W dniu 09.10.2015 o 18:39, Wolfram Sang pisze:
> From: Wolfram Sang <wsa+rene...@sang-engineering.com>
>
> The core may register clients attached to this master which may use
> funtionality from the master. So, RuntimePM must be enabled before, otherwise
> this will fail. While here, move drvdata, too.
>
> Signed-off-by: Wolfram Sang <wsa+rene...@sang-engineering.com>
> ---
> drivers/i2c/busses/i2c-s3c2410.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c
> b/drivers/i2c/busses/i2c-s3c2410.c
> index 50bfd8cef5f224..336e34e1ca597d 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -1243,19 +1243,21 @@ static int s3c24xx_i2c_probe(struct platform_device
> *pdev)
> i2c->adap.nr = i2c->pdata->bus_num;
> i2c->adap.dev.of_node = pdev->dev.of_node;
>
> + platform_set_drvdata(pdev, i2c);
> +
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_enable(&i2c->adap.dev);
> +
> ret = i2c_add_numbered_adapter(&i2c->adap);
> if (ret < 0) {
> dev_err(&pdev->dev, "failed to add bus to i2c core\n");
> + pm_runtime_disable(&i2c->adap.dev);
> + pm_runtime_disable(&pdev->dev);
> s3c24xx_i2c_deregister_cpufreq(i2c);
> clk_unprepare(i2c->clk);
> return ret;
> }
>
> - platform_set_drvdata(pdev, i2c);
> -
> - pm_runtime_enable(&pdev->dev);
> - pm_runtime_enable(&i2c->adap.dev);
> -
> dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
> return 0;
> }
>
Hi,
Unfortunately on Odroid XU3, Exynos5420, samsung,s3c2440-i2c,
next-20151009-1-ga93b1a6f5055:
[ 0.437678] s3c-i2c 12c80000.i2c: slave address 0x00
[ 0.437748] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 0.438136] INFO: trying to register non-static key.
[ 0.438180] the code is fine but needs lockdep annotation.
[ 0.438225] turning off the locking correctness validator.
[ 0.438277] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.3.0-rc4-next-20151009-00001-ga93b1a6f5055-dirty #237
[ 0.438353] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 0.438427] [<c0016780>] (unwind_backtrace) from [<c00132f0>]
(show_stack+0x10/0x14)
[ 0.438512] [<c00132f0>] (show_stack) from [<c0224884>]
(dump_stack+0x70/0xbc)
[ 0.438590] [<c0224884>] (dump_stack) from [<c006be20>]
(__lock_acquire+0xa84/0xb18)
[ 0.438667] [<c006be20>] (__lock_acquire) from [<c006c238>]
(lock_acquire+0x70/0x90)
[ 0.438746] [<c006c238>] (lock_acquire) from [<c05e8c88>]
(_raw_spin_lock_irqsave+0x48/0x5c)
[ 0.438830] [<c05e8c88>] (_raw_spin_lock_irqsave) from [<c02fea68>]
(pm_runtime_enable+0x14/0x5c)
[ 0.438921] [<c02fea68>] (pm_runtime_enable) from [<c03eee9c>]
(s3c24xx_i2c_probe+0x450/0x5f0)
[ 0.439006] [<c03eee9c>] (s3c24xx_i2c_probe) from [<c02f8180>]
(platform_drv_probe+0x50/0xac)
[ 0.439086] [<c02f8180>] (platform_drv_probe) from [<c02f683c>]
(driver_probe_device+0x1e0/0x418)
[ 0.439165] [<c02f683c>] (driver_probe_device) from [<c02f6b08>]
(__driver_attach+0x94/0x98)
[ 0.439250] [<c02f6b08>] (__driver_attach) from [<c02f4be8>]
(bus_for_each_dev+0x54/0x88)
[ 0.439332] [<c02f4be8>] (bus_for_each_dev) from [<c02f5da8>]
(bus_add_driver+0x178/0x254)
[ 0.439411] [<c02f5da8>] (bus_add_driver) from [<c02f72f8>]
(driver_register+0x78/0xf4)
[ 0.439488] [<c02f72f8>] (driver_register) from [<c00097f4>]
(do_one_initcall+0xb0/0x1f4)
[ 0.439571] [<c00097f4>] (do_one_initcall) from [<c0852dc4>]
(kernel_init_freeable+0x11c/0x1e8)
[ 0.439660] [<c0852dc4>] (kernel_init_freeable) from [<c05e2e04>]
(kernel_init+0x8/0xec)
[ 0.439740] [<c05e2e04>] (kernel_init) from [<c0010350>]
(ret_from_fork+0x14/0x24)
[ 0.439810] (null): Unbalanced pm_runtime_enable!
[ 0.440965] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
The message appears after second pm_runtime_enable().
Next without the patch works.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
