From: Hans Verkuil <hans.verk...@cisco.com>
Add CEC support to the cobalt driver.
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
drivers/media/pci/cobalt/Kconfig | 1 +
drivers/media/pci/cobalt/cobalt-driver.c | 51 ++++++++++++--
drivers/media/pci/cobalt/cobalt-driver.h | 2 +
drivers/media/pci/cobalt/cobalt-irq.c | 3 +
drivers/media/pci/cobalt/cobalt-v4l2.c | 113 +++++++++++++++++++++++++++++--
5 files changed, 159 insertions(+), 11 deletions(-)
diff --git a/drivers/media/pci/cobalt/Kconfig b/drivers/media/pci/cobalt/Kconfig
index 1f88ccc..46483ee 100644
--- a/drivers/media/pci/cobalt/Kconfig
+++ b/drivers/media/pci/cobalt/Kconfig
@@ -4,6 +4,7 @@ config VIDEO_COBALT
depends on PCI_MSI && MTD_COMPLEX_MAPPINGS
depends on GPIOLIB || COMPILE_TEST
depends on SND
+ select CEC
select I2C_ALGOBIT
select VIDEO_ADV7604
select VIDEO_ADV7511
diff --git a/drivers/media/pci/cobalt/cobalt-driver.c
b/drivers/media/pci/cobalt/cobalt-driver.c
index 8fed61e..ed53781 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -76,6 +76,7 @@ static u8 edid[256] = {
0x0A, 0x0A, 0x0A, 0x0A, 0x00, 0x00, 0x00, 0x10,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x68,
+
0x02, 0x03, 0x1a, 0xc0, 0x48, 0xa2, 0x10, 0x04,
0x02, 0x01, 0x21, 0x14, 0x13, 0x23, 0x09, 0x07,
0x07, 0x65, 0x03, 0x0c, 0x00, 0x10, 0x00, 0xe2,
@@ -149,17 +150,58 @@ static void cobalt_notify(struct v4l2_subdev *sd,
struct cobalt *cobalt = to_cobalt(sd->v4l2_dev);
unsigned sd_nr = cobalt_get_sd_nr(sd);
struct cobalt_stream *s = &cobalt->streams[sd_nr];
- bool hotplug = arg ? *((int *)arg) : false;
- if (s->is_output)
+ switch (notification) {
+ case V4L2_SUBDEV_CEC_TX_DONE:
+ cec_transmit_done(s->cec_adap, (unsigned long)arg);
+ return;
+ case V4L2_SUBDEV_CEC_RX_MSG:
+ cec_received_msg(s->cec_adap, arg);
+ return;
+ case V4L2_SUBDEV_CEC_CONN_INPUTS:
+ cec_connected_inputs(s->cec_adap, *(u16 *)arg);
+ return;
+ default:
+ break;
+ }
+
+ if (s->is_output) {
+ switch (notification) {
+ case ADV7511_EDID_DETECT: {
+ struct adv7511_edid_detect *ed = arg;
+
+ s->cec_adap->phys_addr = ed->phys_addr;
+ if (!ed->present) {
+ cec_enable(s->cec_adap, false);
+ break;
+ }
+ cec_enable(s->cec_adap, true);
+ break;
+ }
+ case ADV7511_MONITOR_DETECT: {
+ struct adv7511_monitor_detect *md = arg;
+
+ if (!md->present) {
+ cec_enable(s->cec_adap, false);
+ break;
+ }
+ break;
+ }
+ }
return;
+ }
switch (notification) {
- case ADV76XX_HOTPLUG:
+ case ADV76XX_HOTPLUG: {
+ bool hotplug = arg ? *((int *)arg) : false;
+
cobalt_s_bit_sysctrl(cobalt,
COBALT_SYS_CTRL_HPD_TO_CONNECTOR_BIT(sd_nr), hotplug);
+ if (s->cec_adap)
+ cec_connected_inputs(s->cec_adap, hotplug);
cobalt_dbg(1, "Set hotplug for adv %d to %d\n", sd_nr, hotplug);
break;
+ }
case V4L2_DEVICE_NOTIFY_EVENT:
cobalt_dbg(1, "Format changed for adv %d\n", sd_nr);
v4l2_event_queue(&s->vdev, arg);
@@ -627,8 +669,9 @@ static int cobalt_subdevs_hsma_init(struct cobalt *cobalt)
s->sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev,
s->i2c_adap, &adv7842_info, NULL);
if (s->sd) {
- int err = v4l2_subdev_call(s->sd, pad, set_edid, &cobalt_edid);
+ int err;
+ err = v4l2_subdev_call(s->sd, pad, set_edid, &cobalt_edid);
if (err)
return err;
err = v4l2_subdev_call(s->sd, pad, set_fmt, NULL,
