>From 6b429d8fd28c6ebd6600a120ccba5cafd6bd07e4 Mon Sep 17 00:00:00 2001 Message-Id: <6b429d8fd28c6ebd6600a120ccba5cafd6bd07e4.1416158605.git.juer...@kreuzholzen.de> In-Reply-To: <[email protected]> References: <[email protected]> From: Juergen Borleis <[email protected]> Date: Sat, 15 Nov 2014 16:06:26 +0100 Subject: [PATCH 8/8] ARM/Mini6410: enable USB OHCI support To: [email protected] Cc: [email protected]
All required drivers are now in place. Make use of them. Signed-off-by: Juergen Borleis <[email protected]> --- arch/arm/boot/dts/s3c6410-mini6410.dts | 50 ++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 1e196ca..ab606d9 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -30,6 +30,42 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_regs>; + + votg: fixed-regulator@6 { + /* U6 is of type XC6219B331MR = 3.3 V */ + /* digital power for the USB OTG phy */ + compatible = "regulator-fixed"; + regulator-name = "vddotg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * Both 'vddotg' and 'vddotgi' are controlled via GPIO GPF13 + * We cannot forward the same GPIO pin twice, so let the lower + * voltage regulator looks like it uses the voltage from the + * other regulator. + */ + votgi: fixed-regulator@7 { + /* U7 is of type XC6219B121MR = 1.2 V */ + /* analog power for the USB OTG phy */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio_regs>; + compatible = "regulator-fixed"; + regulator-name = "vddotgi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpf 13 GPIO_ACTIVE_HIGH>; /* active if GPF13 is high */ + enable-active-high; + }; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -213,6 +249,11 @@ "gpn-4", "gpn-5", "gpl-11", "gpl-12"; samsung,pin-pud = <PIN_PULL_NONE>; }; + + gpio_regs: gpio-regs { + samsung,pins = "gpf-13"; + samsung,pin-pud = <PIN_PULL_NONE>; + }; }; &i2c0 { @@ -234,3 +275,12 @@ &rtc { status = "okay"; }; + +&usbphy { + status = "okay"; + analog-supply = <&votgi>; /* analog power supply */ +}; + +&usbhost { + status = "okay"; +}; -- 1.8.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
