For the I80 interface, the video interrupt pending register(VIDINTCON1) should be handled in fimd_irq_handler() and the video interrupt control register(VIDINTCON0) should be handled in fimd_enable_vblank() and fimd_disable_vblank() like RGB interface. So this patch moves each set / unset routines into proper positions.
Signed-off-by: YoungJun Cho <[email protected]> Acked-by: Inki Dae <[email protected]> Acked-by: Kyungmin Park <[email protected]> --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 53 ++++++++++++++++---------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index fd7b469..3c63237 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -469,12 +469,19 @@ static int fimd_enable_vblank(struct exynos_drm_manager *mgr) val = readl(ctx->regs + VIDINTCON0); val |= VIDINTCON0_INT_ENABLE; - val |= VIDINTCON0_INT_FRAME; - val &= ~VIDINTCON0_FRAMESEL0_MASK; - val |= VIDINTCON0_FRAMESEL0_VSYNC; - val &= ~VIDINTCON0_FRAMESEL1_MASK; - val |= VIDINTCON0_FRAMESEL1_NONE; + if (ctx->i80_if) { + val |= VIDINTCON0_INT_I80IFDONE; + val |= VIDINTCON0_INT_SYSMAINCON; + val &= ~VIDINTCON0_INT_SYSSUBCON; + } else { + val |= VIDINTCON0_INT_FRAME; + + val &= ~VIDINTCON0_FRAMESEL0_MASK; + val |= VIDINTCON0_FRAMESEL0_VSYNC; + val &= ~VIDINTCON0_FRAMESEL1_MASK; + val |= VIDINTCON0_FRAMESEL1_NONE; + } writel(val, ctx->regs + VIDINTCON0); } @@ -493,9 +500,15 @@ static void fimd_disable_vblank(struct exynos_drm_manager *mgr) if (test_and_clear_bit(0, &ctx->irq_flags)) { val = readl(ctx->regs + VIDINTCON0); - val &= ~VIDINTCON0_INT_FRAME; val &= ~VIDINTCON0_INT_ENABLE; + if (ctx->i80_if) { + val &= ~VIDINTCON0_INT_I80IFDONE; + val &= ~VIDINTCON0_INT_SYSMAINCON; + val &= ~VIDINTCON0_INT_SYSSUBCON; + } else + val &= ~VIDINTCON0_INT_FRAME; + writel(val, ctx->regs + VIDINTCON0); } } @@ -959,19 +972,15 @@ static void fimd_trigger(struct device *dev) u32 reg; /* - * Skips to trigger if in triggering state, because multiple triggering - * requests can cause panel reset. - */ + * Skips triggering if in triggering state, because multiple triggering + * requests can cause panel reset. + */ if (atomic_read(&ctx->triggering)) return; + /* Enters triggering mode */ atomic_set(&ctx->triggering, 1); - reg = readl(ctx->regs + VIDINTCON0); - reg |= (VIDINTCON0_INT_ENABLE | VIDINTCON0_INT_I80IFDONE | - VIDINTCON0_INT_SYSMAINCON); - writel(reg, ctx->regs + VIDINTCON0); - reg = readl(timing_base + TRIGCON); reg |= (TRGMODE_I80_RGB_ENABLE_I80 | SWTRGCMD_I80_RGB_ENABLE); writel(reg, timing_base + TRIGCON); @@ -1036,21 +1045,13 @@ static irqreturn_t fimd_irq_handler(int irq, void *dev_id) if (ctx->pipe < 0 || !ctx->drm_dev) goto out; - if (ctx->i80_if) { - /* unset I80 frame done interrupt */ - val = readl(ctx->regs + VIDINTCON0); - val &= ~(VIDINTCON0_INT_I80IFDONE | VIDINTCON0_INT_SYSMAINCON); - writel(val, ctx->regs + VIDINTCON0); + drm_handle_vblank(ctx->drm_dev, ctx->pipe); + exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe); - /* exit triggering mode */ + if (ctx->i80_if) { + /* Exits triggering mode */ atomic_set(&ctx->triggering, 0); - - drm_handle_vblank(ctx->drm_dev, ctx->pipe); - exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe); } else { - drm_handle_vblank(ctx->drm_dev, ctx->pipe); - exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe); - /* set wait vsync event to zero and wake up queue. */ if (atomic_read(&ctx->wait_vsync_event)) { atomic_set(&ctx->wait_vsync_event, 0); -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