diff --git a/drivers/media/pci/cobalt/cobalt-driver.h
b/drivers/media/pci/cobalt/cobalt-driver.h
index c206df9..55a8c0d 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.h
+++ b/drivers/media/pci/cobalt/cobalt-driver.h
@@ -31,6 +31,7 @@
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <media/cec.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
@@ -221,6 +222,7 @@ struct cobalt_stream {
struct list_head bufs;
struct i2c_adapter *i2c_adap;
struct v4l2_subdev *sd;
+ struct cec_adapter *cec_adap;
struct mutex lock;
spinlock_t irqlock;
struct v4l2_dv_timings timings;
diff --git a/drivers/media/pci/cobalt/cobalt-irq.c
b/drivers/media/pci/cobalt/cobalt-irq.c
index dd4bff9..0963d96 100644
--- a/drivers/media/pci/cobalt/cobalt-irq.c
+++ b/drivers/media/pci/cobalt/cobalt-irq.c
@@ -233,6 +233,9 @@ void cobalt_irq_log_status(struct cobalt *cobalt)
u32 mask;
int i;
+ cobalt_info("irq: edge=%08x mask=%08x\n",
+ cobalt_read_bar1(cobalt, COBALT_SYS_STAT_EDGE),
+ cobalt_read_bar1(cobalt, COBALT_SYS_STAT_MASK));
cobalt_info("irq: adv1=%u adv2=%u advout=%u none=%u full=%u\n",
cobalt->irq_adv1, cobalt->irq_adv2, cobalt->irq_advout,
cobalt->irq_none, cobalt->irq_full_fifo);
diff --git a/drivers/media/pci/cobalt/cobalt-v4l2.c
b/drivers/media/pci/cobalt/cobalt-v4l2.c
index 9756fd3..4417600 100644
--- a/drivers/media/pci/cobalt/cobalt-v4l2.c
+++ b/drivers/media/pci/cobalt/cobalt-v4l2.c
@@ -602,6 +602,7 @@ static int cobalt_log_status(struct file *file, void
*priv_fh)
cobalt_pcie_status_show(cobalt);
cobalt_cpld_status(cobalt);
cobalt_irq_log_status(cobalt);
+ cec_log_status(s->cec_adap);
v4l2_subdev_call(s->sd, core, log_status);
if (!s->is_output) {
cobalt_video_input_status_show(s);
@@ -1161,6 +1162,75 @@ static const struct v4l2_file_operations
cobalt_empty_fops = {
.release = v4l2_fh_release,
};
+static inline struct v4l2_subdev *adap_to_sd(struct cec_adapter *adap)
+{
+ struct cobalt_stream *s = adap->priv;
+
+ return s->sd;
+}
+
+static int cobalt_cec_enable(struct cec_adapter *adap, bool enable)
+{
+ return v4l2_subdev_call(adap_to_sd(adap), video, cec_enable, enable);
+}
+
+static int cobalt_cec_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+ return v4l2_subdev_call(adap_to_sd(adap), video, cec_log_addr,
+ log_addr);
+}
+
+static int cobalt_cec_transmit(struct cec_adapter *adap, u32 timeout_ms,
struct cec_msg *msg)
+{
+ return v4l2_subdev_call(adap_to_sd(adap), video, cec_transmit,
timeout_ms, msg);
+}
+
+static u8 cobalt_cec_cdc_hpd(struct cec_adapter *adap, u8 cdc_hpd_state)
+{
+ switch (cdc_hpd_state) {
+ case CEC_OP_HPD_STATE_EDID_DISABLE:
+ case CEC_OP_HPD_STATE_EDID_ENABLE:
+ case CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE:
+ return CEC_OP_HPD_ERROR_NONE;
+ case CEC_OP_HPD_STATE_CP_EDID_DISABLE:
+ case CEC_OP_HPD_STATE_CP_EDID_ENABLE:
+ case CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE:
+ default:
+ return CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE;
+ }
+}
+
+static int cobalt_sink_initiate_arc(struct cec_adapter *adap)
+{
+ return 0;
+}
+
+static int cobalt_sink_terminate_arc(struct cec_adapter *adap)
+{
+ return 0;
+}
+
+static int cobalt_source_arc_initiated(struct cec_adapter *adap)
+{
+ return 0;
+}
