On 2015-05-22 11:12, Joonyoung Shim wrote:
On 05/06/2015 10:36 PM, Tobias Jakobi wrote:
First step in allowing a more generic way to setup complex
blending for the different layers.
Signed-off-by: Tobias Jakobi <[email protected]>
---
drivers/gpu/drm/exynos/exynos_mixer.c | 90
++++++++++++++++++++++++++++++-----
1 file changed, 79 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c
b/drivers/gpu/drm/exynos/exynos_mixer.c
index 4a1656b..e4a5e76 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -63,6 +63,11 @@ struct mixer_resources {
struct clk *mout_mixer;
};
+struct layer_config {
+ unsigned int index;
+ unsigned int priority;
I think layer index and priority information can go to struct
exynos_drm_plane.
+};
+
enum mixer_version_id {
MXR_VER_0_0_0_16,
MXR_VER_16_0_33_0,
@@ -75,6 +80,8 @@ struct mixer_context {
struct drm_device *drm_dev;
struct exynos_drm_crtc *crtc;
struct exynos_drm_plane planes[MIXER_WIN_NR];
+ const struct layer_config *layer_config;
+ unsigned int num_layer;
int pipe;
bool interlace;
bool powered;
@@ -95,6 +102,40 @@ struct mixer_drv_data {
bool has_sclk;
};
+/*
+ * The default layer priorities. A higher priority means that
+ * the layer is at the top of layer stack.
+ * The current configuration assumes the following usage scenario:
+ * layer1: OSD [top]
+ * layer0: main framebuffer
+ * video layer: video overlay [bottom]
+ * Note that the video layer is only usable when the
+ * video processor is available.
+ */
+
+static const struct layer_config default_layer_config[] = {
+ {
+ .index = 0, /* layer0 */
+ .priority = 1
+ }, {
+ .index = 1, /* layer1 */
+ .priority = 2
+ }
+};
+
+static const struct layer_config vp_layer_config[] = {
+ {
+ .index = 2, /* video layer */
+ .priority = 1
+ }, {
+ .index = 0, /* layer0 */
+ .priority = 2
+ }, {
+ .index = 1, /* layer1 */
+ .priority = 3
+ }
+};
+
I feel there is no reason to split config, actually video layer exists
and video layer isn't enabled if no vp even if we use 3 layer.
Maybe I should add this here. Both default_layer_config and
vp_layer_config function as default layer configurations. My plan is to
expose custom configuration through a exynosdrm module parameter. The
zpos property is immutable, so we can't modify it anymore after mixer
probing (I understand that the immutabilility is a requirement of
atomic). But we still can allow the user to supply his configuraton
through the module parameter approach.
With best wishes,
Tobias
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
