On Thu, Oct 30, 2014 at 01:34:29PM +0530, Pankaj Dubey wrote: > Let's handle i2c interrupt re-configuration in i2c driver. This will > help us in removing some soc specific checks from machine files and > will help in removing static iomapping of SYS register in exynos.c > > Since only Exynos5250, and Exynos5420 has i2c nodes in DT, added syscon > based phandle to i2c device nodes of respective SoC DT files. > > Also handle saving and restoring of SYS_I2C_CFG register during > suspend and resume of i2c driver. > > CC: Rob Herring <[email protected]> > CC: Randy Dunlap <[email protected]> > CC: Wolfram Sang <[email protected]> > CC: Russell King <[email protected]> > CC: [email protected] > CC: [email protected] > CC: [email protected] > Signed-off-by: Pankaj Dubey <[email protected]> > --- > .../devicetree/bindings/i2c/i2c-s3c2410.txt | 1 + > arch/arm/boot/dts/exynos5250.dtsi | 4 +++ > arch/arm/boot/dts/exynos5420.dtsi | 4 +++
I usually don't take DTS patches. They should go via arm-soc. Please say
so if there are reasons I should take them.
> @@ -1084,6 +1092,23 @@ s3c24xx_i2c_parse_dt(struct device_node *np, struct
> s3c24xx_i2c *i2c)
> of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
> of_property_read_u32(np, "samsung,i2c-max-bus-freq",
> (u32 *)&pdata->frequency);
> + /*
> + * Exynos5's legacy i2c controller and new high speed i2c
> + * controller have muxed interrupt sources. By default the
> + * interrupts for 4-channel HS-I2C controller are enabled.
> + * If node for first four channels of legacy i2c controller
s/node/nodes/
> + * are available then re-configure the interrupts via the
> + * system register.
> + */
> + id = of_alias_get_id(np, "i2c");
> + i2c->sysreg = syscon_regmap_lookup_by_phandle(np,
> + "samsung,sysreg-phandle");
> + if (IS_ERR(i2c->sysreg)) {
> + /* As this is not compulsory do not return error */
> + pr_info("i2c-%d skipping re-configuration of interrutps\n", id);
I'd say drop this message. If you want to keep it, it should be dev_dbg.
> + return;
> + }
> + regmap_update_bits(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, BIT(id), 0);
> }
Rest looks good, thanks!
signature.asc
Description: Digital signature