+
+static int cobalt_source_arc_terminated(struct cec_adapter *adap)
+{
+ return 0;
+}
+
+static const struct cec_adap_ops cobalt_cec_adap_ops = {
+ .adap_enable = cobalt_cec_enable,
+ .adap_log_addr = cobalt_cec_log_addr,
+ .adap_transmit = cobalt_cec_transmit,
+ .source_cdc_hpd = cobalt_cec_cdc_hpd,
+ .sink_initiate_arc = cobalt_sink_initiate_arc,
+ .sink_terminate_arc = cobalt_sink_terminate_arc,
+ .source_arc_initiated = cobalt_source_arc_initiated,
+ .source_arc_terminated = cobalt_source_arc_terminated,
+};
+
static int cobalt_node_register(struct cobalt *cobalt, int node)
{
static const struct v4l2_dv_timings dv1080p60 =
@@ -1168,7 +1238,7 @@ static int cobalt_node_register(struct cobalt *cobalt,
int node)
struct cobalt_stream *s = cobalt->streams + node;
struct video_device *vdev = &s->vdev;
struct vb2_queue *q = &s->q;
- int ret;
+ int ret = 0;
mutex_init(&s->lock);
spin_lock_init(&s->irqlock);
@@ -1195,6 +1265,26 @@ static int cobalt_node_register(struct cobalt *cobalt,
int node)
if (!s->is_audio) {
if (s->is_dummy)
cobalt_warn("Setting up dummy video node %d\n", node);
+ if (s->sd) {
+ u32 caps = CEC_CAP_IO | CEC_CAP_LOG_ADDRS |
+ CEC_CAP_PASSTHROUGH | CEC_CAP_RC |
+ CEC_CAP_ARC | CEC_CAP_VENDOR_ID;
+ u8 nsinks = 0;
+
+ if (s->is_output)
+ caps |= CEC_CAP_IS_SOURCE | CEC_CAP_CDC_HPD;
+ else
+ nsinks = 1;
+ s->cec_adap = cec_create_adapter(&cobalt_cec_adap_ops,
+ s, vdev->name, caps, nsinks,
+ THIS_MODULE,
&cobalt->pci_dev->dev);
+ ret = PTR_ERR_OR_ZERO(s->cec_adap);
+ if (ret)
+ return ret;
+ v4l2_subdev_call(s->sd, video, cec_ready);
+ s->cec_adap->available_log_addrs =
+ v4l2_subdev_call(s->sd, video,
cec_available_log_addrs);
+ }
vdev->v4l2_dev = &cobalt->v4l2_dev;
if (s->is_dummy)
vdev->fops = &cobalt_empty_fops;
@@ -1208,8 +1298,11 @@ static int cobalt_node_register(struct cobalt *cobalt,
int node)
vdev->ctrl_handler = s->sd->ctrl_handler;
s->timings = dv1080p60;
v4l2_subdev_call(s->sd, video, s_dv_timings, &s->timings);
- if (!s->is_output && s->sd)
+ if (!s->is_output && s->sd) {
cobalt_enable_input(s);
+ s->cec_adap->phys_addr = 0;
+ ret = cec_enable(s->cec_adap, true);
+ }
vdev->ioctl_ops = s->is_dummy ? &cobalt_ioctl_empty_ops :
&cobalt_ioctl_ops;
}
@@ -1229,16 +1322,20 @@ static int cobalt_node_register(struct cobalt *cobalt,
int node)
vdev->queue = q;
video_set_drvdata(vdev, s);
- ret = vb2_queue_init(q);
+ if (ret == 0)
+ ret = vb2_queue_init(q);
if (!s->is_audio && ret == 0)
ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
- else if (!s->is_dummy)
+ else if (!s->is_dummy && ret == 0)
ret = cobalt_alsa_init(s);
if (ret < 0) {
- if (!s->is_audio)
+ if (!s->is_audio) {
+ if (s->sd)
+ cec_delete_adapter(s->cec_adap);
cobalt_err("couldn't register v4l2 device node %d\n",
node);
+ }
return ret;
}
cobalt_info("registered node %d\n", node);
@@ -1269,9 +1366,11 @@ void cobalt_nodes_unregister(struct cobalt *cobalt)
struct cobalt_stream *s = cobalt->streams + node;
struct video_device *vdev = &s->vdev;
- if (!s->is_audio)
+ if (!s->is_audio) {
video_unregister_device(vdev);
- else if (!s->is_dummy)
+ cec_delete_adapter(s->cec_adap);
+ } else if (!s->is_dummy) {
cobalt_alsa_exit(s);
+ }
}
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
