On 29.10.2015 13:58, Alim Akhtar wrote:
> RTC found in s2mps15 is almost same as one found on s2mps14/13
> with few differences in RTC_UPDATE register fields, like
> bit fields are changed for WUDR and AUDR.
> This patch add required changes to enable s2mps15 rtc timer.
>
> Cc: Alexandre Belloni <alexandre.bell...@free-electrons.com>
> Signed-off-by: Alim Akhtar <alim.akh...@samsung.com>
> ---
> drivers/rtc/rtc-s5m.c | 20 ++++++++++++++++++--
> include/linux/mfd/samsung/rtc.h | 4 ++++
> 2 files changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
> index f2504b4eef34..0d106a99958f 100644
> --- a/drivers/rtc/rtc-s5m.c
> +++ b/drivers/rtc/rtc-s5m.c
> @@ -188,6 +188,7 @@ static inline int s5m_check_peding_alarm_interrupt(struct
> s5m_rtc_info *info,
> ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
> val &= S5M_ALARM0_STATUS;
> break;
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
> @@ -223,6 +224,9 @@ static inline int s5m8767_rtc_set_time_reg(struct
> s5m_rtc_info *info)
> if (info->device_type == S5M8763X || info->device_type == S5M8767X)
> data |= S5M_RTC_TIME_EN_MASK;
>
> + if (info->device_type == S2MPS15X)
> + data |= S2MPS15_RTC_WUDR_MASK;
> +
You are setting here bit 1 and bit 4. However vendor code sets only bit
4 (called WUDR there). That's confusing. Why the difference? Or maybe I
am looking at wrong vendor tree (SM-G920F)?
> ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
> if (ret < 0) {
> dev_err(info->dev, "failed to write update reg(%d)\n", ret);
> @@ -252,6 +256,9 @@ static inline int s5m8767_rtc_set_alarm_reg(struct
> s5m_rtc_info *info)
> case S5M8767X:
> data &= ~S5M_RTC_TIME_EN_MASK;
> break;
> + case S2MPS15X:
> + data |= S2MPS15_RTC_AUDR_MASK;
> + break;
> case S2MPS14X:
> data |= S2MPS_RTC_RUDR_MASK;
> break;
Another difference: you are setting here exactly the same values as
S2MPS13 - bit 1 and bit 4. However vendor code sets only bit 4 (called
WUDR there)?
What exactly is necessary to update alarm and time registers on S2MPS15?
> @@ -275,7 +282,6 @@ static inline int s5m8767_rtc_set_alarm_reg(struct
> s5m_rtc_info *info)
> if (info->device_type == S2MPS13X)
> regmap_update_bits(info->regmap, info->regs->rtc_udr_update,
> S2MPS13_RTC_AUDR_MASK, 0);
> -
This is not related to the patch.
Best regards,
Krzysztof
> return ret;
> }
>
> @@ -317,7 +323,8 @@ static int s5m_rtc_read_time(struct device *dev, struct
> rtc_time *tm)
> u8 data[info->regs->regs_count];
> int ret;
>
> - if (info->device_type == S2MPS14X || info->device_type == S2MPS13X) {
> + if (info->device_type == S2MPS15X || info->device_type == S2MPS14X ||
> + info->device_type == S2MPS13X) {
> ret = regmap_update_bits(info->regmap,
> info->regs->rtc_udr_update,
> S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK);
> @@ -339,6 +346,7 @@ static int s5m_rtc_read_time(struct device *dev, struct
> rtc_time *tm)
> break;
>
> case S5M8767X:
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
> @@ -366,6 +374,7 @@ static int s5m_rtc_set_time(struct device *dev, struct
> rtc_time *tm)
> s5m8763_tm_to_data(tm, data);
> break;
> case S5M8767X:
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> ret = s5m8767_tm_to_data(tm, data);
> @@ -414,6 +423,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct
> rtc_wkalrm *alrm)
> break;
>
> case S5M8767X:
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
> @@ -463,6 +473,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
> break;
>
> case S5M8767X:
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> for (i = 0; i < info->regs->regs_count; i++)
> @@ -508,6 +519,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
> break;
>
> case S5M8767X:
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> data[RTC_SEC] |= ALARM_ENABLE_MASK;
> @@ -548,6 +560,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct
> rtc_wkalrm *alrm)
> break;
>
> case S5M8767X:
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> s5m8767_tm_to_data(&alrm->time, data);
> @@ -631,6 +644,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
> ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
> break;
>
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
> @@ -679,6 +693,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> switch (platform_get_device_id(pdev)->driver_data) {
> + case S2MPS15X:
> case S2MPS14X:
> case S2MPS13X:
> regmap_cfg = &s2mps14_rtc_regmap_config;
> @@ -805,6 +820,7 @@ static const struct platform_device_id s5m_rtc_id[] = {
> { "s5m-rtc", S5M8767X },
> { "s2mps13-rtc", S2MPS13X },
> { "s2mps14-rtc", S2MPS14X },
> + { "s2mps15-rtc", S2MPS15X },
> { },
> };
> MODULE_DEVICE_TABLE(platform, s5m_rtc_id);
> diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h
> index 29c30ac36020..0be45fccc52b 100644
> --- a/include/linux/mfd/samsung/rtc.h
> +++ b/include/linux/mfd/samsung/rtc.h
> @@ -107,6 +107,10 @@ enum s2mps_rtc_reg {
> #define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT)
> #define S2MPS13_RTC_AUDR_SHIFT 1
> #define S2MPS13_RTC_AUDR_MASK (1 << S2MPS13_RTC_AUDR_SHIFT)
> +#define S2MPS15_RTC_AUDR_SHIFT 4
> +#define S2MPS15_RTC_AUDR_MASK (1 << S2MPS15_RTC_AUDR_SHIFT)
> +#define S2MPS15_RTC_WUDR_SHIFT 1
> +#define S2MPS15_RTC_WUDR_MASK (1 << S2MPS15_RTC_WUDR_SHIFT)
> #define S2MPS_RTC_RUDR_SHIFT 0
> #define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT)
> #define RTC_TCON_SHIFT 1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
