Hi Sylwester,
On 11/27/2014 09:12 PM, Sylwester Nawrocki wrote:
> Hi,
>
> On 27/11/14 12:56, Chanwoo Choi wrote:
>> On 11/27/2014 08:41 PM, Arnd Bergmann wrote:
>>>> On Thursday 27 November 2014 16:35:08 Chanwoo Choi wrote:
>>>>>> + - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
>>>>>> + and "samsung,exynos5433-cmu-bus2" - clock controller compatible for
>>>>>> CMU_BUS
>>>>>> + which generates global data buses clock and global peripheral buses
>>>>>> clock.
>>>>>>
>>>>>> - reg: physical base address of the controller and length of memory
>>>>>> mapped
>>>>>> region.
>>>>>>
>>>>
>>>> This looks like you are duplicating the bindings and the code, but
>>>> it's really the same hardware multiple times with minor variations
>>>> that you should be able to describe properly here. Why not make
>>>> three nodes with the same compatible string and have them handled
>>>> by the same code?
>>
>> Each CMU_BUSx domain of Exynos5433 have different base address as following:
>> - CMU_BUS0's base address and range : 0x1360_0000 ~ 0x1360_0b04
>> - CMU_BUS1's base address and range : 0x1480_0000 ~ 0x1480_0b04
>> - CMU_BUS2's base address and range : 0x1340_0000 ~ 0x1340_0b04
>>
>> So, I implement CMU_BUSx domain which has each compatible string.
>
> You can always have multiple entries in the reg property. I've done
> something like this for the exynos4415 CMU_ISPx units:
>
> cmu_isp: clock-controller@12060000 {
> compatible = "samsung,exynos4415-cmu-isp";
> reg = <0x12060000 0xB10>, <0x12070000 0xB10>;
> #clock-cells = <1>;
>
> assigned-clocks = <&cmu CLK_FOUT_ISP_PLL>;
> assigned-clock-rates = <300000000>;
> };
Thanks for your guide.
I'll re-implment CMU_BUSx domain according to your guide.
Best Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
