIMV_RISC_ON_V6);
+
mfc_write(dev, 0x1FFF, S5P_FIMV_MFC_RESET_V6);
mfc_write(dev, 0, S5P_FIMV_MFC_RESET_V6);
} else {
@@ -226,6 +225,7 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
/* 0. MFC reset */
mfc_debug(2, "MFC reset..\n");
s5p_mfc_clock_on();
+ dev->risc_on = 0;
ret = s5p_mfc_reset(dev);
if (ret) {
mfc_err("Failed to reset MFC - timeout\n");
@@ -238,8 +238,10 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
s5p_mfc_clear_cmds(dev);
/* 3. Release reset signal to the RISC */
s5p_mfc_clean_dev_int_flags(dev);
- if (IS_MFCV6_PLUS(dev))
+ if (IS_MFCV6_PLUS(dev)) {
+ dev->risc_on = 1;
mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+ }
else
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
mfc_debug(2, "Will now wait for completion of firmware transfer\n");
@@ -336,6 +338,7 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
/* 0. MFC reset */
mfc_debug(2, "MFC reset..\n");
s5p_mfc_clock_on();
+ dev->risc_on = 0;
ret = s5p_mfc_reset(dev);
if (ret) {
mfc_err("Failed to reset MFC - timeout\n");
@@ -354,8 +357,10 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
return ret;
}
/* 4. Release reset signal to the RISC */
- if (IS_MFCV6_PLUS(dev))
+ if (IS_MFCV6_PLUS(dev)) {
+ dev->risc_on = 1;
mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+ }
else
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
