Hi Pavel,
On Monday 26 October 2015 05:17 PM, Pavel Fedin wrote:
The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO
initialization is required.
Signed-off-by: Pavel Fedin <p.fe...@samsung.com>
---
arch/arm/boot/dts/exynos5410-smdk5410.dts | 42 +++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts
b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index cebeaab..154e37b 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -35,6 +35,17 @@
reg = <0x02037000 0x1000>;
};
+ etherhet@07000000 {
%s/etherhet/ethernet/
+ compatible = "smsc,lan9115";
+ reg = <0x07000000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpx0>;
+ interrupts = <5 8>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ smsc,force-internal-phy;
+ };
+
};
&mmc_0 {
@@ -61,6 +72,27 @@
disable-wp;
};
+&pinctrl_0 {
+ srom_ctl: srom-ctl {
+ samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+ "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-drv = <0>;
+ };
+
+ srom_ebi: srom-ebi {
+ samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+ "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+ "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+ "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+ "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+ "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
&uart0 {
status = "okay";
};
@@ -72,3 +104,13 @@
&uart2 {
status = "okay";
};
+
+&sromc_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+ bank@3 {
+ bank = <3>;
+ width = <2>;
+ srom-timing = <1 9 12 1 9 1 1>;
+ };
+};
Thanks,
Pankaj Dubey
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
